Hoover U8351900 Manual - Page 13

Powered pet hair cleaning tool Agitator brush roll B When agitator brush roll brushes on the powered pet hair cleaning tool are worn, the agitator brush roll should be replaced. Ask for HOOVER part No. 48414088. How to replace A 47 2. Unscrew the two Phillips screws and remove belt guard (B). 46 1. Remove tool from hose and turn it so bottom faces up. Press the latches on either side of tool and remove bottom plate (A). C 48 3. Remove agitator brush roll including end plates (C) and discard. 4. Inspect belt to ensure that it is in good condition. If belt is cracked, gouged or broken, replace it (see following section). D B 49 5. Insert agitator brush roll through belt and position belt over gear teeth (D) on agitator brush roll. C E 50 6. With curved ends down, slide end plates (C) of agitator brush roll into slots (E) on tool. 51 7. Replace belt guard (B) mak- ing sure not to pinch brush bristles in guard. Turn agitator brush roll, to make sure it rotates freely. Replace and tighten screws. 14