Hoover U9125-900 Manual - Page 6
Using the Z™ cleaner as an upright
UPC - 073502028292
View all Hoover U9125-900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
A B 06 Using the Z™ cleaner as an upright DO NOT USE CLEANER OUTDOORS OR ON DAMP OR WET SURFACES. Electrical cord 4 Open the tool/cord storage compartment (A), located on the side of the cleaner and remove the cord. The top cord hook swivels for quick cord release. ON/OFF and control panel 5 The DigiTouch™ control panel (B) is located at the handle base. Open tool/cord storage compartment to remove cord and plug cord into electrical outlet. Close storage door. To turn cleaner ON, press once. To turn cleaner OFF, press again. The control panel allows you to choose a cleaning mode for carpet height or hard surface floors. For best cleaning results, select the LOW setting. If the cleaner is difficult to push, select a higher setting. Select the type of carpet to be cleaned: HIGH for deep pile carpet, MED for medium pile, LOW for low pile, level loop, kitchen type, and other similar types, HARD SURFACE for bare floors. The agitator is OFF; the nozzle is set at LOW. Automatic agitator shutoff The agitator will turn off when the handle is in the upright, storage position in either the upright cleaner or canister cleaner (folded) positions.