Husqvarna 325HE3 Operation Manual
Husqvarna 325HE3 Manual
 |
View all Husqvarna 325HE3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Husqvarna 325HE3 manual content summary:
- Husqvarna 325HE3 | Operation Manual - Page 1
Operator′s manual 325HE3X-series 325HE4X-series Please read the operator's manual carefully and make sure you understand the instructions before using the machine. English - Husqvarna 325HE3 | Operation Manual - Page 2
use of a hedge trimmer can turn it into a dangerous tool that can cause serious or even fatal injury. It is extremely important that you read and understand the contents of this operator's manual. Please read the operator's manual carefully and make sure you understand the instructions before using - Husqvarna 325HE3 | Operation Manual - Page 3
stopping 13 WORKING TECHNIQUES General working instructions 15 Transport position 17 MAINTENANCE Carburettor starting: Please read the operator's manual carefully. WARNING! Long-term . WARNING! Incorrect or careless use of a ! hedge trimmer can turn it into a dangerous tool that can cause - Husqvarna 325HE3 | Operation Manual - Page 4
By following its′ content (using, service, maintenance etc) the life span and the second-hand value of the machine can be extended. If you will sell this machine, make sure that the buyer will get the operator′s manual. Thank you for using a Husqvarna product. Husqvarna AB has a policy of continuous - Husqvarna 325HE3 | Operation Manual - Page 5
Cutter 2 Bevel gear 3 Shaft 4 Hand guard (325HE3) 5 Hand guard mounting screw (325HE3) 6 Front handle (325HE3) 7 Angle adjustment knob 8 Stop switch 9 Throttle Front handle (325HE4) 23 Harness support hook (325HE4) 24 Transport guard 25 Operator′s manual 26 Harness (325HE4) 27 Allen key 28 Combination - Husqvarna 325HE3 | Operation Manual - Page 6
and qualified specialists. See instructions under the heading Maintenance. All covers and guards must be fitted before starting. Ensure that the spark plug cap and ignition lead are undamaged to avoid the risk of electric shock. IMPORTANT! Incorrect or careless use of a hedge trimmer can turn it into - Husqvarna 325HE3 | Operation Manual - Page 7
section. If your machine fails any of these checks contact your service agent to get it repaired. Throttle lockout The throttle lockout is return springs.This arrangement means that See instructions under the heading Start. Start the hedge trimmer and apply full throttle. Release the throttle - Husqvarna 325HE3 | Operation Manual - Page 8
when you move the stop switch to the stop setting. Hand guard (325HE3) WARNING! Overexposure to vibration ! can lead to circulatory damage or nerve is very important that you follow the instructions on checking, maintaining and servicing your machine. Never use a machine that has a faulty - Husqvarna 325HE3 | Operation Manual - Page 9
GENERAL SAFETY PRECAUTIONS Regularly check that the muffler is securely attached to the machine. Blades If the muffler on your machine is fitted with a spark arrestor mesh this must be cleaned regularly. A blocked mesh will cause the engine to overheat and may lead to serious damage. To ensure good - Husqvarna 325HE3 | Operation Manual - Page 10
ASSEMBLY Fitting the hand guard and loop handle (325HE3) Adjusting the harness (325HE4) 1 Slide the spacer into 1 Put on the harness. 2 Hook the machine onto the harness support hook. 3 Adjust the length of the harness so that the support hook is roughly level with your right hip. 3 Now make a fi - Husqvarna 325HE3 | Operation Manual - Page 11
or your clothes, change your clothes. Wash any part of your body that has come in contact with the machine is cleaned and that a complete service is carried out before long-term storage. • of catalytic converters. • Mixing ratio 1:50 (2%) with HUSQVARNA two-stroke oil. 1:33 (3%) with oils class JASO - Husqvarna 325HE3 | Operation Manual - Page 12
before starting. • Always use a fuel container with an anti-spill valve. • Clean the area around the fuel cap. Contamination in the tank can cause operating problems. • Ensure that the fuel is well mixed by shaking the container before filling the tank. 12 - English - Husqvarna 325HE3 | Operation Manual - Page 13
are tight. • Make sure the gear housing is lubricated correctly. See instructions under the heading Gear housing. • Check that the cutting attachment always features are in good working order. Never use a machine that lacks a part or has been modified outside its specifications. • All covers must be - Husqvarna 325HE3 | Operation Manual - Page 14
STARTING AND STOPPING Warm engine Primer bulb: Press the air purge repeatedly until fuel begins to fill the bulb. The bulb need not be completely filled. Starting Hold the body of the machine on the ground using your left hand (CAUTION! Not with your foot!). Grip the starter handle, slowly pull out - Husqvarna 325HE3 | Operation Manual - Page 15
instructions IMPORTANT! This section takes up the basic safety precautions for working with a hedge trimmer. If you encounter a situation where you are uncertain how to proceed you should ask an expert. Contact your dealer or your service the contents of the operator's manual. • Use your right hand - Husqvarna 325HE3 | Operation Manual - Page 16
cleaning the blades. Disconnect the HT lead from the spark plug. Safety instructions after completing work • The transport guard should always be fitted to hedge trimmer angle • Loosen the knob on the shaft (clockwise). • Store the machine out of reach of children. • Use only original spare parts - Husqvarna 325HE3 | Operation Manual - Page 17
) WORKING TECHNIQUES Once the work has been completed fold the cutting unit back against the shaft to simplify transport and storage of the hedge trimmer. 1 Turn off the engine. 2 Fit the transport guard to the cutting attachment. 3 Loosen the knob on the shaft (clockwise). 4 Grip the handle on - Husqvarna 325HE3 | Operation Manual - Page 18
MAINTENANCE Carburettor Your Husqvarna product has been designed and manufactured to specifi the idle speed cannot be ! adjusted so that the cutting attachment stops, contact your dealer/service workshop. Do not use the machine until it has been correctly adjusted or repaired. Adjustment - Husqvarna 325HE3 | Operation Manual - Page 19
mixture (too much or incorrect type of oil). • A dirty air filter. These factors cause deposits on the spark plug electrodes, which may result in operating problems and starting difficulties. If the machine is low on power, difficult to start or runs poorly at idle speed: always check the spark - Husqvarna 325HE3 | Operation Manual - Page 20
• Starting problems • Loss of engine power • Unnecessary wear to engine parts. • and subsequently approximately every 60 hours of operation. Use Husqvarna's special grease, no. 503 98 96-01. Cleaning air filter should be soaked in oil. See instructions under the heading Oiling the air filter. CAUTION - Husqvarna 325HE3 | Operation Manual - Page 21
MAINTENANCE Cleaning and lubrication Clean any resin and plant residue from the blades using cleaning agent 531 00 75-13 (UL22) before and after using the machine. Lubricate the blade bars with special grease, part no. 531 00 75-12 (UL 21) before long periods of storage. English - 21 - Husqvarna 325HE3 | Operation Manual - Page 22
maintenance and service work described in this Operator's Manual. More extensive work must be carried out by an authorized service workshop. X Check that the hand guard is not damaged. Replace the guard if damaged. (325HE3) X Check that nuts and screws are tight. X Check that there are no fuel - Husqvarna 325HE3 | Operation Manual - Page 23
TECHNICAL DATA Technical data Technical data 325HE3 Engine Cylinder displacement, cm3 24,5 Cylinder bore, mm 34,0 Stroke, mm 27 Idle speed, rpm 2700 Recommended max. speed, rpm 11000-12600 Max. engine output, - Husqvarna 325HE3 | Operation Manual - Page 24
AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare under sole responsibility that the hedge trimmers Husqvarna 325HE3 and 325HE4 from 2009's serial numbers and onwards (the year is clearly stated in plain text on the type plate with subsequent serial number), are - Husqvarna 325HE3 | Operation Manual - Page 25
- Husqvarna 325HE3 | Operation Manual - Page 26
- Husqvarna 325HE3 | Operation Manual - Page 27
- Husqvarna 325HE3 | Operation Manual - Page 28
Original instructions 1153292-26 ´´®®zz++UU==66¶¶66BB¨¨ 2010-03-08
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
 |
 |
English
325HE3
X-series
325HE4
X-series
Oper
ator
′
s manual
Please r
ead the operator’s manual carefully and make sure you understand the instructions
before using the machine.