Husqvarna 325HE3 Operation Manual - Page 17
Transport position
View all Husqvarna 325HE3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Transport position (325HE4) WORKING TECHNIQUES Once the work has been completed fold the cutting unit back against the shaft to simplify transport and storage of the hedge trimmer. 1 Turn off the engine. 2 Fit the transport guard to the cutting attachment. 3 Loosen the knob on the shaft (clockwise). 4 Grip the handle on the cutting unit and angle the cutting unit upwards. At an angle of 90 degrees there is a stop position. To pass the stop position, pull out the lock button. 5 Fold down the cutting unit against the shaft. 6 Turn the knob (anti-clockwise). CAUTION! When the stop position has been passed the blades are blocked, do not try to cut with the cutting unit in this position. English - 17
WORKING TECHNIQUES
English
–
17
Transport position
(325HE4)
Once the work has been completed fold the cutting unit
back against the shaft to simplify transport and storage of
the hedge trimmer.
1
Turn off the engine.
2
Fit the transport guard to the cutting attachment.
3
Loosen the knob on the shaft (clockwise).
4
Grip the handle on the cutting unit and angle the
cutting unit upwards. At an angle of 90 degrees there
is a stop position. To pass the stop position, pull out
the lock button.
5
Fold down the cutting unit against the shaft.
6
Turn the knob (anti-clockwise).
CAUTION!
When the stop position has been passed the
blades are blocked, do not try to cut with the cutting unit
in this position.