Husqvarna AUTOMOWER 220 AC Owners Manual - Page 55

6. MENU FUNCTIONS • Test IN (3-2-4) The Test IN (3-2-4) function is used to test how Automower finds its way into the charging station. Follow loop out Follow loop in Corridor width Test IN Test OUT 3-2-4 When the function is selected the mower will immediately follow the boundary wire, guide 1 or guide 2, depending on which one it finds first, in to the charging station. If there is a passage and the mower can not run through it, the Corridor width value is set too high. When Test IN is activated, the mower runs at the greatest distance from the wire that the selected corridor width permits. 8 The adjacent picture shows how Automower negotiates a passage when a value of 8 is set for the Corridor width, but not when a value of 10 is set. IMPORTANT INFORMATION When Test IN (3-2-4) is used, the house icon on the display will come on and the mower will remain in the charging station. Press the Home button to return to operations. • Test OUT (3-2-5) The Test OUT (3-2-5) function is used to try different charge exit settings and to find out how far it is from the charging station to a remote area. To test the settings for Follow loop out (3-2-1): • State the value 100 % for Proportion for the remote area to be tested and 0 % for the other areas. Place Automower in the charging station and select Test OUT (3-2-5). The mower will now leave the charging station directly according to the stated direction and start mowing after the stated distance. Reset the Proportion values when testing is finished. Follow loop out Follow loop in Corridor width Test IN Test OUT 3-2-4 10 3012-672 56 - English