Husqvarna DT22 Owners Manual - Page 23

Replacing worn flail blades, IMPORTANT INFORMATION, When tipping the machine forward observe

Page 23 highlights

MAINTENANCE Replacing worn flail blades 1. Allow the engine to cool. 2. Disconnect the spark plug. 3. Tip the machine forward; see the section "Two minute rule". IMPORTANT INFORMATION When tipping the machine forward observe the "Two minute rule". 4. Remove e-rings (1) (locking washer type) that hold the blade shaft (2) in place (see the illustration). 5. Inspect the blade shafts and replace if bent or worn. 6. Drive the blade shafts out towards the center. The blades (4) and the plastic spacers (3) will fall off. 7. Fit the new blades and replace the plastic spacers as necessary. Refer to the illustration of the components for blade/spacer placement. 8. Install e-rings. 9. Repeat this procedure for the remaining three shafts. 10. Reattach the spark plug cable. 43 2 1 8011-027 8062-020 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

MAINTENANCE
23
Replacing worn flail blades
AllOw the engine tO cOOl.
1.
DiscOnnect the spark plug.
2.
Tip the machine fOrward; see the sectiOn “TwO
3.
minute rule”.
RemOve e-rings (1) (lOcking washer type) that hOld
4.
the blade shaft
(2) in place (see the illustratiOn).
Inspect the blade shafts and replace if bent Or
5.
wOrn.
Drive the blade shafts Out tOwards the center. The
6.
blades (4) and the plastic spacers (3) will fall Off.
Fit the new blades and replace the plastic spacers
7.
as necessary. Refer tO the illustratiOn Of the
cOmpOnents fOr blade/spacer placement.
Install e-rings.
8.
Repeat this prOcedure fOr the remaining three
9.
shafts.
Reattach the spark plug cable.
10.
IMPORTANT INFORMATION
When tipping the machine forward observe the
“Two minute rule”.
8062-020
1
2
3
4
8011-027