Husqvarna FT900 Owners Manual - Page 7

How To Use Your Tiller, Tilling, Tine Operation See Fig. 5, Stopping See Fig. 5 - tillers

Page 7 highlights

OPERATION The operation of any tiller can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields before starting your tiller and while tilling. We recommend a wide vision safety mask over spectacles or standard safety glasses. 00155 HOW TO USE YOUR TILLER Know how to operate all controls before adding fuel and oil or attempting to start engine. STOPPING (See Fig. 5) TINES • Release forward tine control to stop forward move- ment. • Release reverse tine control to stop reverse move- ment. ENGINE • Move throttle control to "STOP" position. • Never use choke to stop engine. REVERSE TINE CONTROL IN "OFF" (UP) POSITION REVERSE TINE CONTROL IN "ON" (DOWN) POSITION FORWARD TINE CONTROL IN "OFF" (UP) POSITION TILLING The speed and depth of tilling is regulated by the position of the depth stake and wheel height. The depth stake should always be below the wheels for digging. It serves as a brake to slow the tiller's forward motion to enable the tines to penetrate the ground. Also, the more the depth stake is lowered into the ground the deeper the tines will dig. DEPTH STAKE (See Fig. 6) Adjust depth stake by removing the hairpin clip and clevis pin. Change depth stake to desired position. Replace the clevis pin and hairpin clip. • For normal tilling, set depth stake at the second or third hole from the top. WHEELS (See Fig. 6) Adjust wheels by removing the hairpin clip and clevis pin. Change wheel position. Replace the hairpin clip and clevis pin. • For normal tilling, set wheels at the second or third hole from the top. FORWARD TINE CONTROL IN "ON" (DOWN) POSITION depth_stake_4 handles_94 HAIRPIN CLIP AND CLEVIS PIN THROTTLE CONTROL CHOKE CONTROL engine_art_71 Fig. 5 TINE OPERATION (See Fig. 5) FORWARD • With reverse tine control in the "OFF" (up) position, Squeeze forward tine control to handle. REVERSE • With forward tine control in the "OFF" (up) position, Squeeze reverse tine control to handle. 7 STAKE SPRING WHEEL Fig. 6 DEPTH STAKE

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

7
OPERATION
depth_stake_4
Fig. 6
DEPTH
STAKE
HAIRPIN CLIP
AND CLEVIS PIN
STAKE
SPRING
WHEEL
00155
The operation of any tiller can result in foreign objects thrown into the eyes, which can result
in severe eye damage.
Always wear safety glasses or eye shields before starting your til-
ler and while tilling.
We recommend a wide vision safety mask over spectacles or standard
safety glasses.
TILLING
The speed and depth of tilling is regulated by the position
of the depth stake and wheel height.
The depth stake should always be below the wheels for
digging.
It serves as a brake to slow the tiller’s forward
motion to enable the tines to penetrate the ground.
Also,
the more the depth stake is lowered into the ground the
deeper the tines will dig.
DEPTH STAKE (See Fig. 6)
Adjust depth stake by removing the hairpin clip and clevis
pin.
Change depth stake to desired position.
Replace the
clevis pin and hairpin clip.
For normal tilling, set depth stake at the second or third
hole from the top.
WHEELS (See Fig. 6)
Adjust wheels by removing the hairpin clip and clevis pin.
Change wheel position.
Replace the hairpin clip and clevis
pin.
For normal tilling, set wheels at the second or third
hole from the top.
engine_art_71
handles_94
FORWARD
TINE CONTROL
IN “OFF” (UP)
POSITION
REVERSE TINE
CONTROL IN
“OFF” (UP)
POSITION
CHOKE
CONTROL
THROTTLE
CONTROL
FORWARD TINE CONTROL
IN “ON” (DOWN) POSITION
REVERSE TINE
CONTROL
IN “ON” (DOWN)
POSITION
TINE OPERATION (See Fig. 5)
FORWARD
With reverse tine control
in
the “OFF” (up) position,
Squeeze forward tine control to handle.
REVERSE
With forward tine control in the “OFF” (up) position,
Squeeze reverse tine control to handle.
Fig. 5
HOW TO USE YOUR TILLER
Know how to operate all controls before adding fuel and
oil or attempting to start engine.
STOPPING (See Fig. 5)
TINES
Release forward tine control to stop forward move-
ment.
Release reverse tine control to stop reverse move-
ment.
ENGINE
Move throttle control to “STOP” position.
Never use choke to stop engine.