Husqvarna MZ 52LE Limited Edition Operation Manual - Page 14
Choke Control, Blade Switch, Ignition Switch, Service Meter, Seat Adjustment Lever
View all Husqvarna MZ 52LE Limited Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
CONTROLS Choke Control Service Meter The choke control is used for cold starts to provide the engine with a richer fuel mixture. For cold starts, pull the control up. Blade Switch The service meter displays the total number of hours the engine has run and indicates when the engine and mower need servicing. After every 50 hours of operation, an oil can icon will appear and stay on for two hours, before an automatic reset occurs. To manually reset the meter, turn the key off and on five times at one second intervals. To service the engine and mower, see the Service Journal of this manual. Note: The service meter operates (clocks hours) only when the engine is running. Be sure to turn the key off when the unit is not in use, to prevent meter hours from accumulating. Seat Adjustment Lever To engage the mower deck, pull the knob out; mower blades are disengaged when the knob is pressed down. Ignition Switch The seat can be adjusted lengthways. The lever under the front edge of the seat is moved to the left (as seen by the driver in the seat), to adjust the seat backward or forward. IMPORTANT INFORMATION Seat must not be adjusted while unit is in motion. The ignition switch is placed on the control panel and is used to start and stop the engine. On models equipped with headlights, turn the key clockwise to ACCESSORY for headlight use. 14