Husqvarna MZ 52LE Limited Edition Operation Manual - Page 28
LUBRICATION, General, Lubrication Schedule
View all Husqvarna MZ 52LE Limited Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
L U B R I C AT I O N Lubrication Schedule * Change hydraulic drive filters. p Change engine oil every 50 hours. 12/12 Every year Lubricate with grease gun 1/52 Every Week Filter change 1/365 Every day Oil change Level check General Remove the ignition key to prevent unintentional movements during lubrication. When lubricating with an oil can, it must be filled with engine oil. When lubricating with grease, unless otherwise stated, use high grade molybdenum disulphide grease. For daily use, the machine must be lubricated twice weekly. Wipe away excess grease after lubrication. It is important to avoid getting lubricant on the belts or the drive surfaces on the belt pulleys. If this happens, clean them with spirits. If the belt continues to slip after cleaning, it must be replaced. Gasoline or other petroleum products must not be used to clean belts. IMPORTANT INFORMATION Use minimal lubrication and remove excess lubricant so that is does not come into contact with belts or belt pulley drive surfaces. 28