Husqvarna R 322T AWD Owners Manual - Page 27
Checking the engine’s cooling air intake, Fitting the cutting head
View all Husqvarna R 322T AWD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Maintenance Checking the engine's cooling air intake Clean the air intake grille in the engine cover behind the driver's seat. 3 Push the equipment frame down and place the catch against the frame. 4 Engage the belt in the belt holder. Open the engine cover. Check that the cooling intake is free from leaves, grass and dirt. A blocked cooling intake will interfere with the cooling of the engine, which can damage the engine. 5 Push the deck in and put the front guide plugs in the grooves on the equipment frame, one on each side. WARNING! The cooling air intake rotates ! when the engine is running. Mind your fingers. Fitting the cutting head WARNING! Wear protective glasses when ! fitting the cutting unit. The spring which tensions up the belt may break and cause personal injury. 1 Place the Rider on a flat surface and apply the parking brake. 2 Check that the lever for setting the cutting height is in the lowest position and that the lifting lever for the cutting unit is in mowing position. WARNING! Observe caution to avoid ! trapping your hand. 6 Lift up the cutting unit 7 Push the unit in so that the interior plugs touch the bottom of the equipment frame's grooves. English - 27