Husqvarna R 322T AWD Owners Manual - Page 30

Maintenance 7 Remove the screws on the cutting cover. Lift the unit frame and remove the cutting unit cover. 4 Disengage the spring for the drive belt tensioning wheel. 8 Loosen the spring that tensions the V-belt and pry off the belt. 5 Loosen on the cutting height stay and place in the holder. Assemble the parts in the reverse order. Service position for the cutting unit The cutting head can be placed in the service position to provide easy access for cleaning, repairs and servicing. In the service position the cutting unit is raised and locked in the vertical position. Placing in the service position 1 Position the machine on flat ground. Apply the parking brake. 2 Set the cutting height control in the lowest position and lift up the cutting unit. WARNING! Observe caution to avoid ! trapping your hand. 6 Remove the drive belt and place it in the belt holder. 7 Grip the front edge of the unit and pull forwards until it stops. 3 Remove the front cover. 8 Lift the unit until it stops and a clicking sound is heard. The unit locks automatically in the vertical position. WARNING! Wear protective glasses when ! dismantling the cutting unit. The spring which tensions up the belt may break and cause personal injury. 30 - English