Husqvarna RZ4824F Owners Manual - Page 39

Tire Pressures, Anti-scalp Rollers, Adjust anti-scalp rollers with the mower on

Get Husqvarna RZ4824F PDF manuals and user guides View all Husqvarna RZ4824F manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

MAINTENANCE Tire Pressures All tires should be at 15 psi / 103 kPa / 1 bar. Check tire pressures 8011-564 Anti-Scalp Rollers Anti-scalp rollers are properly adjusted when they are just slightly off of the ground when the deck is at the desired cutting height in the operating position. Antiscalp rollers then keep the deck in the proper position to help prevent scalping in most terrain conditions. IMPORTANT INFORMATION Adjust anti-scalp rollers with the mower on a flat level surface. The anti-scalp rollers can be set in three positions: • Upper position 1½ to 2½" (38 to 64 mm) grass • Middle position 2½" to 4" (64 to 102 mm) grass • Lower position 4" to 6" (102 to 128 mm) grass. The rollers should be approximately ¼" (6.5 mm) from ground. Do not adjust the rollers to support the deck. Anti-scalp rollers 8050-830 IMPORTANT INFORMATION To avoid deck damage, the anti-scalp rollers must not be adjusted to support the deck. 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
39
MAINTENANCE
Tire Pressures
All tires should be at 15 psi / 103 kPa / 1 bar.
8011-564
Check tire pressures
Anti-Scalp Rollers
Anti-scalp rollers are properly adjusted when they are
just slightly off of the ground when the deck is at the
desired cutting height in the operating position. Anti-
scalp rollers then keep the deck in the proper position
to help prevent scalping in most terrain conditions.
IMPORTANT INFORMATION
Adjust anti-scalp rollers with the mower on a
flat level surface.
The anti-scalp rollers can be set in three positions:
•
Upper position 1½ to 2½" (38 to 64 mm) grass
•
Middle position 2½" to 4" (64 to 102 mm) grass
•
Lower position 4" to 6" (102 to 128 mm) grass.
The rollers should be approximately ¼" (6.5 mm) from
ground. Do not adjust the rollers to support the deck.
8050-830
Anti-scalp rollers
IMPORTANT INFORMATION
To avoid deck damage, the anti-scalp rollers
must not be adjusted to support the deck.