Husqvarna RZ4824F Owners Manual - Page 44
Caster Wheels, Cleaning, Hardware, Removal and installation - warranty
View all Husqvarna RZ4824F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
MAINTENANCE Caster Wheels Check every 200 hours. Check that wheels rotate freely. If wheels do not rotate freely take the unit to your dealer for service. Foam filled tires or solid tires will void the warranty. Removal and installation 1. Remove nut and caster bolt. 2. Pull the wheel out of the yoke and retain the spacer for reuse. 3. Install in reverse order. 4. Tighten caster bolt. 1 2 IMPORTANT INFORMATION DO NOT add any type of tire liner or foam fill material to the tires. Excessive loads created by foam filled tires will cause premature failures. Only use O.E.M. specified tires. 1. Caster yoke 2. Caster long spacer Caster wheels 8011-619-4 Cleaning Regular cleaning, especially under the mower deck, will increase the machine's life-span. Make it a habit to clean the machine directly after use (after it is cooled), before the debris sticks. Do not spray water on the top of the mower deck. Use compressed air to clean the top side of mower deck. Regularly clean the underside of the deck with normal water pressure. Do not use a high pressure washer or steam cleaner. Avoid spraying engine and electrical components with water. For models fitted with a cleanout port, attach the quick connect (from the accessory packet) to any garden hose. After mowing, snap the hose to the cleanout port and turn on water supply. Restart the mower and engage the blades to use the spinning action to wash away debris. Make sure the hose is away from the mower blades. Do not rinse hot surfaces with cold water. Let unit cool before washing. Hardware Check daily. Inspect the entire machine for loose or missing hardware. IMPORTANT INFORMATION Use protective glasses when cleaning and washing. Clean regularly 8058-084 44