Husqvarna RZ4824F Owners Manual - Page 40

Cutting Blades, Blade replacement

Get Husqvarna RZ4824F PDF manuals and user guides View all Husqvarna RZ4824F manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

MAINTENANCE Cutting Blades In order to attain the best mowing effect, it is important that the blades are well sharpened and not damaged. Bent or cracked blades or blades with large nicks should be replaced. IMPORTANT INFORMATION The sharpening of blades should be carried out by an authorized service workshop. Damaged blades should be replaced when hitting obstacles that result in a breakdown. Let the service workshop decide whether the blade can be repaired/ ground or must be replaced. Balance the blades after sharpening. Check the blade mounts. Check the blades WARNING! Blades are sharp. Protect your hands with gloves and/or wrap blades with a heavy cloth when handling. 8011-604-1 Blade replacement 1. Remove blade bolt by turning counterclockwise. 2. Install new or resharpened blade with stamped "GRASS SIDE" facing towards ground/grass (down) or "THIS SIDE UP" facing deck and cutter housing. 3. Install and tighten blade bolt securely. 4. Torque blade bolt to 90 ft/lbs (122 Nm). 1 2 IMPORTANT INFORMATION Special blade bolt is heat treated. Replace with a Husqvarna bolt if required. Do not use lower grade hardware than specified. 1. Blade 2. Blade bolt (special) 3. Cutter housing Blade attachment 3 8058-027 40

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
40
mAINTENANCE
2
1
3
Blade replacement
ReMove blade bolt bY turning counterclockwise.
1.
Install new or resharpened blade with staMped
2.
“GRASS SIDE” Facing towards ground/grass
(down) or “THIS SIDE UP” Facing deck and cutter
housing.
Install and tighten blade bolt securelY.
3.
Torque blade bolt to 90 Ft/lbs (122 NM).
4.
IMPORTANT INFORMATION
Special blade bolt is heat treated.
Replace with a Husqvarna bolt if required.
Do not use lower grade hardware than
specified.
8058-027
Blade
1.
Blade bolt (special)
2.
Cutter housing
3.
Blade attachment
Cutting Blades
In order to attain the best Mowing eFFect, it is iMportant
that the blades are well sharpened and not daMaged.
Bent or cracked blades or blades with large nicks
should be replaced.
IMPORTANT INFORMATION
The sharpening of blades should be carried
out by an authorized service workshop.
WARNING!
Blades are sharp. Protect your hands
with gloves and/or wrap blades with
a heavy cloth when handling.
8011-604-1
Check the blades
DaMaged blades should be replaced when hitting
obstacles that result in a breakdown. Let the service
workshop decide whether the blade can be repaired/
ground or Must be replaced.
Balance the blades aFter sharpening.
Check the blade Mounts.