Husqvarna RZ4824F Owners Manual - Page 45
Front Wheel Mount, Front Wheel Bearings, Deck Spindles, Transmission, IMPORTANT INFORMATION - deck belt
View all Husqvarna RZ4824F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
LUBRICATION Front Wheel Mount Lubricate with a grease gun, one zerk for each wheel mount, until the grease is forced out. Use only good quality bearing grease. Grease from well-known brand names (petrochemical companies) usually maintains a good quality. Front Wheel Bearings Lubricate with a grease gun, one zerk for each set of wheel bearings, until the grease is forced out. Use only good quality bearing grease. Lubricating the front wheels IMPORTANT INFORMATION Use minimal lubrication and remove excess lubricant so that is does not come into contact with belts or belt pulley drive surfaces. Deck Spindles Lower the cutting deck completely. If a grease gun without a rubber hose is used, the foot plate must be removed. Lubricate with a grease gun, 2-3 strokes per spindle. 8058-068 Deck spindle Transmission The transmission is maintenance free with no need for level checks or oil changes. If a leak occurs, replace the unit or contact your Husqvarna dealer. 80158-136 45