Husqvarna Z146 Owner Manual - Page 13
Steering Control Levers, Park Brake, Ignition Switch, WARNING, IMPORTANT INFORMATION
View all Husqvarna Z146 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
CONTROLS Steering Control Levers WARNING! The machine can turn very rapidly if one steering control is moved much further forward than the other. Park Brake The machine's speed and direction are continuously variable using the two steering controls. The steering controls can be moved forward or backward about a neutral position. There is a neutral position, which is locked if the steering controls are moved out. When both controls are in the neutral position (N), the machine stands still. By equally moving both controls forward or backward, the machine moves in a straight line forward or backward. For example, to turn right while moving forward, move the right control towards the neutral position. The rotation of the right wheel is reduced and the machine turns to the right. Zero turn can be achieved by moving one control backward (behind the neutral position) and carefully moving the other steering control forward from its neutral position. The rotation direction when zero turning is determined by which steering control is moved backward behind the neutral position. If the left steering control is pulled backward, the machine turns to the left. Use more care when using this maneuver. If the steering controls are in uneven positions when standing still or do not fit in the slots for moving the controls out, they can be adjusted. The park brake is integrated with the steering control levers. Move both levers out from the neutral position to engage the park brake. To release the park brake, pull both steering control levers inwards to the neutral position at the same time. Do not try to operate the unit without both levers being inwards out of the engaged position or machine components could be damaged. IMPORTANT INFORMATION Failure to bring the steering / park brake controls inward at the same time will cause the unit's safety system to shut the unit down. Ignition Switch Forward Neutral Park Brake Reverse The ignition switch is on the control panel and is used to start and stop the engine. 13