Husqvarna Z554L Owner Manual

Husqvarna Z554L Manual

Husqvarna Z554L manual content summary:

  • Husqvarna Z554L | Owner Manual - Page 1
    % de etanol (E10) anulará la garantía del producto. 114 24 91-27 Operator Manual Manual del operador Z554L / 97050500100 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of 10% ethanol (E10) is permitted
  • Husqvarna Z554L | Owner Manual - Page 2
    be supplied with the machine at delivery or written in the Engine manual. Take care of them as they are valuable documents. WARNING! Failure persons. The owner must understand these instructions, and must let only approved persons who understand these instructions to operate the mower. Each person
  • Husqvarna Z554L | Owner Manual - Page 3
    Blades 28 Transaxle Fluid Change 29 TROUBLESHOOTING 30 STORAGE 31 SCHEMATIC 32 TECHNICAL DATA 33 SERVICE JOURNAL 35 INTRODUCCIÓN 43 Conducción 56 OPERACIÓN 57 Capacitación 57 Trabajo en pendientes 59 Movimiento manual de la máquina 60 MANTENIMIENTO 61 Batería 63 Sistema de seguridad
  • Husqvarna Z554L | Owner Manual - Page 4
    regulated by steering controls each contribute to the machine's performance. This manual is a valuable document. Read the contents carefully before using or servicing the machine. The following of instructions (use, service, maintenance) by all who operate this machine is important for the
  • Husqvarna Z554L | Owner Manual - Page 5
    and support throughout the life of the product. If you need to order a spare part, make a warranty claim, or you have service-related questions, please consult the following professional: This manual belongs to the machine with the manufacturing number: Engine Transmission Manufacturing Number
  • Husqvarna Z554L | Owner Manual - Page 6
    xxxxxx xxxxxxxxx. Used in this publication to tell the reader of a risk of material damage, particularly if the reader neglects to obey the instructions in the manual. Used also when there is a possibility for misuse or misassembly. Used in this publication to tell the reader of a risk of personal
  • Husqvarna Z554L | Owner Manual - Page 7
    General Operation • Read, understand, and obey all instructions on the machine and in the manual before starting. • It is recommended that someone knows • Those who operate, maintain, and/or service this machine must first read and understand this Operator Manual. Local laws can regulate the age of
  • Husqvarna Z554L | Owner Manual - Page 8
    SAFETY • Disengage blades when not mowing. Shut off engine and wait for all parts to come to a full stop before cleaning the machine, removing the grass catcher or unclogging the discharge guard. • Do not operate the machine while under the influence of alcohol or drugs. • Look for traffic when
  • Husqvarna Z554L | Owner Manual - Page 9
    leaks occur in fuel system, the engine must not be started until problem has been resolved. • Check the fuel level before each use and work. • Maintain or replace safety and instruction labels as necessary. • Do not interfere and service as necessary. • Do not work with the starter circuit if
  • Husqvarna Z554L | Owner Manual - Page 10
    you spill battery acid on your skin, rinse immediately with water. • Acid in the eyes can cause blindness, contact a doctor immediately. • Be careful when servicing the battery. Explosive gases form in the battery. Do not do maintenance on the battery when smoking or near open flames or sparks. The
  • Husqvarna Z554L | Owner Manual - Page 11
    ROPS as a lifting, attaching or anchoring point. • Do not use ROPS for wrecking or towing. • Do not exceed Max GVW: 2822 lbs. • Read the operator manual before use. • Securely fasten the seat belt if the unit has a ROPS. • Be certain the seat belt operates correctly and can be released quickly in
  • Husqvarna Z554L | Owner Manual - Page 12
    CONTROLS CONTROLS This operator manual describes the Husqvarna Zero Turn Rider. 11 3 12 13 1 2 14 15 1. Steering / park brake controls 2. Tracking controls 3. Fuel gauges 4. Service meter 5. Fuel tank caps 6. Fuses 7. Fuel tank selector 8. Choke control 9. Ignition switch 10. Throttle control 12
  • Husqvarna Z554L | Owner Manual - Page 13
    CONTROLS Steering Control Levers Park Brake The machine's speed and direction are continuously variable using the two steering controls. The steering controls can be moved forward or backward about a neutral position. There is a neutral position, which is locked if the steering controls are moved
  • Husqvarna Z554L | Owner Manual - Page 14
    turn the key clockwise to ACCESSORY for headlight use. Choke Control The service meter is located on the left hand control panel and shows the on five times at one second intervals. To service the engine and mower, see the Service Journal of this manual. Fuel Gauges The choke control is used for
  • Husqvarna Z554L | Owner Manual - Page 15
    battery and hydro gears. Push down on the latch lever to release the seat. Raise the seat until the rod engages. Fuses Read the safety instructions before refueling. The capacity for each tank is 6 gallons (22.7 liters). Regularly check the gas cap gasket for damage and keep the cap properly
  • Husqvarna Z554L | Owner Manual - Page 16
    leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system must be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until
  • Husqvarna Z554L | Owner Manual - Page 17
    OPERATION O P E R AT I O N Read the Safety section and following pages, if you are unfamiliar with the machine. Training Due to unique steering capabilities, zero turn mowers are far more maneuverable than typical riding mowers. Review this section fully before trying to move the mower under its
  • Husqvarna Z554L | Owner Manual - Page 18
    INFORMATION Leaving the ignition switch in a position other than OFF will cause the battery to be discharged. Operating on Hills Read the Safety Instructions Driving on Slopes in the Safety section. • Use the slowest speed possible before starting up or down hills. • If stopping is fully necessary
  • Husqvarna Z554L | Owner Manual - Page 19
    O P E R AT I O N WARNING! Do not drive the rider on terrain that slopes more than 10 degrees. Mow slopes up and down, never side to side. Avoid sudden directional changes. Mowing Tips • Find and flag rocks and other fixed objects to avoid collisions. • Begin with a high cutting height and reduce it
  • Husqvarna Z554L | Owner Manual - Page 20
    procedures that must be performed on the machine. For those points not described in this manual, visit an authorized service workshop. An annual service carried out by an authorized service workshop is recommended to maintain your machine in the best possible condition and to ensure safe
  • Husqvarna Z554L | Owner Manual - Page 21
    starter 3) (every 500 hours) Perform the 500-hour service 3) ■ ● ● ● ♦ ■ ■ ■■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ● ● ● ● ♦ ♦ ♦ ● = Described in this manual ♦ = Not described in this manual ■ = Refer to the engine manufacturer's manual 1) First change after 8-10 hours. When operating with
  • Husqvarna Z554L | Owner Manual - Page 22
    The mower is equipped with a maintenance free battery and does not need servicing. However, periodic charging of the battery with an automotive type battery battery to lose power. 1. Lift and rotate the seat fully forward until supported by the seat rod. 2. Remove the bolt and nut from the battery
  • Husqvarna Z554L | Owner Manual - Page 23
    a 1/2" wrench and set the belt guide aside. CAUTION! Blades are sharp. Protect your hands with gloves and/or wrap blades with a heavy cloth when handling. The sharpening of blades should be carried out by an authorized service workshop. Let the service workshop decide whether a blade with large
  • Husqvarna Z554L | Owner Manual - Page 24
    MAINTENANCE Pump Belt The belts are not adjustable and need to be replaced if they begin to slip from wear. Park the mower on a level surface. Engage the park brake. 1. Remove the deck belt. 2. Remove clutch stop to access the belt. Four bolts control the height and pitch of the mower deck. Adjust
  • Husqvarna Z554L | Owner Manual - Page 25
    Neutral Adjustment Perform the adjustment with the machine parked on level ground and the park brake engaged. 1. Raise the rear wheels of the machine and support it with jack stands. 2. Start the engine. If the either wheel turns while the machine's park brake is engaged, the neutral linkage for the
  • Husqvarna Z554L | Owner Manual - Page 26
    surface. To avoid deck damage, the anti-scalp rollers must not be adjusted to support the deck. Anti-scalp rollers can be set in three positions. • Upper wheels do not rotate freely take the unit to the dealer for service. Regular cleaning and washing, especially under the mower deck, will increase
  • Husqvarna Z554L | Owner Manual - Page 27
    LUBRICATION L U B R I C AT I O N Lubrication Schedule 12/12 1/52 1/365 Every year Every Week Every day * Initial hydraulic oil and filter change at 100 hrs, every 400 hrs thereafter. p Change engine oil every 50 hours. Lubricate with grease gun Filter change Oil change Level check General
  • Husqvarna Z554L | Owner Manual - Page 28
    oil when the engine is warm. Refer to the engine owner's manual for the correct replacement oil and filter change recommendations. Wheel and fill cap securely when the oil level is FULL. 9. Refer to the Service Journal for oil checking and changing intervals. Lower the cutting deck completely.
  • Husqvarna Z554L | Owner Manual - Page 29
    L U B R I C AT I O N Transaxle Fluid Change Fluid and Filter Change The hydraulic drive is designed with an external filter for ease of maintenance. To ensure constant fluid quality levels and longer life, an oil filter change interval of every 400 hours is recommended. Drain old oil filters of all
  • Husqvarna Z554L | Owner Manual - Page 30
    TROUBLESHOOTING TROUBLESHOOTING Problem / Cause Engine will not start Blade switch is engaged Steering controls are not locked in the park brake position Dead battery Contamination in the carburetor
  • Husqvarna Z554L | Owner Manual - Page 31
    battery in a cool place, but protect it from direct cold. 8. Store the machine in a clean, dry place and cover it for extra protection. Service When ordering spare parts, please specify the purchase year, model, type, and serial number. Always use genuine Husqvarna spare parts. An annual check-up at
  • Husqvarna Z554L | Owner Manual - Page 32
    MG Key Switch Positions Position 2 - Run / Lights Position 3 - Run SBA S B A L Y MG L Y MG Position 4 - Start B S A L Y MG Engine Ground Blk Service Meter Blk Accessory Outlet Red / Blk T-3 Grn Blk / Yel T-1 Blk T-2 Purple Blk 20 AMP Red Seat Timer Module T-5 Wht Timer
  • Husqvarna Z554L | Owner Manual - Page 33
    , turf pneumatic Tire pressure FRAME Cutting Width Cutting Height Number of Blades Blade Length Anti-scalp roller Seat Hinged Arm Rests Service Meter Blade Engagement Deck Construction Productivity DIMENSIONS Weight Base Machine Length Base Machine Height Base Machine Width Overall Width, Chute Up
  • Husqvarna Z554L | Owner Manual - Page 34
    TECHNICAL DATA Torque Specifications Engine crankshaft bolt 50 ft/lb Deck pulley bolts 150 ft/lb Lug nuts 75 ft/lb Spark Plug Torque 16 ft-lb (22 Nm) Blade bolt 90 ft/lb Standard 1/4" fasteners Standard 5/16" fasteners Standard 3/8" fasteners Standard 7/16" fasteners Standard 1/2"
  • Husqvarna Z554L | Owner Manual - Page 35
    speed Engine high idle speed Inform the customer about: Need and advantages of following the service schedule Need and advantages of leaving the machine for service Effects of service and maintaining a service journal on the machine's resale value Application areas for mulching Fill in the sales
  • Husqvarna Z554L | Owner Manual - Page 36
    position Check safety system Check seat belt Check ROPS Check fuel system for leaks Inspect safety guards and shields Check brake adjustment DAILY SERVICE Action Clean debris from mower Check engine oil level Check the tire pressures Check underside of deck Inspect deck pulleys Check/clean the
  • Husqvarna Z554L | Owner Manual - Page 37
    JOURNAL 50-HOUR SERVICE Action Clean debris from mower Check engine oil level Check the tire pressures Check underside of deck Inspect deck pulleys Check/clean the engine's cooling
  • Husqvarna Z554L | Owner Manual - Page 38
    JOURNAL 250-HOUR SERVICE Action Grease fittings (caster pivots and caster wheels) Inspect dampers Inspect frame Inspect throttle and choke cables Inspect hardware Check the tire pressures Change the
  • Husqvarna Z554L | Owner Manual - Page 39
    JOURNAL 500-HOUR SERVICE Action Grease fittings (caster pivots and caster wheels) Inspect dampers Inspect frame Inspect throttle and choke cables Inspect hardware Check the tire pressures Change the
  • Husqvarna Z554L | Owner Manual - Page 40
    SERVICE JOURNAL AT LEAST ONCE EACH YEAR Action Clean the engine's cooling air intake Replace the air cleaner's foam pre-filter Replace the air filter's paper
  • Husqvarna Z554L | Owner Manual - Page 41
    SERVICE JOURNAL 41
  • Husqvarna Z554L | Owner Manual - Page 42
    estas etiquetas. También es posible que se incluyan certificados con la máquina en el momento de su entrega o que estén escritos en el manual del motor. Cuídelos porque son documentos valiosos. ADVERTENCIA: No seguir las prácticas de operación con cautela puede provocar lesiones graves al operador
  • Husqvarna Z554L | Owner Manual - Page 43
    cilmente accesible para el operador y una transmisión hidrostática regulada por controles de la dirección contribuyen al rendimiento de la máquina. Este manual es un documento valioso. Lea el contenido con atención antes de utilizar la máquina o de realizar tareas de mantenimiento. Es importante que
  • Husqvarna Z554L | Owner Manual - Page 44
    una pieza de repuesto, hacer un reclamo de garantía o tiene si preguntas relacionadas con el servicio técnico, consulte con el siguiente profesional: Este manual pertenece a la máquina con el número de fabricación: Motor Transmisión Número de fabricación El número de fabricación de la máquina se
  • Husqvarna Z554L | Owner Manual - Page 45
    lector de un riesgo de daños personales o que puede causar la muerte, especialmente si el lector no sigue las instrucciones proporcionadas en el manual. INFORMACIÓN IMPORTANTE Xxxx xxxxxx xxxxx xxxx xxxxxxxxx xxxxxx xxxxxxxxx. Se usa en esta publicación para notificar al lector de un riesgo de da
  • Husqvarna Z554L | Owner Manual - Page 46
    objetos que puedan bloquear su visión e impedir que vea a un niño. Uso general • Lea, entienda y siga todas las instrucciones sobre la máquina en el manual antes de comenzar. • Se recomienda que alguien esté al tanto de que está usando la máquina y pueda prestar ayuda en caso de lesión o accidente
  • Husqvarna Z554L | Owner Manual - Page 47
    SEGURIDAD • No maneje la máquina si no tiene el recogedor de césped completo, la protección de descarga u otros dispositivos de seguridad en su lugar y en funcionamiento. • Desacelere antes de dar la vuelta. • No deje la máquina en funcionamiento sin vigilar. Siempre detenga las cuchillas, active el
  • Husqvarna Z554L | Owner Manual - Page 48
    SEGURIDAD • No corte el césped húmedo. Los neumáticos podrían perder tracción. • Evite arrancar, parar o girar en una pendiente. Si los neumáticos pierden tracción, desacople las cuchillas y avance lentamente y en línea recta bajando la pendiente. • Mantenga el desplazamiento lento y gradual en las
  • Husqvarna Z554L | Owner Manual - Page 49
    SEGURIDAD AVISO: Utilice gafas de protección para trabajos de mantenimiento. • Asegúrese de que el equipo esté en buen estado y que todas las tuercas y los pernos, sobre todo los que aseguran los accesorios de la cuchilla, estén correctamente apretados con el par de apriete adecuado. • Cuide el
  • Husqvarna Z554L | Owner Manual - Page 50
    de levantamiento, acoplamiento o anclaje. • No utilice la estructura ROPS para destrucción o remolque. • No exceda el peso bruto máximo del vehículo: 1,283 kg. • Lea el manual de instrucciones antes del uso. 50
  • Husqvarna Z554L | Owner Manual - Page 51
    SEGURIDAD • Sujete firmemente el cinturón de seguridad, si la unidad cuenta con una estructura de protección antivuelco ROPS. • Asegúrese de que el cinturón funcione correctamente y se pueda soltar con rapidez en caso de emergencia. • Mantenga la estructura ROPS plegable en la posición levantada y
  • Husqvarna Z554L | Owner Manual - Page 52
    CONTROLES CONTROLES Este manual del operador corresponde al cortacésped Zero Turn de Husqvarna. El cortacésped está equipado con un motor de válvula superior de cuatro tiempos. 7 La
  • Husqvarna Z554L | Owner Manual - Page 53
    CONTROLES Palancas de control de la dirección posiciones irregulares cuando está detenido o no encajan en las ranuras para mover los controles hacia afuera, pueden ajustarse. ADVERTENCIA: La máquina puede girar muy rápidamente si mueve un control de la dirección mucho más que el otro. Freno de
  • Husqvarna Z554L | Owner Manual - Page 54
    cinco veces con intervalos de un segundo. Para obtener información sobre el mantenimiento del motor y del cortacésped, consulte el Registro de servicio de este manual. Los indicadores de combustible de los depósitos de combustible se encuentran en los paneles de control izquierdo y derecho. 54
  • Husqvarna Z554L | Owner Manual - Page 55
    CONTROLES Altura de corte Palanca de ajuste del asiento Los pedales de altura de corte sueltan la elevación del equipo para que se pueda ajustar la altura del equipo deseada. Aplique presión al pedal de elevación y gire el pie para también aplicar presión al pedal de liberación, desbloqueando la
  • Husqvarna Z554L | Owner Manual - Page 56
    CONTROLES Desplazamiento Depósito de combustible Si el cortacésped no se mueve en línea recta, revise la presión de aire de los dos neumáticos traseros. La presión de aire recomendada para los neumáticos traseros es de 15 psi (1 bar). 1. Los ajustes de la rodadura se realizan mediante los pernos
  • Husqvarna Z554L | Owner Manual - Page 57
    OPERACIÓN OPERACIÓN Lea la sección Seguridad y las páginas siguientes si no está familiarizado con la máquina. Capacitación Debido a su exclusiva capacidad de dirección, los cortacésped de cero giro son mucho más maniobrables que los cortacéspedes típicos. Esta sección se debe analizar en su
  • Husqvarna Z554L | Owner Manual - Page 58
    OPERACIÓN Las condiciones siguientes deben cumplirse antes de arrancar el motor: • El interruptor de la cuchilla se debe presionar hacia abajo a la posición desacoplada. • El freno de estacionamiento debe estar hacia arriba, en la posición activada. • Ambos controles de dirección deben estar en la
  • Husqvarna Z554L | Owner Manual - Page 59
    OPERACIÓN la posición de transporte. Si el motor ha trabajado duro, déjelo funcionar en ralentí durante al menos 60 segundos para que alcance una temperatura normal de operación antes de detenerlo. Para no ensuciar las bujías de encendido, evite dejar el motor en ralentí durante períodos más largos.
  • Husqvarna Z554L | Owner Manual - Page 60
    : No haga ningún ajuste a menos que: • El motor esté parado. • La llave de contacto está quitada. • El freno de estacionamiento esté activado. Movimiento manual de la máquina Válvulas de derivación Las válvulas de derivación se utilizan para desconectar el sistema de forma que la máquina se pueda
  • Husqvarna Z554L | Owner Manual - Page 61
    siguiente es una lista de procedimientos de mantenimiento que se deben realizar en la máquina. Para los puntos que no se describen en este manual, visite un taller de servicio autorizado. Se recomienda enviar la máquina a revisión una vez al año en un taller de servicio autorizado para mantenerla
  • Husqvarna Z554L | Owner Manual - Page 62
    AL AÑO INTERVALO DE MANTENIMIENTO EN HORAS 50 250 500 ■ ● ● ● ♦ ■ ■ ■■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ● ● ● ● ♦ ♦ ♦ ● = Descrito en este manual ♦ = No se describe en este manual ■ = Consulte el manual del fabricante del motor 1) Primer cambio, después de 8 a 10 horas. Cuando se trabaja
  • Husqvarna Z554L | Owner Manual - Page 63
    MANTENIMIENTO Batería Si la batería está demasiado baja como para arrancar el motor, se debe recargar. Uso del cable de puente 1. Conecte cada extremo del cable rojo al terminal POSITIVO (+) de cada batería, teniendo cuidado de no hacer cortocircuito contra el chasis. 2. Conecte un extremo del
  • Husqvarna Z554L | Owner Manual - Page 64
    MANTENIMIENTO Sistema de seguridad La máquina está equipada con un sistema de seguridad que impide el arranque o la conducción en las condiciones siguientes. El motor solo puede arrancarse cuando: • el equipo de corte está desacoplado. • los controles de la dirección/freno de estacionamiento están
  • Husqvarna Z554L | Owner Manual - Page 65
    MANTENIMIENTO 7. Vuelva a colocar las protecciones de la correa en ambas carcasas de los mandriles y asegúrelas con los broches. Correa de la bomba Las correas no se pueden ajustar y deben reemplazarse si comienzan a patinar por el desgaste. Estacione la máquina en una superficie nivelada. Aplique
  • Husqvarna Z554L | Owner Manual - Page 66
    MANTENIMIENTO Ajuste del equipo de corte Nivelación del equipo Ajuste el equipo mientras el cortacésped esté en una superficie nivelada. Asegúrese de que los neumáticos estén inflados a la presión correcta. Consulte Presiones de los neumáticos en la sección Mantenimiento. Si los neumáticos tienen
  • Husqvarna Z554L | Owner Manual - Page 67
    MANTENIMIENTO 3. Para acceder a la articulación de la varilla de control, desenganche y gire el asiento hacia delante. 3. Para cambiar el funcionamiento del freno de estacionamiento, apriete el perno del pivote hasta que logre la sensación de frenado deseada. 4. Retire y guarde el pasador del
  • Husqvarna Z554L | Owner Manual - Page 68
    MANTENIMIENTO Ruedas de apoyo Las ruedas de apoyo mantienen el equipo en la posición correcta para ayudar a evitar el corte al ras en la mayoría de las condiciones del terreno. No ajuste las ruedas para soportar el equipo. INFORMACIÓN IMPORTANTE Ajuste las ruedas de apoyo con el cortacésped en una
  • Husqvarna Z554L | Owner Manual - Page 69
    LUBRICACIÓN LUBRICACIÓN Programa de lubricación 12/12 1/52 1/365 Cada año Cada semana Todos los días * Cambio de filtro y aceite hidráulico las primeras 100 horas, y en adelante, cada 400 horas. p Cambie el aceite del motor cada 50 horas. Lubricar con una pistola de engrase Cambiar filtro
  • Husqvarna Z554L | Owner Manual - Page 70
    LUBRICACIÓN Cambio de aceite del motor NOTA: Cambie el aceite del motor cuando el motor esté caliente. Consulte el manual del propietario del motor para ver las recomendaciones para realizar un cambio de aceite y de filtro adecuado. Engrasadores de rueda y equipo Utilice únicamente grasa para
  • Husqvarna Z554L | Owner Manual - Page 71
    LUBRICACIÓN ¡ADVERTENCIA! Drene los filtros de aceite usados de todo el aceite que fluya libremente antes de desecharlos. Coloque el aceite usado en contenedores adecuados y deséchelos de acuerdo con las leyes de su área. El siguiente procedimiento se puede realizar con la bomba instalada en el vehí
  • Husqvarna Z554L | Owner Manual - Page 72
    LUBRICACIÓN Compruebe el nivel de aceite y agregue más si fuera necesario después de parar el motor. 4. Es posible que sea necesario repetir los pasos 2 y 3 hasta purgar completamente todo el aire del sistema. si el mando hidráulico funciona con niveles de ruido normales y se mueve suavemente hacia
  • Husqvarna Z554L | Owner Manual - Page 73
    SOLUCIÓN DE PROBLEMAS SOLUCIÓN DE PROBLEMAS Problema / Causa El motor no arranca El interruptor de la cuchilla está activado Los controles de dirección no se bloquean en la posición del freno de estacionamiento Batería descargada Hay contaminación en el carburador o la tubería de combustible La vá
  • Husqvarna Z554L | Owner Manual - Page 74
    ALMACENAMIENTO ALMACENAMIENTO Almacenamiento durante el invierno La máquina debe prepararse para el almacenamiento al final de la temporada de corte o si se no se va a utilizar durante más de 30 días. El combustible que se deja en el depósito durante largos períodos de tiempo (30 días o más) puede
  • Husqvarna Z554L | Owner Manual - Page 75
    MG Key Switch Positions Position 2 - Run / Lights Position 3 - Run SBA S B A L Y MG L Y MG Position 4 - Start B S A L Y MG Engine Ground Blk Service Meter Blk Accessory Outlet Red / Blk T-3 Grn Blk / Yel T-1 Blk T-2 Purple Blk 20 AMP Red Seat Timer Module T-5 Wht Timer
  • Husqvarna Z554L | Owner Manual - Page 76
    DATA TÉCNICOS DATOS TÉCNICOS MOTOR Fabricante Tipo Electricidad Bujía Lubricación Combustible Capacidad del depósito de combustible Refrigeración Filtro de aire Alternador Motor de partida TRANSMISIÓN Transmisión Control de la dirección Velocidad de avance Velocidad de retroceso Frenos Neumáticos de
  • Husqvarna Z554L | Owner Manual - Page 77
    DATOS TÉCNICOS Especificaciones de par Perno del cigüeñal del motor 67 Nm Tornillos de polea de corte 203 Nm Tuercas del asa 102 Nm Par de apriete de la bujía 22 Nm Tornillo de la cuchilla 122 Nm Sujetadores estándar Sujetadores estándar Sujetadores estándar Sujetadores estándar
  • Husqvarna Z554L | Owner Manual - Page 78
    REGISTRO DE SERVICIO REGISTRO DE SERVICIO SERVICIO DE ENTREGA Acción Fecha, Lectura De Medidor, Sello, Firma Cargar y conecte la batería r Ajustar la presión de los neumáticos de todas las ruedas a 15 psi (1 bar) r Montar los controles de la dirección en la posición normal r Conectar la
  • Husqvarna Z554L | Owner Manual - Page 79
    REGISTRO DE SERVICIO DESPUÉS DE 10 HORAS Acción Cambiar el aceite del motor Cambiar el filtro de aceite Inspeccionar las mangueras hidráulicas Inspeccionar la correa hidráulica Inspeccionar el filtro hidráulico Comprobar la posición neutra Comprobar el sistema de seguridad Comprobar el cinturón de
  • Husqvarna Z554L | Owner Manual - Page 80
    REGISTRO DE SERVICIO SERVICIO DE 50 HORAS Acción Limpiar los residuos del cortacésped Revisar el nivel del aceite del motor Comprobar la presión de los neumáticos Revisar la parte inferior del equipo Inspeccionar las poleas del equipo Comprobar/limpiar la toma de aire de refrigeración del motor
  • Husqvarna Z554L | Owner Manual - Page 81
    REGISTRO DE SERVICIO SERVICIO DE 250 HORAS Acción Engrasar las conexiones (pivotes de las ruedecillas y ruedecillas) Inspeccionar los amortiguadores Inspeccionar el bastidor Inspeccionar los cables del acelerador y el estrangulador Inspeccionar la tornillería Comprobar la presión de los neumáticos
  • Husqvarna Z554L | Owner Manual - Page 82
    REGISTRO DE SERVICIO SERVICIO DE 500 HORAS Acción Engrasar las conexiones (pivotes de las ruedecillas y ruedecillas) Inspeccionar los amortiguadores Inspeccionar el bastidor Inspeccionar los cables del acelerador y el estrangulador Inspeccionar la tornillería Comprobar la presión de los neumáticos
  • Husqvarna Z554L | Owner Manual - Page 83
    REGISTRO DE SERVICIO AL MENOS UNA VEZ AL AÑO Acción Limpiar la toma de aire de refrigeración del motor Reemplazar el prefiltro del purificador de aire (espuma) Reemplazar el cartucho de papel del filtro de aire Cambiar el aceite del motor Reemplazar el filtro de aceite del motor Comprobar/ajustar la
  • Husqvarna Z554L | Owner Manual - Page 84
    2020-09-08
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84

Lea el manual de instrucciones detenidamente y
asegúrese
de comprender las instrucciones antes
de utilizar la máquina.
La gasolina que contiene hasta 10 % de etanol
(E10) se puede usar en esta máquina. El uso de
gasolina que tenga más de 10 % de etanol (E10)
anulará la garantía del producto.
114 24 91-27
Operator Manual
Manual del operador
Z554L / 97050500100
Please read the operator manual carefully and make
sure you understand the instructions
before using the machine.
Gasoline containing a maximum of 10% ethanol
(E10) is permitted for use in this machine. The use of
gasoline with more than 10% ethanol (E10)
will void
the product warranty.
English / Spanish