Husqvarna Z554L Owner Manual - Page 27

LUBRICATION L U B R I C AT I O N Lubrication Schedule 12/12 1/52 1/365 Every year Every Week Every day * Initial hydraulic oil and filter change at 100 hrs, every 400 hrs thereafter. p Change engine oil every 50 hours. Lubricate with grease gun Filter change Oil change Level check General Remove the ignition key to prevent accidental movements during lubrication. When lubricating with an oil can, it must be filled with engine oil. When lubricating with grease, unless otherwise stated, use high grade molybdenum disulphide grease. For daily use, the machine must be lubricated twice weekly. Wipe away excess grease after lubrication It is important to avoid getting lubricant on the belts or the drive surfaces on the belt pulleys. If this happens, clean them with spirits. If the belt continues to slip after cleaning, it must be replaced. Gasoline or other petroleum products must not be used to clean belts. WARNING! Escaping hydraulic oil under pressure can have sufficient force to penetrate the skin, causing serious injury. If injured by escaping fluid, see a doctor at once. Serious infection or reaction can develop if proper medical treatment is not administered immediately. IMPORTANT INFORMATION Use minimal lubrication and remove excess lubricant so that is does not come into contact with belts or belt pulley drive surfaces. 27