IBM 887022X User Manual - Page 51
Remote, Supervisor, Adapters, Identifying, Adapter
UPC - 000435151957
View all IBM 887022X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Remote Supervisor Adapters This section describes how to identify the Remote Supervisor Adapter by its features and prerequisites for setup. It also explains how to cable and configure a Remote Supervisor Adapter or Remote Supervisor Adapter II-EXA for use on an Advanced System Management (ASM) network so that you can manage the server from a remote location. For more detailed information, see the appropriate Remote Supervisor Adapter User's Guide on the IBM xSeries Documentation CD. Identifying the Remote Supervisor Adapter Your server comes with either a Remote Supervisor Adapter or a Remote Supervisor Adapter II-EXA installed. Before you can configure and use your Remote Supervisor Adapter, you must identify which Remote Supervisor Adapter is installed. The easiest way to identify the Remote Supervisor Adapter installed in your server is visually. External power connector Heartbeat LED (amber) RSA II - EXA breakout port Ethernet activity LED (green) Ethernet link LED (green) Power LED (green) Video port 10/100 Ethernet port Figure 13. Remote Supervisor Adapter II-EXA connectors and LEDs External power Error LED ASM interconnect connector (amber) port Ethernet activity LED (green) Ethernet link LED (green) Power LED (green) Management port 10/100 Ethernet port Figure 14. Remote Supervisor Adapter connectors and LEDs Use Figure 13 and Figure 14 to identify the type of Remote Supervisor Adapter installed in the server. After identifying the adapter, see "Setting up the Remote Supervisor Adapter II-EXA" on page 40 or "Setting up the Remote Supervisor Adapter" on page 52. Chapter 2. Configuring the server 39