IBM 887022X User Manual - Page 68
Setting, Enabled, Configuration, Settings
UPC - 000435151957
View all IBM 887022X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Note: For detailed information about using the ASM Web interface and the text-based user interface, see the Remote Supervisor Adapter User's Guide on the IBM xSeries Documentation CD. Table 3. Configuration tasks to enable remote access to the Remote Supervisor Adapter User interface to Remote Connection to Remote Supervisor Adapter Supervisor Adapter For the configuration procedure, see: ASM Web interface using HTTP Text-based user interface using the Telnet protocol LAN using the Ethernet port "Configuring the Ethernet settings for Web-based remote access" Text-based user interface using a modem or a null modem ASM Web interface using point-to-point protocol (PPP) Management (COM) port "Configuring the management port for text-based remote access" on page 58 and "Setting up point-to-point protocol" on page 59 Text-based user interface using the Telnet protocol over PPP Configuring the Ethernet settings for Web-based remote access: If you have an accessible, active, and configured dynamic host configuration protocol (DHCP) server on the network, the hostname, IP address, gateway address, subnet mask, and DNS server IP address are set automatically. You do not need to perform further configuration tasks to enable the Ethernet connection because the default value for the DHCP Setting field is Enabled. If you need to configure the management port, go to "Configuring the management port for text-based remote access" on page 58; otherwise, go to "Installing Advanced System Management device drivers" on page 61. If you do not have a DHCP server on the network, complete the following steps to configure the Ethernet settings. 1. With the server turned off, insert the diskette with the downloaded utility program into the diskette drive; then, turn on the server. The utility starts automatically, displaying the Remote Supervisor Utility window. 2. Use the arrow keys to select Configuration Settings; then, press Enter. The Configuration Settings window opens. 56 xSeries 445 Type 8870: User's Guide