Icom IC-7850 Instruction Manual - Page 128

Previous view 6 SCOPE OPERATION Waveform Type (Default: Fill) Select the outline waveform display for the Spectrum scope. • Fill: The waveform is drawn only in color. • Fill + Line: T he waveform is drawn in color with an outline. Waveform Color (Current) (Default: (R) 217 (G) 241 (B) 247) Set the waveform outline color for the currently received signals. • The color is set in the RGB format. • Push [t u](F) to select R (Red), G (Green) and B (Blue). Rotate [MAIN DIAL] to adjust the ratio from 0 to 255. • The color is displayed in the box beside the RGB scale. Waveform Color (Line) (Default: (R) 70 (G) 30 (B) 0) Set the waveform outline color for the currently received signals. • The color is set in the RGB format. • Push [t u](F) to select R (Red), G (Green) and B (Blue). Rotate [MAIN DIAL] to adjust the ratio from 0 to 255. • The color is displayed in the box beside the RGB scale. Waveform Color (Max Hold) (Default: (R) 58 (G) 110 (B) 147) Set the waveform color for the received signals maximum level. • The color is set in the RGB format. • Push [t u](F) to select R (Red), G (Green) and B (Blue). Rotate [MAIN DIAL] to adjust the ratio from 0 to 255. • The color is displayed in the box beside the RGB scale. Waterfall Display (Default: ON) Turn the Water fall display ON or OFF for the normal scope or Mini scope screen. (In the Expanded scope screen, the Waterfall is always displayed.) • OFF: Turns OFF the Waterfall display. • ON: Turns ON the Waterfall display. Waterfall Speed (Default: MID) Select the Waterfall speed. • SLOW: Sets the waterfall speed to SLOW. • MID: Sets the waterfall speed to MID. • FAST: Sets the waterfall speed to FAST. Waterfall Size (Expand Scope) (Default: Mid) Select the Waterfall height in the Expand scope screen. • Small: The same height with the normal scope screen, only the FFT scope expands. • Mid: The Waterfall height expands same ratio with the FFT scope. • Large: Only the Waterfall height expands. Waterfall Peak Color Level (Default: Grid 10) Select the signal level that the Waterfall displays a peak color. Higher signal levels are Red, Yellow, Green, Light-blue, Blue and Black in order. • Selection: Grid 1 ~ Grid 10 Dual Scope Type (Default: Over/Under) When the Dual scope is selected, select the Main and Sub scope layout. • Over/Under: Displays the Main scope over the Sub scope. • Side by Side: D isplays the Main and Sub scopes side by side. Dual Scope Auto Select (Default: ON) When the Dual scope is selected, the band selection keys, [MAIN] and [SUB] simultaneously select the Main or Sub scope. • OFF: Push [M/S DUAL](F) or click the mouse button to select the Main or Sub scope. • ON: Push [M/S DUAL](F) or click the mouse button to select the Main or Sub scope. In addition, push the [MAIN] or [SUB] key to select the operating band, and automatically select the Main or Sub scope. 6-11