Icom IC-7850 Instruction Manual - Page 190
Scan set mode, SCAN Speed, SCAN Resume
View all Icom IC-7850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
Previous view 12 SCANS ■■Scan set mode When the squelch is open, the scan continues until it is manually stopped - it does not pause on detected signals. When the squelch is closed, the scan stops when a signal is detected, then resumes according to the Scan Resume setting. The scan speed and the Scan Resume setting can be set in the Scan set mode. The Multi-function screens are OFF. qqPush [SCAN](F). • The Scan screen is displayed. wwPush [SET](F). • The Scan set screen is displayed. eePush [p](F) or [q](F) to select the desired item. rrRotate [MAIN DIAL] to select the desired setting. • Hold down [DEF](F) for 1 second to select the default setting. ttPush [EXIT/SET]. Exits the Set screen. (F) Function keys [EXIT/SET] [MAIN DIAL] SCAN Speed (Default: HIGH) Set the desired scan speed to high or low. • HIGH: Scan is faster • LOW: Scan is slower. SCAN Resume (Default: ON) Set the scan resume function to ON or OFF. • ON: When a signal is detected, scan pauses for 10 seconds, then resumes. Two seconds after the signal disappears, the scan resumes. • OFF: When detecting a signal, cancels scanning. 12-4