Icom IC-A25C Full Manual - Page 15

Selecting the 121.5 MHz, emergency frequency, Selecting the Recall channels

Page 15 highlights

4 BASIC OPERATION Selecting the 121.5 MHz emergency frequency In case of emergency, you can immediately select the 121.5 MHz emergency frequency. zzPush [F], and then push [121.5] to select the emergency frequency. LLPush [CLR] to return to the previously selected frequency. Selecting the Recall channels The transceiver stores the previously selected frequencies in the "Recall CH." You can easily select them without rotating [DIAL] or accessing memory. 1. Push the Directional key to display the "Recall CH" screen. 2. Select the channel. ••The selected channel will be set in 3 seconds. LLIt is not necessary to push [ENT] to select the channel. LLPush [CLR] to return to the previously selected frequency. 4-3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53

4
BASIC OPERATION
4-3
Selecting the 121.5 MHz
emergency frequency
In case of emergency, you can immediately select the
121.5 MHz emergency frequency.
z
Push [F], and then push [121.5] to select the
emergency frequency.
L
Push [CLR] to return to the previously selected
frequency.
Selecting the Recall channels
The transceiver stores the previously selected
frequencies in the “Recall CH.” You can easily select
them without rotating [DIAL] or accessing memory.
1.
Push the Directional key to display the “Recall
CH” screen.
2. Select the channel.
• The selected channel will be set in 3 seconds.
L
It is not necessary to push [ENT] to select the
channel.
L
Push [CLR] to return to the previously selected
frequency.