Icom IC-A25C Full Manual - Page 22

Flying following

Get Icom IC-A25C PDF manuals and user guides View all Icom IC-A25C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

6 WAYPOINT NAVIGATION Selecting a waypoint (Continued) Flying following a flight plan DDSelecting a waypoint near your position 1. Push [F], and then push [ ] to display the "DirectTo WPT" screen. 2. Select "Near Waypoint," and then push [ENT]. ••The transceiver searches for waypoints. ••The "Near Waypoint" screen is displayed, if waypoints are found. 3. Select a waypoint, and then push [ENT]. ••The "Course To" screen is displayed.* 4. Enter the course, and then push [ENT].* ••The Waypoint Navigation screen is displayed. The transceiver assists you to navigate following a selected flight plan. DDSelecting a flight plan 1. Open the "Select FPL" screen. ([MENU] > WPT Navigation > FPL Navigate > Select FPL) ••Flight plans are displayed. DDSetting a waypoint manually 1. Push [F], and then push [ ] to display the "DirectTo WPT" screen. 2. Select "Manual Entry," and then push [ENT]. ••The "Latitude" screen is displayed. 3. Enter the latitude, and then push [ENT]. ••The "Longitude" screen is displayed. 4. Enter the longitude, and then push [ENT]. ••The "Magnetic Vari" screen is displayed. 5. Enter the magnetic variation, and then push [ENT]. ••The "Course To" screen is displayed.* 6. Enter the course, and then push [ENT].* ••The Waypoint Navigation screen is displayed. 2. Select a flight plan, and then push [ENT]. •• Waypoints contained in the flight plan are displayed. DDSelecting a waypoint from history 1. Push [F], and then push [ ] to display the "DirectTo WPT" screen. 2. Select "History," and then push [ENT]. ••The "History" screen is displayed. 3. Select a waypoint, and then push [ENT]. ••The "Course To" screen is displayed.* 4. Enter the course, and then push [ENT].* ••The Waypoint Navigation screen is displayed. *The course entry is required only when the CDI type Navigation screen is selected. 3. Select a waypoint, and then push [ENT] to display the Waypoint Navigation screen. The transceiver starts to navigate to the next waypoint. 4. Fly to the waypoint by checking the direction using the Waypoint Navigation screen. NOTE: When you come about 0.5 nm closer to the waypoint, the transceiver automatically starts navigating to the next waypoint. LLThe function works only on the Nomal type Waypoint Navigation screen. LLYou can turn OFF the function on the Menu screen. ([MENU] > WPT Navigation > Settings > Auto Change) When the function is OFF, push [F], and then push [FPL] to display the waypoints contained in the flight plan, and then select the next waypoint. DDReversing a flight plan You can reverse the selected flight plan, to follow it back to the starting waypoint. zzAfter selecting a flight plan, select "Reverse Route," and then push [ENT]. ••The transceiver starts to navigate to the next waypoint. 6-3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
6
WAYPOINT NAVIGATION
6-3
Flying following a
flight plan
The transceiver assists you to navigate following a
selected flight plan.
D
Selecting a flight plan
1.
Open the “Select FPL” screen.
([MENU] > WPT Navigation > FPL Navigate >
Select FPL
)
• Flight plans are displayed.
2.
Select a flight plan, and then push [ENT].
•
Waypoints contained in the flight plan are displayed.
3.
Select a waypoint, and then push [ENT] to display
the Waypoint Navigation screen. The transceiver
starts to navigate to the next waypoint.
4.
Fly to the waypoint by checking the direction using
the
Waypoint Navigation screen.
D
Reversing a flight plan
You can reverse the selected flight plan, to follow it
back to the starting waypoint.
z
After selecting a flight plan, select “Reverse Route,”
and then push [ENT].
• The transceiver starts to navigate to the next waypoint.
NOTE:
When you come about 0.5 nm closer to the
waypoint, the transceiver automatically starts
navigating to the next waypoint.
L
The function works only on the Nomal type Waypoint
Navigation screen.
L
You can turn OFF the function on the Menu screen.
([MENU] > WPT Navigation > Settings >
Auto Change
)
When the function is OFF, push [F], and then push
[FPL] to display the waypoints contained in the flight
plan, and then select the next waypoint.
Selecting a waypoint (Continued)
D
Selecting a waypoint near your position
1.
Push [F], and then push [
] to display the “Direct-
To WPT” screen.
2.
Select “Near Waypoint,” and then push [ENT].
• The transceiver searches for waypoints.
• The “Near Waypoint” screen is displayed, if waypoints
are found.
3.
Select a waypoint, and then push [ENT].
• The “Course To” screen is displayed.*
4.
Enter the course, and then push [ENT].*
• The Waypoint Navigation screen is displayed.
D
Setting a waypoint manually
1.
Push [F], and then push [
] to display the “Direct-
To WPT” screen.
2.
Select “Manual Entry,” and then push [ENT].
• The “Latitude” screen is displayed.
3.
Enter the latitude, and then push [ENT].
• The “Longitude” screen is displayed.
4.
Enter the longitude, and then push [ENT].
• The “Magnetic Vari” screen is displayed.
5.
Enter the magnetic variation, and then push
[ENT].
• The “Course To” screen is displayed.*
6.
Enter the course, and then push [ENT].*
• The Waypoint Navigation screen is displayed.
D
Selecting a waypoint from history
1.
Push [F], and then push [
] to display the “Direct-
To WPT” screen.
2.
Select “History,” and then push [ENT].
• The “History” screen is displayed.
3.
Select a waypoint, and then push [ENT].
• The “Course To” screen is displayed.*
4.
Enter the course, and then push [ENT].*
• The Waypoint Navigation screen is displayed.
*The course entry is required only when the CDI type
Navigation screen is selected.