Icom IC-A25C Full Manual - Page 21
Waypoint Navigation screen, Selecting a waypoint
View all Icom IC-A25C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
6 WAYPOINT NAVIGATION The transceiver assists you to navigate to a selected destination, or follow your flight plan. LLThe function works only when the transceiver's GPS receiver is receiving valid GPS signals. NOTE: IC-A25N and IC-A25NE's Waypoint Navigation features are supplemental aids to navigation only, and are not intended to be a substitute for primary Waypoint Navigation equipment. Waypoint Navigation screen The transceiver has 2 types of Waypoint Navigation screens, as shown below. You can change the screen type on the "Navigation Style" screen. ([MENU] > WPT Navigation > Settings > Navigation Style). Normal type CDI type Icon area HEADING INDICATOR (For only the Normal screen) Displays your heading. DESTINATION ICON (For only the Normal screen) Displays the destination. Selecting a waypoint The transceiver assists you to navigate to a selected waypoint. Select a waypoint to use as a destination, as shown below. Navigation area DDIcon Area See page 2-3 for details. DDNavigation Area WAYPOINT NAME INDICATOR Displays the waypoint name. LL" " is displayed, when a waypoint is selected from a flight plan. LL" " is displayed, when the waypoint is manually selected. ETE INDICATOR Displays the Estimated Time Enroute (ETE). SOG INDICATOR Displays the Speed Over Ground (SOG). DISTANCE INDICATOR Displays the distance to the destination. RANGE INDICATOR (For only the Normal screen) Displays the display range. GPS ICON ••Displayed when valid position data is received. ••Blinks while searching for satellites or calculating position data. DDSelecting a waypoint from the memory 1. Push [F], and then push [ ] to display the "DirectTo WPT" screen. 2. Select "Select Memory," and then push [ENT]. ••The "Group List" screen is displayed. 3. Select a group, and then push [ENT]. ••Waypoints saved in the selected group are listed. 4. Select a waypoint, and then push [ENT]. ••The "Course To" screen is displayed.* 5. Enter the course, and then push [ENT].* ••The Waypoint Navigation screen is displayed. DDSelecting a waypoint from a flight plan 1. Push [F], and then push [ ] to display the "DirectTo WPT" screen. 2. Select "Flight Plan," and then push [ENT]. ••The "Flight Plan" screen is displayed. 3. Select a flight plan, and then push [ENT]. ••Waypoints included in the selected flight plan are displayed. 4. Select a waypoint, and then push [ENT]. ••The "Course To" screen is displayed.* 5. Enter the course, and then push [ENT].* ••The Waypoint Navigation screen is displayed. *The course entry is required only when the CDI type Navigation screen is selected. 6-2