Icom IC-A6 Instruction Manual - Page 22
Weather channel scan, channel setting
View all Icom IC-A6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
5 SCAN OPERATION I Weather channel scan (U.S.A. version only) q Push , then push [ENT•WX] to select a weather channel. w Set squelch to the point where noise is just muted. e Push , then push [ANL•SCAN] to start the scan. • When a signal is received, the scan pauses until it disappears. • To change the scanning direction, rotate [DIAL]. r To stop the scan, push [CLR•DEL]. I "TAG" channel setting Memory and weather channels* can be specified to be skipped for the memory and weather channel* scans respectively. The "TAG" channel function is only available during scan operation. Push then Appears the "TAG" indicator. Memory channel 15 is scanned during memory scan. Memory channel 15 is skipped during scan. q Push [MR•MW] to select memory mode; or, push , then push [ENT•WX] to select a weather channel.* w Select the desired memory channel to be a "TAG" channel. e Push , then push [9•TAG] to set a "TAG." • "TAG" appears. • Non-"TAG" channels are skipped during scan. r To cancel the "TAG" setting, repeat above steps. *Weather channel: U.S.A. version only. 17