Icom ID-52A D-star Using The Gps Logger Function - Page 7

6. Q&A (GPS Logger mode) GPS signal cannot be received When "GPS Select" is set to "Manual," change it to "Internal GPS" or "ON," depending on the transceiver. When "External GPS" is selected, confirm the connection with the external GPS is successful. LLReceiving a signal may take time, depending on the operating environment. LLWhen the transceiver is used indoors, signals from GPS satellites may not be received, depending on where the transceiver is installed, or the building's surrounding environment. What is the recording interval? The recording interval of the GPS Logger function depends on the transceiver you are using. When traveling on trains or cars, the recording interval should be shortened. When traveling on foot, such as when climbing mountains, the recording interval should be set longer. If the recorded log information is too detailed, set a longer recording interval. If the log information is too coarse, set a shorter recording interval. When altitude information is not recorded? Check that the GGA for which altitude information can be obtained is set as a sentence to be recorded. LLThe altitude information can be obtained when receiving 4 or more satellites. LLThe more satellites the transceiver is receiving, the more accurate the altitude information will be. What models are equipped with the GPS Logger Only mode? The ID-31A/E and ID-51A/E series, the ID-52A/E, and the IC-R30 are supported. 7