Image Fitness Renew 400 Canadian English Manual - Page 16

DRAINING THE PUMP After the hydrotherapy spa is drained (see DRAINING THE HYDROTHERAPY SPA on page 15), the pump should also be drained if the hydro-therapy spa will be stored for more than thirty days, or if it may be exposed to freezing temperatures. To drain the pump, remove the access cover from the spa unit (see ATTACHING AND REMOVING THE ACCESS COVER on page 15). Pump Locate the pump inside the spa unit. Drain Plug Remove the drain plug from the pump and allow all water to drain from the pump. Replace the drain plug. WINTER USE AND CARE The hydrotherapy spa is designed for year-round use. If you decide to store the hydrotherapy spa for the winter, store it in a warm, dry location. Follow the steps below to winterize the hydrotherapy spa. 1. Drain the spa (see DRAINING THE HYDROTHERAPY SPA on the previous page). 2. Remove all remaining water from the spa shell. Dry the spa shell with towels. 3. Set the air control on the console to the lowest setting. Use a wet/dry vacuum to pull any remaining water from the system. To do this, place the vacuum nozzle over each jet, starting with the highest jet and finishing with the lowest one. 4. Set the air control on the console to the highest setting and repeat step 3. 5. Drain the pump (see DRAINING THE PUMP on this page). Once the water has drained from the pump, place the vacuum nozzle over the drainage hole in the pump and vacuum any additional water from the pump. Note: For additional protection you can remove the pump/motor from the spa to store it in a climate-controlled room. 6. Clean the spa shell (see page 13). 7. Clean the filter (see page 14). 8. Re-attach the access cover and re-attach the spa cover. 16