Insignia NS-32D200NA14 User Manual (English)
Insignia NS-32D200NA14 Manual
 |
View all Insignia NS-32D200NA14 manuals
Add to My Manuals
Save this manual to your list of manuals |
Insignia NS-32D200NA14 manual content summary:
- Insignia NS-32D200NA14 | User Manual (English) - Page 1
User Guide 32" LED TV NS-32D200NA14 Before using your new product, please read these instructions to prevent any damage. - Insignia NS-32D200NA14 | User Manual (English) - Page 2
1 Important Safety Instructions 2 WARNING 2 CAUTION 3 Introduction 4 MHL 4 INlink 4 DTS Sound 4 Installing the stand or wall-mount bracket 5 Installing the stand 5 Installing a wall-mount bracket 6 TV components 8 Package contents 8 Front 8 Side 8 Back 9 Remote control 10 What - Insignia NS-32D200NA14 | User Manual (English) - Page 3
32 Connecting a home theater system with multiple devices 33 Connecting power 34 Using the remote control 35 Installing remote control batteries 35 Aiming the remote control 35 Turning on your TV picture 40 Adjusting the TV picture 40 Aspect ratio options 41 Setting the power on picture mode - Insignia NS-32D200NA14 | User Manual (English) - Page 4
photos in a slideshow 66 Customizing slideshow settings 67 Maintaining 67 Cleaning the TV cabinet 67 Cleaning the TV screen 67 Troubleshooting 68 Restoring settings to the defaults 68 Viewing system information 68 Video and audio 68 Remote control 71 General 71 MHL-enabled device - Insignia NS-32D200NA14 | User Manual (English) - Page 5
of wall mount does not fit all. Use only a wall mount rated for the weight of your TV and that has been recommended by this TV manufacturer, listed in this manual, or otherwise listed by an independent laboratory as suitable for your TV. • Follow all instructions supplied by the TV and wall mount - Insignia NS-32D200NA14 | User Manual (English) - Page 6
NS-32D200NA14 Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your TV. This label is located on the back of your TV. This symbol indicates that there are important operating - Insignia NS-32D200NA14 | User Manual (English) - Page 7
than that contained in the operating instructions unless you are qualified to do so. CAUTION Damage requiring service Unplug this TV from the power outlet and refer servicing to qualified service personnel under the following conditions: • When the power supply cord or plug is damaged or frayed - Insignia NS-32D200NA14 | User Manual (English) - Page 8
NS-32D200NA14 Insignia 32" LED TV Insignia 32" LED TV Introduction Congratulations on your purchase of a high-quality Insignia product. Your NS-32D200NA14 represents the state of the art in LED TV design and is designed for reliable and trouble-free performance. MHL™ Connect your MHL-enabled device - Insignia NS-32D200NA14 | User Manual (English) - Page 9
Insignia 32" LED TV Installing the stand or wall-mount bracket Notes • If you plan to wall-mount your TV, do not install the stand. • Store the stand and stand screws in case you decide to use the stand in the future. Installing the stand To install the stand: 1 Carefully place your TV face-down on - Insignia NS-32D200NA14 | User Manual (English) - Page 10
NS-32D200NA14 Insignia 32" LED TV Installing a wall-mount bracket Warning This TV is intended to be supported by a UL Listed wall mount bracket with suitable weight/load. (See "Miscellaneous" on page 75.) To attach your TV to a wall-mount bracket: 1 Carefully place your TV face-down on a cushioned, - Insignia NS-32D200NA14 | User Manual (English) - Page 11
Insignia 32" LED TV 3 Attach the wall-mount bracket to your TV using the mounting holes on the back of your TV. See the instructions that came with the wall-mount bracket for information about how to correctly hang your TV. Notes • The length of the wall-mount screws vary depending on the wall-mount - Insignia NS-32D200NA14 | User Manual (English) - Page 12
32" LED TV • Remote control and batteries (2 AAA) • TV stand and screws (3) • Power cord • Quick Setup Guide • Important Information Front Side NS-32D200NA14 Insignia 32" LED TV # Item Remote control 1 sensor and Power indicator 2 MENU 3 INPUT 4 VOL+/VOL- 5 CH /CH 6 POWER Description The remote - Insignia NS-32D200NA14 | User Manual (English) - Page 13
Insignia 32" LED TV Back # Item Description 1 Plug the power cord into this Power connector connector. Connect the audio amplifier or home theater system to this 4 DIGITAL OUTPUT jack to listen to TV audio through (coaxial) the amplifier speakers. For more information, see "Using digital - Insignia NS-32D200NA14 | User Manual (English) - Page 14
90, 120, 180, or 240 minutes. For more information, see "Setting the sleep timer" on page 57. 21 PICTURE 22 AUDIO NS-32D200NA14 Insignia 32" LED TV Description Press to open the Favorite channel list. For more information, see "Setting up a favorite channel list" on page 47 and "Viewing a favorite - Insignia NS-32D200NA14 | User Manual (English) - Page 15
in image or color problems. Make sure that all connections are tight and secure. • The external audio/video equipment shown may be different from your equipment. If you have questions, refer to the documentation that came with your equipment. • Always unplug the power cord when connecting external - Insignia NS-32D200NA14 | User Manual (English) - Page 16
NS-32D200NA14 Insignia 32" LED TV Connecting a cable or satellite box Many cable or satellite TV boxes have more than HDMI: 1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on - Insignia NS-32D200NA14 | User Manual (English) - Page 17
VGA/DVI AUDIO IN jack 3.5mm audio cable Back of TV To connect a cable or satellite box using DVI: 1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite - Insignia NS-32D200NA14 | User Manual (English) - Page 18
NS-32D200NA14 Insignia 32" LED TV Using component video (better) Note Cables are often color-coded to match color-coded jacks. On your TV Cable or satellite box Component Analog video cable audio cable connectors connector Component Analog video jacks audio jacks Audio cable Component video - Insignia NS-32D200NA14 | User Manual (English) - Page 19
To connect a cable or satellite box using composite video: 1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect an AV cable (not provided) to - Insignia NS-32D200NA14 | User Manual (English) - Page 20
NS-32D200NA14 Insignia 32" LED TV Cable or satellite box ANT/CABLE IN jack Back of TV Coaxial cable To connect a cable or satellite box using coaxial: 1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall - Insignia NS-32D200NA14 | User Manual (English) - Page 21
cable with the power cord or other cables. • If the antenna is not installed correctly, contact qualified service personnel to correct the problem. • If the signal level for a channel is weak, the picture may be distorted. Adjust the antenna or use a highly directional outdoor or set-top antenna - Insignia NS-32D200NA14 | User Manual (English) - Page 22
NS-32D200NA14 Insignia 32" LED TV Connecting a DVD or Blu-ray player Many DVD or OUT jack on the DVD or Blu-ray player. 3 Plug your TV's power cord into a power outlet, then turn on your TV. 4 Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the - Insignia NS-32D200NA14 | User Manual (English) - Page 23
you connect the audio using the VGA/DVI AUDIO IN jack, the audio output is analog. 5 Plug your TV's power cord into a power outlet, then turn on your TV. 6 Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the documentation that came with the player - Insignia NS-32D200NA14 | User Manual (English) - Page 24
NS-32D200NA14 Insignia 32" LED TV Using component video (better) Note Cables are often color-coded to match color-coded jacks. On your TV is analog. 4 Plug your TV's power cord into a power outlet, then turn on your TV. 5 Turn on the DVD or Blu-ray player, then set it to the correct output mode - Insignia NS-32D200NA14 | User Manual (English) - Page 25
you connect the audio using the L and R audio jacks, the audio output is analog. 3 Plug your TV's power cord into a power outlet, then turn on your TV. 4 Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the documentation that came with the player - Insignia NS-32D200NA14 | User Manual (English) - Page 26
NS-32D200NA14 Insignia 32" LED TV Connecting an MHL-enabled device You can connect an MHL-enabled device, such as a cell phone or Roku Streaming Stick™, and view your device's screen on your TV. Tip The following task shows how to connect an MHL-enabled device using a standard HDMI cable and an - Insignia NS-32D200NA14 | User Manual (English) - Page 27
Insignia 32" LED TV Connecting a game console Using HDMI (best) On your TV Side of TV HDMI cable connector HDMI jack Game console HDMI cable To connect a game console using HDMI: 1 Make sure that your TV's power cord is unplugged and the game console is turned off. 2 Connect an HDMI cable (not - Insignia NS-32D200NA14 | User Manual (English) - Page 28
NS-32D200NA14 Insignia 32" LED TV Using component video (better) Note Cables are often color-coded to match color-coded jacks. On your TV output is analog. 3 Plug your TV's power cord into a power outlet, then turn on your TV. 4 Turn on the game console, then set it to the correct output mode. For - Insignia NS-32D200NA14 | User Manual (English) - Page 29
). • When you connect the audio using the L and R audio jacks, the audio output is analog. 3 Plug your TV's power cord into a power outlet, then turn on your TV. 4 Turn on the game console, then set it to the correct output mode. For more information, see the documentation that came with the console - Insignia NS-32D200NA14 | User Manual (English) - Page 30
your TV NS-32D200NA14 Insignia 32" LED TV VGA cable connector Audio cable with stereo mini plug Audio cable with stereo mini plug VGA jack VGA/DVI AUDIO IN jack VGA cable Back of TV To connect a computer using VGA: 1 Make sure that your TV's power cord is unplugged and the computer is turned - Insignia NS-32D200NA14 | User Manual (English) - Page 31
Insignia 32" LED TV Using HDMI (best) On your TV HDMI cable connector HDMI jack Side of TV HDMI cable To connect a computer using HDMI: 1 Make sure that your TV's power cord is unplugged and the computer is turned off. 2 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of - Insignia NS-32D200NA14 | User Manual (English) - Page 32
NS-32D200NA14 Insignia 32" LED TV Using DVI (same as HDMI but requires an audio connection) Note You must use the HDMI1/ARC/DVI jack to connect a computer using DVI. If you use another HDMI jack, you will not hear sound from the TV speakers. On your TV Side of TV HDMI cable Audio cable connector - Insignia NS-32D200NA14 | User Manual (English) - Page 33
Insignia 32" LED TV Connecting a USB flash drive Side of TV USB flash drive To connect a USB flash drive: 1 Plug a USB flash drive into the USB port on the side of your TV. Caution Do not remove the USB flash drive or turn off the TV while using the USB flash drive. You may lose data or damage the - Insignia NS-32D200NA14 | User Manual (English) - Page 34
NS-32D200NA14 Insignia 32" LED TV Connecting headphones When you connect headphones, the TV speakers muted. Warning Loud noise can damage your hearing. When using headphones, use the lowest volume setting on your headphones that still lets you hear the sound. Side of TV To connect headphones: 1 - Insignia NS-32D200NA14 | User Manual (English) - Page 35
Connect a digital coaxial audio cable (not provided) to the DIGITAL OUTPUT jack on the back of your TV and to the coaxial AUDIO IN jack on the digital home theater system. 3 Plug your TV's power cord into a power outlet, then turn on your TV and the home theater system. www.insigniaproducts.com 31 - Insignia NS-32D200NA14 | User Manual (English) - Page 36
NS-32D200NA14 Insignia 32" LED TV Using analog audio When you connect a home theater system to the On your TV /AUDIO OUT jack, the TV speakers are muted. Side of TV 3.5mm audio cable connector Home theater system /AUDIO OUT jack 3.5mm audio cable To connect a home theater system using analog - Insignia NS-32D200NA14 | User Manual (English) - Page 37
Insignia 32" LED TV Connecting a home theater system with multiple devices DVD or Blu-ray player Cable or satellite box AV receiver Game console USB flash drive Computer Antenna or cable TV connected directly to the wall jack The connections you make depend on the video and audio jacks - Insignia NS-32D200NA14 | User Manual (English) - Page 38
Connecting power NS-32D200NA14 Insignia 32" LED TV To connect the power: 1 Connect the AC power cord to the AC IN connector on the back of your TV. 2 Connect the other end of the cord to a power outlet. Caution • Your TV should only be operated from the power source indicated on the label. • - Insignia NS-32D200NA14 | User Manual (English) - Page 39
Insignia 32" LED TV Using the remote control Installing remote control batteries To install remote control batteries: 1 While pressing the release latch on the back of the remote control, lift the battery compartment cover off the remote control. 2 Insert two AAA batteries into the battery - Insignia NS-32D200NA14 | User Manual (English) - Page 40
through 17 for details.) • Connected the power cord. (See page 34 for details.) 2 Press (power) to turn on your TV. The Choose your Menu Language screen opens. NS-32D200NA14 Insignia 32" LED TV 6 Press S or T to highlight Time Zone, then press X to access the setting. 7 Press S or T to select your - Insignia NS-32D200NA14 | User Manual (English) - Page 41
Insignia 32" LED TV 13 Press S or T to highlight Antenna, Cable, or Satellite Box, then press ENTER. A If you select Antenna, your TV scans for . • Select No, then press ENTER if no cable box is connected. Your TV scans for available channels. The scan may take several minutes. • Select Yes, then - Insignia NS-32D200NA14 | User Manual (English) - Page 42
NS-32D200NA14 Insignia 32" LED TV C If you select Satellite Box, a message asks how you connected the satellite box to your TV: • Select HDMI, Component, or AV, then press ENTER if you connected a satellite box to your TV using one of these cables. Read the message, then press ENTER to close the - Insignia NS-32D200NA14 | User Manual (English) - Page 43
Insignia 32" LED TV On-screen menu overview Notes • Depending on the signal source selected, you may see different options on your screen. • Menu items that are not selectable are grayed out. • Menus in this manual are described in TV mode, unless otherwise indicated. • The screens shown in this - Insignia NS-32D200NA14 | User Manual (English) - Page 44
NS-32D200NA14 Insignia 32" LED TV . • Press MUTE to turn off the sound. Press MUTE again to turn the sound back on. Viewing picture). Lets you manually adjust picture settings such as brightness, contrast, and sharpness. Note You can also press PICTURE to select the picture mode. • Backlight-Sets - Insignia NS-32D200NA14 | User Manual (English) - Page 45
Insignia 32" LED TV • Tint-Adjusts the color balance of the picture. Use this control to make skin tones look more natural. • Sharpness-Adjusts the color detail of images. If you set this control too high, dark images may appear with light or white edges. • Advanced Video-Opens the PICTURE · - Insignia NS-32D200NA14 | User Manual (English) - Page 46
NS-32D200NA14 Insignia 32" LED TV Setting the power on picture mode You can set the picture mode your TV uses when you turn it on. To set the power on picture mode: 1 Press MENU. The on-screen menu opens. 2 Press W or X to highlight SETTINGS, then press T or ENTER. The SETTINGS menu opens. - Insignia NS-32D200NA14 | User Manual (English) - Page 47
Insignia 32" LED TV Adjusting the sound Adjusting sound settings You can adjust sound settings to improve the sound quality. You also can reset all sound settings to the factory default. To adjust sound settings: 1 Press MENU. The on-screen menu opens. 2 Press W or X to highlight AUDIO, then press T - Insignia NS-32D200NA14 | User Manual (English) - Page 48
NS-32D200NA14 Insignia 32" LED TV Selecting the audio out mode If your TV is on when you connect a device to the /AUDIO OUT jack on the side of your TV TV. The following screen opens. Playing TV audio only You can turn off the picture on your TV and listen to the program audio only. To play TV - Insignia NS-32D200NA14 | User Manual (English) - Page 49
Insignia 32" LED TV Changing channel settings Automatically scanning for channels When you scan for channels, your TV searches for channels with signals and stores the channel information in the channel list. When you press CH or CH , your TV goes to the next or previous channel in the channel list. - Insignia NS-32D200NA14 | User Manual (English) - Page 50
NS-32D200NA14 Insignia 32" LED TV C If you select Satellite Box, a message asks how you connected the satellite box to your TV: Hiding channels You can hide channels in the channel list. When you press CH or CH , your TV skips the hidden channels. You can still tune to a hidden channel by pressing - Insignia NS-32D200NA14 | User Manual (English) - Page 51
Insignia 32" LED TV Setting up a favorite channel list You can create a favorite channel list so you can quickly browse through your favorite channels by pressing FAVORITE, then selecting a channel from the favorite channel list. To set up a favorite channel list: 1 Press MENU. The on-screen menu - Insignia NS-32D200NA14 | User Manual (English) - Page 52
NS-32D200NA14 Insignia 32" LED TV Checking the digital signal strength You can check the digital signal strength to determine if you need to adjust your antenna or digital cable input. The higher the signal strength, the less likely you are to experience picture degradation. To check the digital - Insignia NS-32D200NA14 | User Manual (English) - Page 53
Insignia 32" LED TV Setting parental controls Parental controls let you prevent your children from watching inappropriate material on TV. When set, parental controls read the rating of the program (with some exceptions, such as news and sports) and deny access to programs that exceed the ratings - Insignia NS-32D200NA14 | User Manual (English) - Page 54
-32D200NA14 Insignia 32" LED TV Locking control buttons When the button lock is turned On, the buttons on the side of your TV are locked, and you can only operate your TV using the remote control. To lock control buttons: 1 Press MENU. The on-screen menu opens. 2 Press W or X to highlight SETTINGS - Insignia NS-32D200NA14 | User Manual (English) - Page 55
Insignia 32" LED TV Setting parental control levels You can set parental controls for the U.S. and Canada. U.S. rating levels U.S. TV ratings NONE Not rated TV-Y All children TV-Y7 Suitable for children 7 and older TV-G General audiences TV-PG Parental guidance suggested TV-14 - Insignia NS-32D200NA14 | User Manual (English) - Page 56
NS-32D200NA14 Insignia 32" LED TV 5 Press S or T to highlight USA Parental Locks, then press ENTER. (To set Canadian ratings, select Canadian Parental Locks.) USA Parental Locks Downloading rating information If the program you are viewing has downloadable rating information, you can download - Insignia NS-32D200NA14 | User Manual (English) - Page 57
Insignia 32" LED TV 5 Press S or T to highlight RRT5, then press ENTER. The SETTINGS · PARENTAL CONTROLS · RRT5 screen opens. The screen that opens may vary depending on the broadcaster. Using closed captioning Closed captioning displays a text version of the TV program audio or displays - Insignia NS-32D200NA14 | User Manual (English) - Page 58
NS-32D200NA14 Insignia 32" LED TV Selecting the analog closed captioning mode Analog channels usually have one or more closed captioning modes. The CC1 mode usually displays a text version of the TV 5 Press S or T to select a digital caption setting. You can select: • CS1 through CS6-CS1 is usually - Insignia NS-32D200NA14 | User Manual (English) - Page 59
Insignia 32" LED TV Customizing digital closed captioning settings To customize digital closed captioning styles: 1 Press MENU. The on-screen menu opens. 2 Press W or X to highlight SETTINGS, then press T or ENTER. The SETTINGS menu opens. 3 Press S or T to highlight Closed Caption, then press ENTER - Insignia NS-32D200NA14 | User Manual (English) - Page 60
MENU. The on-screen menu opens. 2 Press W or X to highlight SETTINGS, then press T or ENTER. The SETTINGS menu opens. 3 Press S or T to highlight Time, then press ENTER. The SETTINGS · TIME menu opens. NS-32D200NA14 Insignia 32" LED TV 7 Press ENTER to close the menu. 8 Press S or T to highlight - Insignia NS-32D200NA14 | User Manual (English) - Page 61
Insignia 32" LED TV Setting the sleep timer You can specify the amount of time before your TV automatically turns off. To set the sleep timer: 1 Press MENU. The on-screen menu opens. 2 Press W or X to highlight SETTINGS, then press T or ENTER. The SETTINGS menu opens. Adjusting menu settings - Insignia NS-32D200NA14 | User Manual (English) - Page 62
NS-32D200NA14 Insignia 32" LED TV Labeling an input source You can add a label to an input source to make it easier to identify. To label an input source: 1 Press MENU. The on-screen menu opens. 2 Press W or X to highlight SETTINGS, then press T or ENTER. The SETTINGS menu opens. Turning Input - Insignia NS-32D200NA14 | User Manual (English) - Page 63
Insignia 32" LED TV Using INlink INlink lets you control HDMI CEC-compatible devices connected to the HDMI jacks on your TV using the remote control that came with your TV. To use INlink, you must set the INlink Control setting on the SETTINGS · INlink menu to On. Notes • HDMI cables must be used - Insignia NS-32D200NA14 | User Manual (English) - Page 64
NS-32D200NA14 Insignia 32" LED TV Turning TV Auto Power On on or off TV Auto Power On automatically turns on your TV when an HDMI CEC device is turned on, if the device has this feature. To turn TV Auto Power On on or off: 1 Press MENU. The on-screen menu opens. 2 Press W or X to highlight SETTINGS - Insignia NS-32D200NA14 | User Manual (English) - Page 65
Insignia 32" LED TV Displaying a list of INlink-compatible (HDMI CEC) devices You can select an INlink-compatible device from a list, then select Connect to switch to the device or select Root Menu to open the device's root menu and use the TV remote control to control the device. To display a list - Insignia NS-32D200NA14 | User Manual (English) - Page 66
NS-32D200NA14 Insignia 32" LED TV Opening an INlink-compatible device's root menu You can open an INlink-compatible device's root menu, then use your TV's remote X to highlight SETTINGS, then press T or ENTER. The SETTINGS menu opens. Using to your TV. For connection instructions, see "Connecting - Insignia NS-32D200NA14 | User Manual (English) - Page 67
Insignia 32" LED TV To switch to an MHL-device that is already connected: 1 Press INPUT, then Roku Streaming Stick To use a Roku Streaming Stick: 1 Connect a Roku Streaming Stick to your TV. For connection instructions, see "Connecting an MHL-enabled device" on page 22. A message tells you the stick - Insignia NS-32D200NA14 | User Manual (English) - Page 68
the device. NS-32D200NA14 Insignia 32" LED TV Using a USB flash drive You can connect a USB flash drive to your TV to view compatible JPEG pictures. Notes • Never remove the USB flash drive or turn off your TV while viewing JPEG pictures. • The JPEG picture viewer only supports JPEG format images - Insignia NS-32D200NA14 | User Manual (English) - Page 69
Insignia 32" LED TV Browsing photos To browse photos: 1 Switch to USB mode. See "Switching to USB mode" on page 64. The PHOTOS menu opens. When a photo is displayed full-screen, a control bar appears at the bottom of the photo. The file name, picture resolution, size, and date are displayed on the - Insignia NS-32D200NA14 | User Manual (English) - Page 70
photos quickly. To view favorite photos: 1 Switch to USB mode. See "Switching to USB mode" on page 64. The PHOTOS menu opens. NS-32D200NA14 Insignia 32" LED TV Viewing photos in a slideshow You can view your photos in a slideshow. To view photos in a slideshow: 1 Switch to USB mode. See "Switching - Insignia NS-32D200NA14 | User Manual (English) - Page 71
Insignia 32" LED TV Customizing slideshow settings You can customize the slideshow settings, including Repeat, Shuffle, Speed, and Transition. To customize slideshow settings: 1 Switch to USB mode. See "Switching to USB mode" on page 64. The PHOTOS menu opens. 2 Press S or T to highlight Settings, - Insignia NS-32D200NA14 | User Manual (English) - Page 72
NS-32D200NA14 Insignia 32" LED TV Troubleshooting Warning Do not try to repair your TV yourself. Contact authorized service personnel. Restoring settings to the defaults When you restore default settings, all the settings you have customized (including parental controls) are reset. To restore - Insignia NS-32D200NA14 | User Manual (English) - Page 73
Insignia 32" LED TV Problem Solution Dark, poor, or no picture (screen is lit), but sound is good. • Try another channel. The station may be experiencing problems. • Make sure that the antenna or cable TV is connected correctly and securely. See "Connecting a cable or satellite box" on page 12 - Insignia NS-32D200NA14 | User Manual (English) - Page 74
NS-32D200NA14 Insignia 32" LED TV Problem Solution Dotted lines or stripes appear on the screen. • Make sure that the antenna or cable TV is connected correctly and securely. See "Connecting a cable or satellite box" on page 12 or "Connecting an antenna or cable TV (no box)" on page 17. • If you - Insignia NS-32D200NA14 | User Manual (English) - Page 75
35. • Refer to the User Guide that accompanied your universal remote control and contact the manufacturer if problems persist. General Problem Solution No power. • Make sure that the power cord is correctly connected to your TV and a power outlet. • Unplug the power cord, wait 60 seconds, then - Insignia NS-32D200NA14 | User Manual (English) - Page 76
NS-32D200NA14 Insignia 32" LED TV Problem Solution One or more channels do not display. • Make sure that the channels are not blocked. See "Setting parental control levels" on page 51. • Make sure that the channels are not hidden. The channel may have been deleted from the channel list. You - Insignia NS-32D200NA14 | User Manual (English) - Page 77
Insignia 32" LED TV Problem Solution My TV is displaying the video from the connected device but is not playing the audio. • Make sure that the volume on your mobile device is turned up and not muted. • Make sure that the volume on your TV is turned up and not muted. • Make sure that cables are - Insignia NS-32D200NA14 | User Manual (English) - Page 78
NS-32D200NA14 Insignia 32" LED TV Problem Solution The device does not show up in the INlink Device list. • Make sure that the device is turned on. • Make sure that the HDMI cable is connected securely to your TV and the device. • Make sure that the device is connected to your TV with an HDMI - Insignia NS-32D200NA14 | User Manual (English) - Page 79
Insignia 32" LED TV Specifications Specifications are subject to change without notice. Dimensions and weight Without stand With stand 28.8 × 17.4 × 3.0 in. (73.2 × 44.1 × 7.5 cm) 11.5 lb. (5.2 kg) 28.8 × 18.7 × 8.2 in. (73.2 × 47.6 × 20.8 cm) 13.7 lb. (6.2 kg) Screen Screen size measured - Insignia NS-32D200NA14 | User Manual (English) - Page 80
NS-32D200NA14 Insignia 32" LED TV Programming universal remote controls You can operate your Insignia TV with a new or existing universal remote control. To program a universal remote control: 1 See the table in "Common universal remote control codes" for common codes. If you have problems - Insignia NS-32D200NA14 | User Manual (English) - Page 81
Insignia 32" LED TV Legal notices FCC Statement This device complies with Part 15 of the FCC to certain features, settings, and functionalities of this TV (i.e. Picture, Sound) can increase or change the power consumption. Depending upon such changed settings, the power consumption may exceed the - Insignia NS-32D200NA14 | User Manual (English) - Page 82
NS-32D200NA14 Insignia 32" LED TV One-year limited warranty Insignia Televisions Definitions: Insignia Products ("Insignia") warrants to you, the original purchaser of this new Insignia-branded television ("Product"), that the Product shall be free of defects in the original manufacturer of the - Insignia NS-32D200NA14 | User Manual (English) - Page 83
) 467-4289 Distributed by Best Buy Purchasing, LLC 7601 Penn Avenue South, Richfield, MN 55423-3645 USA © 2013 BBY Solutions, Inc. All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
 |
 |
NS-32D200NA14
User Guide
32" LED TV
Before using your new product, please read these instructions to prevent any damage.