Insignia NS-BRDVD3 User Manual (English) - Page 21

Configuring the Internet connection, Maintaining, General guidelines, Electrical disturbance, - manual

Page 21 highlights

Blu-Ray Disc Player Configuring the Internet connection To configure the Internet connection: 1 Press ENTER. The Settings menu opens. 2 Press or to select Network, then press ENTER. 3 Press , press or to select Wired, then press ENTER. The IP Settings screen opens. The IP Settings screen opens. 4 Press or to select IP Mode, then press ENTER. 5 Press to select an IP mode. You can select: • Dynamic-Uses DHCP to automatically obtain an IP address. • Manual-Lets you manually configure network settings, such as IP address, subnet mask, and gateway settings. • Off-Disables the network interface. 6 Press to go to the previous menu. Maintaining General guidelines • The top and back panels of your player may become hot after a long period of use. This is not a malfunction. • When your are not using your player, make sure that you remove the disc and put your player into standby mode. • If you do not use your player for a long period of time, it may not function correctly. Turn on and use your player occasionally. • Do not place objects on the disc tray. • Do not locate your player: • Near heating devices or in an enclosed vehicle • In an area with a temperature over 104°F (40°C) or humidity over 90% • Dirty places • In an area with direct exposure to sunlight • Do not install this equipment in a confined space such as a book case or similar unit. The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table-cloths, or curtains. • Make sure that you leave a minimum of 4 inches (10 cm) around your player for sufficient ventilation. Electrical disturbance If you place your player next to a radio, TV, or VCR, the image may be poor and the sound may be distorted. In this case, move your player away from the radio, TV, or VCR. Condensation Condensation may form inside your player when: • You move your player from a cold area to a warm area • You use it in a cold room where you have just turned on a heater • Air conditioning is blowing directly on your player • Your player is in a damp place If condensation forms inside your player, your player will not work correctly. Turn on your player, remove the disc and leave the tray open, then leave your player on for two to three hours. To minimize condensation problems, keep the power cord connected to a power outlet. Storing discs • Do not store discs in a place that is exposed to direct sunlight or heat. • Do not store discs in a place that is exposed to moisture and dust, such as a bathroom or near a humidifier. • Store discs vertically in their cases. Stacking discs or placing objects on discs when not in their cases may cause warping. www.insigniaproducts.com 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

17
Blu-Ray Disc Player
www.insigniaproducts.com
Configuring the Internet connection
To configure the Internet connection:
1
Press
ENTER
. The
Settings
menu opens.
2
Press
or
to select
Network
, then press
ENTER
.
3
Press
, press
or
to select
Wired
, then press
ENTER
. The
IP Settings
screen opens. The
IP
Settings
screen opens.
4
Press
or
to select
IP Mode
, then press
ENTER
.
5
Press
to select an IP mode. You can select:
Dynamic
—Uses DHCP to automatically
obtain an IP address.
Manual
—Lets you manually configure
network settings, such as IP address, subnet
mask, and gateway settings.
Off
—Disables the network interface.
6
Press
to go to the previous menu.
Maintaining
General guidelines
The top and back panels of your player may
become hot after a long period of use. This is not a
malfunction.
When your are not using your player, make sure
that you remove the disc and put your player into
standby mode.
If you do not use your player for a long period of
time, it may not function correctly. Turn on and
use your player occasionally.
Do not place objects on the disc tray.
Do not locate your player:
Near heating devices or in an enclosed vehicle
In an area with a temperature over 104°F
(40°C) or humidity over 90%
Dirty places
In an area with direct exposure to sunlight
Do not install this equipment in a confined
space such as a book case or similar unit. The
ventilation should not be impeded by
covering the ventilation openings with items
such as newspapers, table-cloths, or curtains.
Make sure that you leave a minimum of 4 inches
(10 cm) around your player for sufficient
ventilation.
Electrical disturbance
If you place your player next to a radio, TV, or VCR,
the image may be poor and the sound may be
distorted. In this case, move your player away from
the radio, TV, or VCR.
Condensation
Condensation may form inside your player when:
You move your player from a cold area to a warm
area
You use it in a cold room where you have just
turned on a heater
Air conditioning is blowing directly on your player
Your player is in a damp place
If condensation forms inside your player, your
player will not work correctly. Turn on your player,
remove the disc and leave the tray open, then leave
your player on for two to three hours.
To minimize condensation problems, keep the
power cord connected to a power outlet.
Storing discs
Do not store discs in a place that is exposed to
direct sunlight or heat.
Do not store discs in a place that is exposed to
moisture and dust, such as a bathroom or near a
humidifier.
Store discs vertically in their cases. Stacking discs
or placing objects on discs when not in their cases
may cause warping.