Intel BLKDQ35JOE Product Specification - Page 53
Jumper Block
UPC - 200001401862
View all Intel BLKDQ35JOE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Overview of BIOS Features 2.3 Jumper Block CAUTION Do not move the jumper with the power on. Always turn off the power and unplug the power cord from the computer before changing a jumper setting. Otherwise, the board could be damaged. Figure 15 shows the location of the jumper block. The jumper determines the BIOS Setup program's mode. Table 26 lists the jumper settings for the three modes: normal, configure, and recovery. When the jumper is set to configure mode and the computer is powered-up, the BIOS compares the processor version and the microcode version in the BIOS and reports if the two match. Figure 15. Location of the Jumper Block Table 26. BIOS Setup Configuration Jumper Settings Function/Mode Jumper Setting Configuration Normal 1-2 The BIOS uses current configuration information and passwords for booting. Configure 2-3 321 After the POST runs, Setup runs automatically. The maintenance menu is displayed. Recovery None 321 321 The BIOS attempts to recover the BIOS configuration. See Section 3.7 for more information on BIOS recovery. 53