Intel S815EBM1 Product Guide - Page 34

Connecting the IDE Cable, The cable supports Ultra ATA/66 and Ultra

Get Intel S815EBM1 - Server Board Motherboard PDF manuals and user guides
UPC - 735858149839
View all Intel S815EBM1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

Connecting the IDE Cable The Intel® boxed server board package includes a 40-contact, 80-conductor IDE cable. It is capable of connecting two drives to the server board. The cable supports Ultra ATA/66 and Ultra ATA/100 transfer protocols and is backward compatible with drives using slower IDE transfer protocols. For the cable to function correctly: • Attach the cable end with the single connector (A), which is black and labeled PRI IDE, to the server board as shown in Figure 18. • Attach the cable end with the two closely spaced connectors (B), which are gray and black and are labeled P2 and P3, to the drives. • If connecting only one IDE drive, be sure to connect the drive to the gray connector (P3). B A Figure 18. Connecting the IDE Cable OM12205 34 Intel Server Board S815EBM1 Product Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
34
Intel Server Board S815EBM1 Product Guide
Connecting the IDE Cable
The Intel
®
boxed server board package includes a 40-contact, 80-conductor IDE cable.
It is
capable of connecting two drives to the server board.
The cable supports Ultra ATA/66 and Ultra
ATA/100 transfer protocols and is backward compatible with drives using slower IDE transfer
protocols.
For the cable to function correctly:
•
Attach the cable end with the single connector (A), which is black and labeled PRI IDE, to the
server board as shown in Figure 18.
•
Attach the cable end with the two closely spaced connectors (B), which are gray and black and
are labeled P2 and P3, to the drives.
•
If connecting only one IDE drive, be sure to connect the drive to the gray connector (P3).
OM12205
A
B
Figure 18.
Connecting the IDE Cable