Intel S815EBM1 Product Guide - Page 50
IDE Configuration Submenu, Advanced, IDE Configuration
UPC - 735858149839
View all Intel S815EBM1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Table 14. Peripheral Configuration Submenu (continued) Feature Options Description Base I/O Address (This feature is present only when Parallel Port is set to Enabled) Interrupt (This feature is present only when Parallel Port is set to Enabled) • 378 • 278 • IRQ 5 • IRQ 7 Specifies the base I/O address for the parallel port. Specifies the interrupt for the parallel port. LAN Device Legacy USB Support • Disabled • Enabled • Disabled • Enabled Enables or disables the LAN device. Enables or disables USB legacy support. (See USB Support on page 13 for more information. IDE Configuration Submenu To access this submenu, select Advanced on the menu bar, then IDE Configuration. Maintenance Main Advanced Security Power PCI Configuration Boot Configuration Peripheral Configuration IDE Configuration Diskette Configuration Event Log Configuration Boot The menu represented in Table 15 is used to configure IDE device options. Exit Table 15. IDE Configuration Submenu Feature IDE Controller Hard Disk Pre-Delay Options • Disabled • Primary • Secondary • Both • Disabled • 3 Seconds • 6 Seconds • 9 Seconds • 12 Seconds • 15 Seconds • 21 Seconds • 30 Seconds Description Specifies the integrated IDE controller. Primary enables only the primary IDE controller. Secondary enables only the secondary IDE controller. Both enables both IDE controllers. Specifies the hard disk drive pre-delay. continued 50 Intel Server Board S815EBM1 Product Guide