Intel SBXL52 Hardware Maintenance Manual - Page 65
Completing the installation, Installing the blade server bezel assembly
View all Intel SBXL52 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
xxCAUTION: Hazardous energy is present when the blade server is connected to the power source. Always replace the blade cover before installing the blade server. 9. Reinsert the blade server into the bay in the SBCE unit. 10. Turn on the blade server. 11. Start the blade server Configuration/Setup Utility program and set configuration parameters as needed. See "Using the Configuration/Setup Utility program" on page 11 for information. Completing the installation To complete the installation, perform the following tasks. Instructions for each task are in the following sections. 1. Reinstall the blade server bezel assembly, if you removed it (see "Installing the blade server bezel assembly"). 2. Close the blade server cover, unless you installed the SCSI storage expansion unit option (see "Closing the blade server cover" on page 52). xxCAUTION: Hazardous energy is present when the blade server is connected to the power source. Always replace the blade cover before installing the blade server. 3. Reinstall the blade server into the SBCE unit (see "Installing the blade server in the SBCE unit" on page 54). 4. Turn on the blade server (see "Turning on the blade server" on page 5). 5. For certain options, run the blade server Configuration/Setup Utility program (see "Updating your blade server configuration" on page 56). ✏ NOTE If you have just connected the power cords of your SBCE unit to electrical outlets, you will have to wait until the power-on LED on the blade server flashes slowly before pressing the power-control button on a blade server. Installing the blade server bezel assembly The following illustration shows how to install the bezel assembly on the blade server. Installing options 51