Invacare 4V66FLR Owners Manual - Page 24

Installing/Removing the Front, Rigging/Eleveating Legrests, Raising/Lowering the Elevating Legrests

Get Invacare 4V66FLR PDF manuals and user guides View all Invacare 4V66FLR manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

4.2 Installing/Removing the Front Rigging/Eleveating Legrests WARNING! - After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely - otherwise injury or damage may occur. Installing Front Riggings 1. Position the front rigging assembly A to the side of the wheelchair frame B. 2. Insert footrest mounting pin C into mounting tube D. 3. Rotate the front rigging assembly towards the inside of the wheelchair until it locks into place. The footplate will be on the inside of the wheelchair when locked in place. 4. Repeat this procedure for the other front rigging assembly. A C A D B Front rigging shown. Elevating legrests install the same way. 1567855-C Operation Removing the Front Riggings 1. Push or pull the front rigging release lever A to the side. 2. If desired, rotate front rigging assembly B outward or inward. 3. Lift the front rigging assembly off of the mounting tube C. A B A Front rigging shown. Elevating legrests Remove the same way. 4.3 Raising/Lowering the Elevating Legrests WARNING! - Ensure hands and fingers are clear of elevating legrest mechanism before pushing release lever to lower the elevating legrest. Otherwise injury may occur due to pinch points. - The wheelchair user's leg MUST be supported by an assistant before attempting to lower legrest. 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
Operation
4.2
Installing/Removing the Front
Rigging/Eleveating Legrests
WARNING!
–
After any adjustments, repair or service and before
use, make sure all attaching hardware is tightened
securely - otherwise injury or damage may occur.
Installing Front Riggings
1.
Position the front rigging assembly
A
to the side of the
wheelchair frame
B
.
2.
Insert footrest mounting pin
C
into mounting tube
D
.
3.
Rotate the front rigging assembly towards the inside of the
wheelchair until it locks into place.
The footplate will be on the inside of the wheelchair
when locked in place.
4.
Repeat this procedure for the other front rigging assembly.
Front rigging shown. Elevating legrests install the same
way.
Removing the Front Riggings
1.
Push or pull the front rigging release lever
A
to the side.
2.
If desired, rotate front rigging assembly
B
outward or inward.
3.
Lift the front rigging assembly off of the mounting tube
C
.
Front rigging shown. Elevating legrests Remove the same
way.
4.3
Raising/Lowering the Elevating Legrests
WARNING!
–
Ensure hands and fingers are clear of elevating legrest
mechanism before pushing release lever to lower the
elevating legrest. Otherwise injury may occur due to
pinch points.
–
The wheelchair user’s leg MUST be supported by an
assistant before attempting to lower legrest.
1567855-C
23