Invacare MA65 Owners Manual - Page 16
Installing the Bed Side Rails, Installing the Power Unit, Connecting the Hose
View all Invacare MA65 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
microAIR® MA65 Series 4.3 Installing the Bed Side Rails Refer to the Bed Rail Entrapment Risk Notification Guide at www.invacare.com for additional safety information. Refer to the instructions provided with the side rails for the installation procedure. 4.4 Installing the Power Unit 4.5 Connecting the Hose CAUTION! Risk Of Injury Or Damage To prevent falling, stepping on the hose, or causing other injuries or damage: - Ensure that the hose connecting the control unit to the mattress is routed such that it cannot be stepped on, kinked, squeezed or otherwise damaged. 1. Locate the hose A at the foot end of the mattress. 2. Locate the control unit connectors B on the right side of the control unit. 3. Squeeze and hold the tabs C on the hose connectors D. 4. Push the hose connectors onto the control connectors until an audible click is heard. The audible click indicates that the hose connectors are properly engaged with the control connectors. 1. Pull out the bed hook A on the back of the control unit. 2. Place the control unit on the footboard. If the bed does not have a footboard, place the control unit on a flat surface, leaving room for the hose to hang down. DO NOT place control unit on mattress. 16 1148137-H