Invacare MA65 Owners Manual - Page 21
Static Button, Firm/Soft Buttons, Fowler Button, Manual Mode, Automatic Wireless Mode, Fowler
View all Invacare MA65 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
5.1.4 Static Button 1. Press the Static button C to enter Static mode and maintain all air cushions in the mattress at a constant pressure. The Static LED is illuminated Green. 5.1.5 Firm/Soft Buttons 1. Select comfort pressure settings by pressing Firm D or Soft E button. • Soft Button - Pressing this button reduces the pressure setting in the mattress. • Firm Button - Pressing this button increase the pressure setting in the mattress. The patient comfort pressure ranges from Soft (level 0 = 8 ±4 mmHg) to Firm (level 9 = 32 ±4 mmHg). The Comfort Control LED displays the patient comfort pressure levels from 0 to 9 and provides a guide to the caregiver to set approximate comfort pressure level depending on the patient weight. If the patient's weight to height ratio is above average, increase the pressure setting by approximately 20%. Usage 5.1.6 Fowler Button Manual Mode 1. Press the Fowler button F to activate the patient fowler mode. Fowler LED illuminates when in this mode. When this mode is activated, control unit increases pressure in mattress to prevent patient from bottoming out. Automatic Wireless Mode When the bed articulates to 45°, the transmitter in the head of the mattress signals the control unit to add 25% more air into the mattress to prevent the patient from bottoming out. Fowler Transmitter Setup 1. Make sure the bed is in the flat position. 2. Make sure fowler transmitter is in the mattress cover pocket in the orientation indicated on the transmitter. Mattress cover pocket is on the inside of the mattress cover on the bottom left side at the head end. 3. Press and hold the Mode and Fowler buttons. The Fowler LED is lit and L displays in the LCD Display. 1148137-H 21