Invacare MA65 Owners Manual - Page 23
Powering Up the System
View all Invacare MA65 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
5.1.8 Lock/Alarm Silence Button 1. Press the Lock/Alarm Silence button H to select one of the following modes: • Lock Mode - Holding this button locks out all control unit functions, including the Power button, to prevent any tampering with the settings. Press the button for approximately 3-5 seconds for the Lock LED to activate. The Lock LED illuminates when in this mode. • Alarm Silence mode - Pressing this button silences the alarm that sounds in the event of power failure or when the hose is disconnected from the control unit. The Alarm LED illuminates when in this mode. 5.1.9 Power Fail LED In the event of power outage, an alarm sounds and Power Fail LED I flashes Amber. The control unit has internal memory and retains the previous settings during the power outage. During a power outage, the mattress retains the air as long as the mattress is connected to the control unit. Usage Periodically test alarm by unplugging the power cord from the wall outlet while unit is on. See troubleshooting section of this manual if alarm fails to sound. 5.1.10 Low Pressure LED In the event that the mattress hose disconnects, an alarm sounds and Low Pressure LED J flashes Amber. Once the low pressure problem is fixed, the control unit resumes operation in the previously set mode. Periodically test alarm by disconnecting the mattress hose. It may take up to 15 minutes for unit to lose enough air for alarm to sound. See troubleshooting section of this manual if alarm fails to sound. 5.2 Powering Up the System 1. Turn on the power to the system by pressing the Power button on the control unit. Once the button is released, a green led illuminates when the unit is on. 1148137-H 23