JVC A805 Instructions - Page 20

Listening to the CD changer

Page 20 highlights

ENGLISH WXYZ-HD1 Lights up when holding the digital reception Flashes when holding the analog reception [Initial] Switch between digital and analog audio automatically Tuning to digital audio only Tuning to analog audio only • If no sound can be heard from the selected setting, change the setting to or . • The setting automatically changes to if you tuned in to or change to another station, or if you turned off the power. • This setting cannot take effect for the conventional FM/AM stations. • If the radio station forces the reception mode to digital or analog, the or indicator lights up. Listening to the CD changer It is recommended to use a JVC MP3-compatible CD changer (not supplied) with your unit. You can connect a CD changer to the CD changer jack on the rear of the unit. • You can only play conventional CDs (including CD Text) and MP3 discs. Preparation: Make sure is selected in the = setting, see page 33. 1 Select "CD-CH." 2 Enter "LIST" screen. 3 Select a disc, folder, then the track. [Turn] = [Press] Playback starts automatically. • If there is no disc on the selected tray, the unit beeps. • To select another folder/track while playing (for MP3 discs), repeat steps 2 and 3 above until the desired folder/ track is selected. The selection always start from disc number first. • If another disc/folder is selected, playback starts from the 1st track of the selected disc/folder. 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151

ENGLISH
20
Listening to the CD changer
It is recommended to use a JVC MP3-compatible CD changer (not supplied) with your unit. You can connect a CD
changer to the CD changer jack on the rear of the unit.
You can only play conventional CDs (including CD Text) and MP3 discs.
Preparation:
Make sure <
Changer
> is selected in the <
Source Select
>
=
<
Ext Input
> setting, see page 33.
1
Select “
CD-CH
.”
2
Enter “LIST” screen.
3
[Turn]
=
[Press]
Select a disc, folder, then the track.
Playback starts automatically.
If there is no disc on the selected tray, the unit beeps.
To select another folder/track while playing (for MP3 discs), repeat steps
2
and
3
above until the desired folder/
track is selected. The selection always start from disc number first.
If another disc/folder is selected, playback starts from the 1st track of the selected disc/folder.
<
Auto
>
[Initial] Switch between digital and
analog audio automatically
<
Digital
>
Tuning to digital audio only
<
Analog
>
Tuning to analog audio only
Lights up when holding the digital reception
Flashes when holding the analog reception
WXYZ-HD1
If no sound can be heard from the selected setting,
change the setting to <
Analog
> or <
Digital
>.
The setting automatically changes to <
Auto
> if you
tuned in to or change to another station, or if you
turned off the power.
This setting cannot take effect for the conventional
FM/AM stations.
If the radio station forces the reception mode to
digital or analog, the
or
indicator lights
up.