JVC FS-GD7 Instruction Manual - Page 10
Changing the Scanning Mode
View all JVC FS-GD7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
To assemble and connect the AM loop antenna To assemble the AM loop antenna Changing the Scanning Mode Remote ONLY This System supports progressive scanning. If you connect a progressive TV through the COMPONENT jacks, you can enjoy a high quality picture from the built-in DVD player by selecting progressive mode. To connect the AM loop antenna 1 Hold 2 Insert 3 Release PROGRE INTER (at the same time) PROGRE (Progressive) INTER (Interlaced) Progressive scanning. For a progressive TV. The PROGRESSIVE indicator lights. Interlaced scanning. For a conventional TV. • If the AM loop antenna wire or speaker cords are covered with vinyl, remove the vinyl to expose the tip of the antenna by twisting the vinyl. • Make sure the antenna conductors do not touch any other terminals, connecting cords and power cord. Also, keep the antennas away from metallic parts of the System, connecting cords, and the AC power cord. This could cause poor reception. To connect the speaker cords Connect the right speaker to the R terminals, and the left speaker to the L terminals. 1 Hold 2 Insert 3 Release When connecting the speaker cords, match the polarity of the speaker terminals: gray cord (+) to red (+) and gray cord with black stripe (-) to black (-). • DO NOT connect more than one speaker to each terminal. • DO NOT allow the conductor of the speaker cords to be in touch with the metallic parts of the System. 6