JVC FS-GD7 Instruction Manual - Page 21
Setting the Clock
View all JVC FS-GD7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
To adjust the picture tone 1 Select "USER1" or "USER2." • Follow steps 1 and 2 explained on page 16. 2 Select a parameter you want to adjust. Setting the Clock Remote ONLY Without setting the built-in clock, you cannot use the Daily Timer (see page 30) and Sleep Timer (see page 18). • To exit from the clock setting, press CLOCK/TIMER as required. • To go back to the previous step, press CANCEL. 1 Activate the clock setting mode. GAMMA BRIGHTNESS CONTRAST SATURATION TINT SHARPNESS Adjust if the neutral color is bright or dark (-3 to +3). Adjust if the entire picture is bright or dark (-8 to +8). Adjust if the far and near positions are unnatural (-7 to +7). Adjust if the picture is whitish or blackish (-7 to +7). Adjust if the human skin color is unnatural (-7 to +7). Adjust if the picture is indistinct (-8 to +8). 3 Adjust the parameter. • If you have already adjusted the clock before, press the button repeatedly until the clock setting mode is selected (see page 30). 2 Adjust the hour. 3 Adjust the minute. 4 Repeat steps 2 to 3 to adjust other parameters. To erase the screen, press VFP again. Now the built-in clock starts working. To check the current clock time during play Clock Source information (at the same time) • While playing a DVD or MP3, you cannot check the current clock time (see page 9). 17