JVC FS-GD7 Instruction Manual - Page 18

Playing Back from the PC This System is equipped with a USB terminal on the front panel. You can connect your PC to this terminal and enjoy sound reproduced through your PC. When you connect your PC for the first time, follow the procedure below. • Remember you cannot send any signal or data to your PC from this System. IMPORTANT • Always set volume to "VOL MIN" when connecting or disconnecting the other equipment. How to install the USB drivers 1 Turn on your PC and start running WindowsR 98, WindowsR 98SE, WindowsR Me, WindowsR 2000, or WindowsR XP. • If the PC has been turned on, quit all the applications running. 2 Select USB for the source. Playing Back from Other Equipment To connect other equipment By using an stereo mini plug cord (not supplied), you can connect other equipment with analog audio output jacks, such as an MD player, a TV, etc. Stereo mini plug cord (not supplied) (front panel) Portable audio device, Game machine, etc. If the audio output on the other equipment is not stereo mini plug type, Use a plug adapter to convert the stereo mini plug to the corresponding plug of the audio output. • Refer to the manuals supplied with the other equipment. IMPORTANT • Always set volume to "VOL MIN" when connecting or disconnecting the other equipment. To select other equipment for the source 3 Connect the System to the PC using a USB cable (not supplied). (front panel) PC USB cable • Use "USB series A plug to B plug" cable when connecting. 4 The USB drivers are installed automatically. To play back sounds on the PC Refer to the manuals supplied with the sound reproduction application installed in the PC. * MicrosoftR, WindowsR 98, WindowsR 98SE, WindowsR Me, WindowsR 2000 and WindowsR XP are registered trademarks of Microsoft corporation. 14