JVC GR-D372 Instructions - Page 16

16 EN GETTING STARTED Language Settings Date/Time Settings The language on the display can be changed. (੬ pg. 29, 31) 1 Set the Power Switch to "REC" while pressing down the Lock Button located on the switch. M 2 Open the LCD monitor fully. (੬ pg. 19) 3 Set the recording mode to " ".(੬ pg. 15) 4 Press MENU. The Menu Screen appears. 5 Press 3, 4, 2 or 1 to select "DISPLAY", and LANGUAGE press SET. The DISPLAY Menu appears. 6 Press 3, 4, 2 or 1 to select "LANGUAGE", and press SET. 7 Press 3 or 4 to select the desired language, LANGUAGE and press SET or 2. ● Press 1 whenever you want to return to the previous menu screen. 8 Press MENU. The ENGLISH FRANÇAIS ESPAÑOL PORTUGUÊS Menu Screen closes. The date/time is recorded onto the tape at all times, but its display can be turned on or off during playback. (੬ pg. 31, 32) 1 Perform steps 1 - 5 in "Language Settings" (on the left column) 2 Press 3, 4, 2 or 1 to select "CLOCK ADJ.", and press SET. The date display format is highlighted. 3 Press 3 or 4 to select the desired date display format, then press SET or 2. Select from "MONTH.DATE.YEAR", "DATE.MONTH.YEAR" or "YEAR.MONTH.DATE". 4 Press 3 or 4 to select the time display format, then press SET or 2. Select from "24h" or "12h". 5 Set the year, month, date, hour and minute. Press 3 or 4 to select the value, then press SET or 2. Repeat this step until you have input all the settings. NOTE: Press 1 to return to the previous setting. 6 Press MENU.The Menu screen closes. CLOCK ADJ . MONTH . DATE . YEAR 1 2h DEC . 06 . 2 006 07 : 05 AM Grip Adjustment 1 Adjust the velcro strip. 2 Pass your right hand through the loop and grasp the grip. 3 Adjust your thumb and fingers through the grip to easily operate the Recording Start/Stop Button, Power Switch and Power Zoom Lever. Be sure to fasten the velcro strip to your preference.