JVC GR-D372 Instructions - Page 28
To Print By Selecting Still Images And Number Of Prints, To Reset The Number Of Prints
UPC - 046838026935
View all JVC GR-D372 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
28 EN ADDITIONAL FEATURES FOR D.S.C. To Print By Selecting Still Images And Number Of Prints 1 Perform steps 1 - 3 in "To Print All Still Images (One Print For Each)". (੬ pg. 27) 2 Press 4 or 3 to select "CURRENT", and press SET or 2. The DPOF screen appears. 3 Press 1 or 2 to select the desired file. 4 Press 4 or 3 to select the number indication (00), and press SET. 5 Select the number of prints by pressing 3 to increase the number, or 4 to decrease the number, and press SET. ● Repeat steps 3 through 5 for the desired number of prints. ● The number of prints can be set up to 15. ● To correct the number of prints, select the image again and change the number. 6 Press 4 or 3 to select "RETURN", and press SET. The "SAVE?" appears. ● If you did not change any settings in step 3 through 5, the DPOF Menu reappears. 7 Press 4 or 3 to select "EXECUTE" to save the setting you have just made, and press SET. ● To cancel selection, select "CANCEL". To Reset The Number Of Prints Initializing A Memory Card You can initialize a memory card any time. After initializing, all files and data stored in the memory card, including those which have been protected, are cleared. 1 Set the VIDEO/MEMORY Switch to "MEMORY". 2 Set the Power Switch to "PLAY" while pressing down the Lock Button located on the switch. 3 Press MENU. The Menu Screen appears. 4 Press 4, 3, 1 or 2 to select "FORMAT", and press SET. The FORMAT screen appears. 5 Press 4 or 3 to select "EXECUTE", and press SET. The memory card is initialized. ● When initialization is finished, "NO IMAGES STORED" appears. ● To cancel initialization, select "RETURN". CAUTION: Do not perform any other operation (such as turning off the camcorder) during initialization. Also, be sure to use the provided AC Adapter, as the memory card may be corrupted if the battery becomes exhausted during initialization. If the memory card becomes corrupted, initialize it. 1 Perform steps 1 - 3 in "To Print All Still Images (One Print For Each)". (੬ pg. 27) 2 Press 4 or 3 to select "RESET", and press SET. The DPOF screen appears. 3 Press 4 or 3 to select "EXECUTE", and press SET. The normal playback screen appears. ● To cancel selection, select "RETURN". ● The number of prints is reset to 0 for all still images. CAUTION: While performing the above, never disconnect power, as this may cause the memory card to be corrupted.