JVC HR-XVC33U Instruction Manual

JVC HR-XVC33U Manual

Get JVC HR-XVC33U PDF manuals and user guides View all JVC HR-XVC33U manuals
Add to My Manuals
Save this manual to your list of manuals

JVC HR-XVC33U manual content summary:

  • JVC HR-XVC33U | Instruction Manual - Page 1
    DVD PLAYER & VIDEO CASSETTE RECORDER HR-XVC33U INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located on the rear of cabinet. Retain this information for future reference. Model No. Serial No. LPT0853-001B
  • JVC HR-XVC33U | Instruction Manual - Page 2
    for purchasing the JVC DVD player & VHS to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: Declaration of Conformity Model Number: HR-XVC33U Trade Name: JVC Responsible Party: JVC Americas Corp. Address: 1700
  • JVC HR-XVC33U | Instruction Manual - Page 3
    marked with the following. DVD (8 cm /12 cm disc top and at the rear.) When discarding batteries, environmental problems must be considered and the local rules or laws governing heed the following precautions may result in damage to the unit, Remote or video cassette. 1. DO NOT place the unit - -
  • JVC HR-XVC33U | Instruction Manual - Page 4
    servicing. ATTENTION Follow and obey all warnings and instructions marked on your product and its operating instructions. For your safety, please read all the safety and operating instructions with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an
  • JVC HR-XVC33U | Instruction Manual - Page 5
    or other hazards. 4. Safety Check Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in safe operating condition. HOW TO USE THIS INSTRUCTION MANUAL ● All major sections and subsections are listed in the
  • JVC HR-XVC33U | Instruction Manual - Page 6
    With A Built-in DTS (DVD deck only 74 SUBSIDIARY SETTINGS 75 Mode Set (VCR deck 75 Mode Set (DVD deck 78 Child Lock 82 Scan Mode Set (DVD deck 82 TROUBLESHOOTING 83 QUESTIONS AND ANSWERS 88 SPECIFICATIONS 89 LIST OF TERMS 90 FOR SERVICING (Only in U.S.A.) 92 WARRANTY (Only
  • JVC HR-XVC33U | Instruction Manual - Page 7
    region number includes "1" can be played back such as shown below. Examples of DVD VIDEO labels which can be played back using this unit. Marks of discs in this instruction manual Allows operation with a DVD VIDEO disc. Allows operation with a Video CD disc. Allows operation with a disc including
  • JVC HR-XVC33U | Instruction Manual - Page 8
    , that in some cases a disc may not include a mark even for a function it supports. Marks related to video Mark Description Number of subtitles DISC INFORMATION (cont.) File Structure of Discs DVD VIDEO Typically, DVD VIDEO discs are made up of larger units called "titles". Each title has
  • JVC HR-XVC33U | Instruction Manual - Page 9
    Placing a Disc 1 Open the disc tray. Press OPEN/CLOSE (x) on the DVD deck to open the disc tray. x ● Pressing the button again closes the disc tray. ● Do not block the disc tray with your hand while it
  • JVC HR-XVC33U | Instruction Manual - Page 10
    INDEX A Power Button (POWER (1)) ੬ pg. 18 B VCR Indicator ੬ pg. 28, 33 C VHS Cassette Loading Slot D VCR/DVD Button ੬ pg. 28, 33, 42 E Disc Tray F Stop Button (STOP (8)) ੬ pg. 28, 33, 42 G DVD Indicator ੬ pg. 42 H Play Button (PLAY (4)) ੬ pg. 28, 42 I DVD Open/Close Button (OPEN/CLOSE (x)) ੬ pg. 42
  • JVC HR-XVC33U | Instruction Manual - Page 11
    pg. 41 D Channel/Clock Mode Display (F-1) (VCR deck only) Counter Display (VCR deck) Tape Speed (SP/EP) (VCR deck only) Multi-information window* (DVD deck) * The current group/title/track/chapter number(s), time and status information. E VCR Mode Indicator F VCR Indicator ੬ pg. 34 G Cassette Type
  • JVC HR-XVC33U | Instruction Manual - Page 12
    12 EN INDEX (cont.) ON-SCREEN DISPLAY (VCR deck) If you press DISPLAY on the Remote when "SUPERIMPOSE" is set to "ON" (੬ pg. 76), various operational indicators appear on the TV screen. For On-screen display for DVD deck, refer to "Using the on-screen bar" (੬ pg. 48). A Operation Mode Indicators
  • JVC HR-XVC33U | Instruction Manual - Page 13
    Button (DVD PICTURE) ੬ pg. 47 How To Use Before use, insert two AA size batteries into the Remote with the polarity ( and ) matched correctly as indicated on the battery compartment or on the lid. The Remote can operate most of your unit's functions, as well as basic functions of TV sets of JVC and
  • JVC HR-XVC33U | Instruction Manual - Page 14
    . ● Set your TV to AV mode. ● For switching the TV's mode, refer to the instruction manual of your television. ● To obtain high-quality pictures, you can also use the S-VIDEO connection or Component Video Connection. (DVD deck only) (੬ pg. 15, 16) D Connect the unit to power source. Plug the end
  • JVC HR-XVC33U | Instruction Manual - Page 15
    as per "AV Connection". (੬ pg. 14) B Connect the unit's S VIDEO OUTPUT (DVD) connector to the TV's S-VIDEO input connector. B Connect the unit to power source. VCR button on the unit's Remote to set your TV to the AV mode. (੬ pg. 73) ● For switching the TV's mode, refer to the instruction manual
  • JVC HR-XVC33U | Instruction Manual - Page 16
    ATTENTION Be sure to connect the unit's VIDEO OUTPUT (DVD/ VCR) connector to the TV's VIDEO input connector. Antenna can also use the TV/VCR button on the unit's Remote to set your TV to the AV mode. (੬ pg. 73) ● For switching the TV's mode, refer to the instruction manual of your television. To
  • JVC HR-XVC33U | Instruction Manual - Page 17
    channel from an adjacent time zone, or an incorrect PBS channel from a cable TV system. In this case, perform "Semiauto Clock Set" (੬ pg. 25) or "Manual Clock Set" (੬ pg. 25). ● If "- -:- -" appears on the front display panel, your antenna cable may not be connected to the unit or there may not
  • JVC HR-XVC33U | Instruction Manual - Page 18
    INITIAL SETTINGS (cont.) A Turn on the unit. Press POWER (1). B Select the DVD deck. On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up. On the Remote Press DVD so that the DVD indicator lights up. C Access the DVD Set Up menu screen. A Press SET UP MENU. B Press w e to
  • JVC HR-XVC33U | Instruction Manual - Page 19
    appear; however, the left and right edges of the pictures will not be shown on the screen. EN 19 Pan&Scan/Letter Box In general, DVD VIDEO disc are produced for a wide-screen TV with 16:9 aspect ratio. Material with this ratio will not fit to a TV with 4:3 aspect ratio. There
  • JVC HR-XVC33U | Instruction Manual - Page 20
    -screen messages in 3 different languages. A Turn on the unit. Press POWER (1). B Select the VCR deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the Remote Press VCR so that the VCR indicator lights up. C Access the Main Menu screen. Press SET UP MENU. D Access the
  • JVC HR-XVC33U | Instruction Manual - Page 21
    can change the language setting manually as required. A Turn on the unit. Press POWER (1). B Select the DVD deck. On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up. On the Remote Press DVD so that the DVD indicator lights up. C Access the DVD Set Up menu screen. A Press
  • JVC HR-XVC33U | Instruction Manual - Page 22
    as an example. A Turn on the unit. Press POWER (1). B Select the DVD deck. On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up. On the Remote Press DVD so that the DVD indicator lights up. C Access the DVD Set Up menu screen. A Press SET UP MENU. B Press w e to select
  • JVC HR-XVC33U | Instruction Manual - Page 23
    FI Finnish FJ Fiji FO Faroese FY Frisian GA Irish GD Scots Gaelic GL Galician GN Guarani GU Gujarati HA Hausa HI Hindi HR Croatian HU Hungarian HY Armenian IA Interlingua IE Interlingue IK Inupiak IN Indonesian IS Icelandic IW Hebrew JI Yiddish JW Javanese KA Georgian
  • JVC HR-XVC33U | Instruction Manual - Page 24
    by the Plug&Play setting. Preparations A Turn on the unit. Press POWER (1). B Select the VCR deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the Remote Press VCR so that the VCR indicator lights up. C Access the Main Menu screen. Press SET UP MENU. D Access the
  • JVC HR-XVC33U | Instruction Manual - Page 25
    rt repeatedly until the desired setting is selected. AUTO: Select if you want to adjust your VCR's clock automatically by the incoming signal from the host channel. Be sure to select the correct time zone manually in step D. ON: Adjustment will be made by the built-in clock itself. OFF: Select when
  • JVC HR-XVC33U | Instruction Manual - Page 26
    correctly by the Plug&Play setting. A Turn on the unit. Press POWER (1). B Select the VCR deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the Remote Press VCR so that the VCR indicator lights up. C Access the Main Menu screen. Press SET UP MENU. D Access the Tuner
  • JVC HR-XVC33U | Instruction Manual - Page 27
    you want or delete the channels you do not want manually. A Turn on the unit. Press POWER (1). B Select the VCR deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the Remote Press VCR so that the VCR indicator lights up. C Access the Main Menu screen. Press SET
  • JVC HR-XVC33U | Instruction Manual - Page 28
    The unit's power comes on automatically and the counter is reset to 0:00:00. B Select the VCR deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the Remote Press VCR so that the VCR indicator lights up. C Find the program start point. If the tape is advanced past the
  • JVC HR-XVC33U | Instruction Manual - Page 29
    ● Turn on the TV and select the VCR channel (or AV mode). ● Slide the TV/VCR/DVD switch to the right. ATTENTION In the search playback, some noise may appear on the TV screen. Press CH + or - on the Remote to eliminate the noises. High-Speed (Turbo) Search During playback, press FF (5) for forward
  • JVC HR-XVC33U | Instruction Manual - Page 30
    30 EN OPERATIONS ON VCR DECK (cont.) Index Search Your unit automatically marks index codes at the beginning of each recording. This function gives you quick access to any one
  • JVC HR-XVC33U | Instruction Manual - Page 31
    EN 31 Next Function Memory x The Next Function Memory "tells" the unit what to do after rewinding. Before continuing, make sure the unit is in the Stop mode. a- For Automatic Start Of Playback Press REW (3), then press PLAY (4) within 2 seconds. b- For Automatic Power Off Press REW (3), then
  • JVC HR-XVC33U | Instruction Manual - Page 32
    32 EN OPERATIONS ON VCR DECK (cont.) Manual Tracking Your unit is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the CH buttons. 1 Override automatic tracking. During playback, press SP/EP on the Remote. 2 Adjust the
  • JVC HR-XVC33U | Instruction Manual - Page 33
    The unit's power comes on automatically and the counter is reset to 0:00:00. B Select the VCR deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the Remote Press VCR so that the VCR indicator lights up. C Choose a program. Press CH +/- or the number keys to select the
  • JVC HR-XVC33U | Instruction Manual - Page 34
    ● Turn on the TV and select the VCR channel (or AV mode). ● Slide the TV/VCR/DVD switch to the right. OPERATIONS ON VCR DECK (cont.) Record One Program While Watching Another If your unit is connected to the TV via the AV connection, press TV/VCR. The unit's VCR indicator and the TV broadcast being
  • JVC HR-XVC33U | Instruction Manual - Page 35
    EN 35 Elapsed Recording Time Indication 1 Set the counter display. Press DISPLAY until a counter reading appears on the front display panel. 2 Reset the counter. Press C.RESET before starting recording or playback. ● The counter is reset to "0:00:00" and shows the exact elapsed time as the tape runs
  • JVC HR-XVC33U | Instruction Manual - Page 36
    -record the program from 8:00 to 10:00 on 24th December, on channel 12. A Select the VCR deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the Remote Press VCR so that the VCR indicator lights up. B Access the Program screen. Press PROG.. (If you're just starting out
  • JVC HR-XVC33U | Instruction Manual - Page 37
    F Enter the channel position. Press CH +/-. G Set the tape speed. Press SP/EP. H Return to the normal screen. Press PROG. or OK. "PROGRAM COMPLETED" appears on the TV screen for about 5 seconds, then the normal screen appears. If "PROGRAM NOT COMPLETED PROGRAM OVERLAP" appears on the TV screen, see
  • JVC HR-XVC33U | Instruction Manual - Page 38
    38 EN OPERATIONS ON VCR DECK (cont.) Check, cancel and change programs A Disengage the timer mode. Press TIMER, then press POWER (1). B Access the Program Check screen. Press PROG. CHECK. C Access
  • JVC HR-XVC33U | Instruction Manual - Page 39
    EN 39 To cancel or change a program D Cancel or change a program. Press CANCEL to cancel a program. To change program settings, press the appropriate button: START +/-, STOP +/-, DATE +/-, CH +/-, DAILY (number key "8"), WEEKLY (number key "9") and/or SP/EP. E Return to the normal screen. Press PROG
  • JVC HR-XVC33U | Instruction Manual - Page 40
    40 EN OPERATIONS ON VCR DECK (cont.) When programs overlap each other If "PROGRAM NOT COMPLETED PROGRAM OVERLAP" appears, you have another program overlapping the program you have just made.
  • JVC HR-XVC33U | Instruction Manual - Page 41
    VCR/DVD switch to the right. A Select the VCR deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the Remote Press VCR so that the VCR For timer programing of the DBS receiver, refer to the instruction manual of the DBS receiver. ● Satellite Auto Recording is not
  • JVC HR-XVC33U | Instruction Manual - Page 42
    disc is loaded. Although the VCR deck is selected, the DVD deck is selected automatically if the VCR deck is in stop mode. B Select the DVD deck. On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up. On the Remote Press DVD so that the DVD indicator lights up. C Start playback
  • JVC HR-XVC33U | Instruction Manual - Page 43
    menu ● Turn on the TV and select the VCR channel (or AV mode). ● Slide the TV/VCR/DVD switch to the right. Playback Control (PBC) Function - Locating a desired scene using the menu of the Video CD with PBC Some Video CD discs supports the PBC function. PBC is an abbreviation of "PlayBack Control
  • JVC HR-XVC33U | Instruction Manual - Page 44
    than in 1.5x speed search mode. ● During 1.5x speed search of a DVD VIDEO disc, you can hear the played back audio converted into Linear PCM format pitch and sound quality may change depending on the disc. ● In case of DVD VIDEO discs formatted in DTS format, SVCD or Audio CD discs, playback sound
  • JVC HR-XVC33U | Instruction Manual - Page 45
    ● Each press of FF (5) changes the playback speed as follows: 1/32]1/16]1/4]1/2 ● Each press of REW (3) changes the playback speed as follows (only for DVD VIDEO discs): -1/32]-1/16]-1/4]-1/2 ● To resume normal playback, press PLAY (4). NOTES: ● Reverse slow motion playback is possible only with the
  • JVC HR-XVC33U | Instruction Manual - Page 46
    VIDEO disc recorded in the Dolby Digital format. With other sources, you cannot get any effect if you activate 3D Phonic function. ● When playing back a DVD VIDEO disc recorded with the Dolby Digital that does not contain the rear signal, you cannot get a correct 3D Phonic sound even if you activate
  • JVC HR-XVC33U | Instruction Manual - Page 47
    start from step 1 again. 1 Access the VFP setting menu. Press DVD PICTURE during playback. ● The current setting appears on the TV screen. cannot adjust the parameters of "NORMAL" and "CINEMA". To adjust picture appearance manually 3 Access USER menu. Press w e repeatedly to select "USER 1" or
  • JVC HR-XVC33U | Instruction Manual - Page 48
    (cont.) How to Access the on-screen bar Press PLAY SETUP twice whenever a disc is loaded. Example: During DVD VIDEO playback You can check disc information while the disc is loaded and you can use some functions using the on-screen bar. The on-
  • JVC HR-XVC33U | Instruction Manual - Page 49
    menu item. Press w e to move 0 to , then press OK. ● Each time you press OK, the time information changes as follows; Example: During DVD playback (Back to the beginning) TIME: REM: TOTAL: T. REM: Elapsed playing time of current chapter/track Remaining time of current chapter/track Elapsed
  • JVC HR-XVC33U | Instruction Manual - Page 50
    OK. ● The following pop-up window appears under the selected item. OPERATIONS ON DVD DECK (cont.) C Select the repeat mode. Press rt repeatedly to select the Repeat mode, then press OK. ● The mode changes as follows: DVD VIDEO CHAPTER]TITLE]A-B]OFF](Back to the beginning) CHAPTER: TITLE:
  • JVC HR-XVC33U | Instruction Manual - Page 51
    by specifying the elapsed time from the beginning of the current title (for DVD VIDEO) or the disc (for Audio CD/Video CD) using the Time you have selected a point that excesses the recording time of the disc. ● Some DVD VIDEO discs do not contain time information, and it is no possible to use the
  • JVC HR-XVC33U | Instruction Manual - Page 52
    52 EN OPERATIONS ON DVD DECK (cont.) Chapter Search You can start playback the desired chapter using the on-screen bar. A Access the on-screen bar. Press PLAY SETUP twice.
  • JVC HR-XVC33U | Instruction Manual - Page 53
    Program Playback Random Playback EN 53 You can play back up to 99 tracks in the desired order. A Access the on-screen bar. Press PLAY SETUP twice in stop mode. B Select the menu item. Press w e to move 0 to , then press OK. ● The program table appears under the on-screen bar. You can play
  • JVC HR-XVC33U | Instruction Manual - Page 54
    changes. To clear the on-screen bar Press PLAY SETUP. NOTES: ● For DVD VIDEO Some subtitle languages are abbreviated in the pop-up window. See "Language The following pop-up window appears under the selected item. Example (DVD): "ENGLISH" is selected out of 3 subtitle languages recorded. B Select
  • JVC HR-XVC33U | Instruction Manual - Page 55
    scene angles if the DVD VIDEO disc contains "multi-angle" parts, where multiple cameras were used to shoot the same scene from different angles. If the disc contains "multi-angle" parts, " " appears on the TV screen at the beginning of the "multi-angle" part when "ON SCREEN GUIDE" is set to "ON
  • JVC HR-XVC33U | Instruction Manual - Page 56
    up window appears on the TV screen. Example: "ENGLISH" is selected out of 3 audio languages recorded. Some DVD discs contain the multiple audio. You can select the audio language of movies (DVD VIDEO). ● During playback When using the on-screen bar A Access the on-screen bar. Press PLAY SETUP twice
  • JVC HR-XVC33U | Instruction Manual - Page 57
    Audio Channel Selection When you play certain karaoke (DVD/Video CD/SVCD), you can enjoy karaoke by selecting the audio channel to play. ● The sound of each audio channel depends on the contents of
  • JVC HR-XVC33U | Instruction Manual - Page 58
    set Parental Lock for the first time A Turn on the unit. Press POWER (1). B Select the DVD deck. On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up. On the Remote Press DVD so that the DVD indicator lights up. G Select the Level. Press OK, then press rt repeatedly to move 0 to
  • JVC HR-XVC33U | Instruction Manual - Page 59
    EN 59 H Enter the password. Press the number keys to enter a four-digit number as your password, then press OK. ● The 0 moves to "EXIT". PARENTAL LOCK COUNTRY CODE SET LEVEL PASSWORD EXIT US 4 _ _ _ _ SELECT OK NEW PASSWORD? ••• PRESS 0 ~ 9 KEY TO EXIT, PRESS [SET UP MENU]. I Return to the
  • JVC HR-XVC33U | Instruction Manual - Page 60
    Parental Lock OPERATIONS ON DVD DECK (cont.) AD Bouvet Island BW Botswana BY Belarus BZ Belize CA Canada CC Cocos (Keeling) Islands CF Central African Republic Kong HM Heard Island and McDonald Islands HN Honduras HR Croatia HT Haiti HU Hungary ID Indonesia IE Ireland
  • JVC HR-XVC33U | Instruction Manual - Page 61
    LC Saint Lucia LI Liechtenstein LK Sri Lanka LR Liberia LS Lesotho LT Lithuania LU Luxembourg LV Latvia LY Libyan Arab Jamahiriya MA Morocco MC Monaco MD Moldova, Republic of MG Madagascar MH Marshall Islands ML Mali MM Myanmar MN Mongolia MO Macau MP Northern
  • JVC HR-XVC33U | Instruction Manual - Page 62
    to those discs as MP3 discs in this manual). Operations for MP3 discs are similar to those portion only. This image compression method is used in DVD or Video CD, etc. The audio data has been takes time to start playback. ● The unit does not support "packet writing" discs. ● If there are any Tracks
  • JVC HR-XVC33U | Instruction Manual - Page 63
    . EN 63 Using the MP3 control display A Turn on the unit. Press POWER (1). B Select the DVD deck. On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up. On the Remote Press DVD so that the DVD indicator lights up. C Select the mode. Be sure to set "MP3/JPEG" to "MP3" before
  • JVC HR-XVC33U | Instruction Manual - Page 64
    64 EN OPERATIONS ON DVD DECK (cont.) Repeat Playback You can repeat playback of the current group, track or all groups. ● While MP3 control display is on the TV: A Access
  • JVC HR-XVC33U | Instruction Manual - Page 65
    the JPEG format (we refer to those discs as JPEG discs in this manual). Operations for JPEG discs are similar to those for Audio CD discs, though be played back or it takes time to start playback. ● The unit does not support "packet writing" discs. ● If there are any Files which are stored on a disc
  • JVC HR-XVC33U | Instruction Manual - Page 66
    DECK (cont.) Using the JPEG control display A Turn on the unit. Press POWER (1). B Select the DVD deck. On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up. On the Remote Press DVD so that the DVD indicator lights up. C Select the mode. Be sure to set "MP3/JPEG" to "JPEG" before
  • JVC HR-XVC33U | Instruction Manual - Page 67
    Group/file selection To start slide-show playback by specifying the group/file number A Press TITLE. B Press the number keys (0-10, +10) to enter the group number. C Press the number keys (0-10, +10) to enter the file number. Example: To select 3: Press 3. To select 14: Press +10, then 4. To select
  • JVC HR-XVC33U | Instruction Manual - Page 68
    connect its AUDIO OUT connector to the AUDIO L input connector on your unit. B Select the VCR deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the Remote Press VCR so that the VCR indicator lights up. C Set the unit's input mode. Press AUX (number key "0") and/or CH
  • JVC HR-XVC33U | Instruction Manual - Page 69
    deck. Slide the TV/VCR/DVD switch to the right Remote Press VCR so that the VCR indicator lights up. C Set the input mode of recording deck. With this video unit, press AUX (number key "0") and/or CH to select "F-1". ● When using another recorder as the recording deck, refer to its instruction manual
  • JVC HR-XVC33U | Instruction Manual - Page 70
    on the DVD deck to close the disc tray. B Prepare the VCR deck for dubbing. A Press VCR. B Remote. ● "DUB" lights on the front display panel. E End dubbing. Press STOP (8). ● Be sure to press STOP (8) while the VCR GUIDE" to "OFF" (੬ pg. 81) if you do not want to record the on-screen display for DVD
  • JVC HR-XVC33U | Instruction Manual - Page 71
    DECK) Digital Audio Dubbing ● Turn on the TV and select the VCR channel (or AV mode). ● Slide the TV/VCR/DVD switch to the right. Recorder Digital audio device (MD deck etc.) Optical cable (not supplied) Player Rear of unit DIGITAL AUDIO OUT Note for connection:
  • JVC HR-XVC33U | Instruction Manual - Page 72
    unit to respond to B, C or D code signals. Before performing the following steps: Slide the TV/VCR/DVD switch to the right. REMOTE On the Remote Keep pressing VCR down during steps A - B. A Change the remote control code. Press the number key "1" for A, "2" for B, "3" for C or "4" for D. B Set the
  • JVC HR-XVC33U | Instruction Manual - Page 73
    of your TV set. In addition to JVC TVs, other manufacturer's TVs can also be controlled. Before performing the following steps: ● Turn off the TV using its Remote. ● Slide the TV/VCR/DVD switch to the left. EN 73 A Set the TV brand code. Keep pressing VCR down during step A. Enter your TV's brand
  • JVC HR-XVC33U | Instruction Manual - Page 74
    74 EN REMOTE (cont.) Connecting To A Dolby Digital Decoder or An Amplifier With A Built-in DTS (DVD deck only) These instructions enable you to connect your unit to dolby digital decoder or amplifier with a built-in DTS. DIGITAL AUDIO OUT To DIGITAL AUDIO input Dolby Digital
  • JVC HR-XVC33U | Instruction Manual - Page 75
    mode setting, see pages 76 to 77. A Turn on the unit. Press POWER (1). B Select the VCR deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the Remote Press VCR so that the VCR indicator lights up. C Access the Main Menu screen. Press SET UP MENU. D Access the Function
  • JVC HR-XVC33U | Instruction Manual - Page 76
    tape if you set "AUTO SP]EP TIMER" to "ON". In this case, make sure the mode is not engaged, then set the tape speed manually during timer programing. ● In order to ensure that the recording fits on the tape, this feature may leave a slight nonrecorded section at the end of
  • JVC HR-XVC33U | Instruction Manual - Page 77
    playing back a monaural tape, sounds on the normal track will be heard regardless of this setting. ● You can also use the A.MONITOR button on the Remote to select the desired monitor sound. (੬ pg. 32) When this function is set to "3H", the unit is turned off automatically if no operation is
  • JVC HR-XVC33U | Instruction Manual - Page 78
    LEVEL (੬ pg. 80) OTHERS RESUME (੬ pg. 81) ON SCREEN GUIDE (੬ pg. 81) PARENTAL LOCK (੬ pg. 58) SUBSIDIARY SETTINGS (cont.) ● The procedure DVD deck. On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up. On the Remote Press DVD so that the DVD indicator lights up. C Access the DVD
  • JVC HR-XVC33U | Instruction Manual - Page 79
    are recorded on a disc. MP3: JPEG: Select this to play back MP3 files. Select this to play back JPEG files. NOTE: You cannot access the DVD Set Up screen and "X" appears on the TV screen if a disc is already placed. * The default setting is bold in the table below. Set to
  • JVC HR-XVC33U | Instruction Manual - Page 80
    the loudest sound and the quietest one) can be compressed during playback of a program encoded in Dolby Digital format. This function takes effect when a DVD VIDEO disc recorded in Dolby Digital format is played back at low or middle volume. WIDE RANGE: Select this to inactivate this function when
  • JVC HR-XVC33U | Instruction Manual - Page 81
    unit is not equipped with the DTS decoding function. ● When you play back a DVD VIDEO or Audio CD disc with DTS, use a DTS decoder to get correct signals is bold in the table below. 8 RESUME ON OFF DISC RESUME 8 ON SCREEN GUIDE ON OFF When this function is set to "ON", you can use the resume
  • JVC HR-XVC33U | Instruction Manual - Page 82
    use, keep the Remote out of the children's reach. ● Timer recording programs will be performed even if the child lock function activated. (DVD deck) ● Turn on the TV and select the VCR channel (or AV mode). ● Slide the TV/VCR/DVD switch to the right. This unit supports the progressive scan system
  • JVC HR-XVC33U | Instruction Manual - Page 83
    TROUBLESHOOTING EN 83 Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your unit off for repair. POWER SYMPTOM 1. No power is supplied to the unit. 2.
  • JVC HR-XVC33U | Instruction Manual - Page 84
    84 EN TROUBLESHOOTING (cont.) PLAYBACK (DVD deck) SYMPTOM 1. The button do not work. 2. The DVD deck can not be operated. 3. . CORRECTIVE ACTION - On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up. On the Remote Press DVD so that the DVD indicator lights up. - Use the discs
  • JVC HR-XVC33U | Instruction Manual - Page 85
    play MP3 files. (੬ pg. 79) Replace the disc. (੬ pg. 9) JPEG Playback (DVD deck) SYMPTOM 1. A disc cannot be played. POSSIBLE CAUSE ● No JPEG files are to "JPEG" to play JPEG files. (੬ pg. 79) RECORDING (VCR deck) SYMPTOM 1. Recording cannot be started. 2. TV broadcasts cannot be recorded
  • JVC HR-XVC33U | Instruction Manual - Page 86
    86 EN TROUBLESHOOTING (cont.) TIMER RECORDING (VCR deck) SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1. Timer recording won't work. ● The clock and/or the timer have been set incorrectly. Re-perform the clock and/
  • JVC HR-XVC33U | Instruction Manual - Page 87
    PROBLEMS SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1. The image of TV broadcast appears distorted on the TV screen. ● The unit leaves turned on and the DVD deck is selected. Turn off the unit, or press VCR to select the VCR deck, then press TV/VCR so that the VCR or perform "Manual Clock Set"
  • JVC HR-XVC33U | Instruction Manual - Page 88
    search to normal playback, the picture is disturbed. Should I be concerned about this? A. No, it is normal. Q. Noise bar appear during search. What's the problem? A. This is normal. Q. Sometimes, during Index Search, the unit can't find the program I want to see. Why not? A. There may be index codes
  • JVC HR-XVC33U | Instruction Manual - Page 89
    630 min. with ST-210 video cassette VIDEO/AUDIO (VCR deck) Signal system : NTSC colour signal and EIA Provided accessories : RF cable, Infrared remote control unit, "AA" battery x DVD deck) Signal system : NTSC Applicable disc : DVD (12 cm, 8 cm) CD (12 cm, 8 cm) Audio characteristics DVD
  • JVC HR-XVC33U | Instruction Manual - Page 90
    deck only 22 On-screen Language Set (DVD deck 21 On-screen Language Set (VCR deck 20 Letter Box 19 Locating the start point of the item or skip the item .... 44 M Manual Channel Set 27 Manual Clock Set 25 Manual Tracking 32 Mode Set (DVD deck) ANALOG DOWN MIX 80 AUDIO LANGUAGE 22 D. RANGE
  • JVC HR-XVC33U | Instruction Manual - Page 91
    temporarily release the Parental Lock 59 Playback (DVD deck 42 - 53 Playback (JPEG 66 - 67 Playback (MP3 63 - 64 Playback (VCR deck 28 - 32 Playback Control ( 7 Remote Control Functions 72 Repeat Playback 31, 50, 64, 67 Resume Function 45 S Satellite Auto Recording 41 Scan Mode Set (DVD deck
  • JVC HR-XVC33U | Instruction Manual - Page 92
    (Only in U.S.A.) HOW TO LOCATE YOUR JVC SERVICE CENTER TOLL FREE: 1-800-537-5722 http://www.jvc.com Dear Customer, In order to receive the most satisfaction from your purchase, please read the instruction booklet before operating the unit. In the event that repair is necessary, or for the
  • JVC HR-XVC33U | Instruction Manual - Page 93
    bill of sale plus a letter of explanation of the problem to the nearest JVC Factory Service Center, the name and location of which will be Manual, normal maintenance, video and audio head cleaning; 4. Damage that occurs in shipment, due to act of God, and cosmetic damage; 5. Signal reception problems
  • JVC HR-XVC33U | Instruction Manual - Page 94
    94 EN MEMO
  • JVC HR-XVC33U | Instruction Manual - Page 95
    EN 95
  • JVC HR-XVC33U | Instruction Manual - Page 96
    HR-XVC33U EN Printed in Beijing 0803-TY-ID-BJ
  • JVC HR-XVC33U | Instruction Manual - Page 97
    DVD PLAYER & VIDEO CASSETTE RECORDER HR-XVS44U INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located on the rear of cabinet. Retain this information for future reference. Model No. Serial No. LPT0856-001B
  • JVC HR-XVC33U | Instruction Manual - Page 98
    you for purchasing the JVC DVD player & S-VHS the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: Declaration of Conformity Model Number: HR-XVS44U Trade Name: JVC Responsible Party: JVC Americas Corp. Address: 1700
  • JVC HR-XVC33U | Instruction Manual - Page 99
    marked with the following. DVD (8 cm /12 cm disc top and at the rear.) When discarding batteries, environmental problems must be considered and the local rules or laws governing heed the following precautions may result in damage to the unit, Remote or video cassette. 1. DO NOT place the unit - -
  • JVC HR-XVC33U | Instruction Manual - Page 100
    servicing. ATTENTION Follow and obey all warnings and instructions marked on your product and its operating instructions. For your safety, please read all the safety and operating instructions with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an
  • JVC HR-XVC33U | Instruction Manual - Page 101
    or other hazards. 4. Safety Check Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in safe operating condition. HOW TO USE THIS INSTRUCTION MANUAL ● All major sections and subsections are listed in the
  • JVC HR-XVC33U | Instruction Manual - Page 102
    With A Built-in DTS (DVD deck only 74 SUBSIDIARY SETTINGS 75 Mode Set (VCR deck 75 Mode Set (DVD deck 80 Child Lock 84 Scan Mode Set (DVD deck 84 TROUBLESHOOTING 85 QUESTIONS AND ANSWERS 90 SPECIFICATIONS 91 LIST OF TERMS 92 FOR SERVICING (Only in U.S.A.) 94 WARRANTY (Only
  • JVC HR-XVC33U | Instruction Manual - Page 103
    region number includes "1" can be played back such as shown below. Examples of DVD VIDEO labels which can be played back using this unit. Marks of discs in this instruction manual Allows operation with a DVD VIDEO disc. Allows operation with a Video CD disc. Allows operation with a disc including
  • JVC HR-XVC33U | Instruction Manual - Page 104
    , that in some cases a disc may not include a mark even for a function it supports. Marks related to video Mark Description Number of subtitles DISC INFORMATION (cont.) File Structure of Discs DVD VIDEO Typically, DVD VIDEO discs are made up of larger units called "titles". Each title has
  • JVC HR-XVC33U | Instruction Manual - Page 105
    Placing a Disc 1 Open the disc tray. Press OPEN/CLOSE (x) on the DVD deck to open the disc tray. x ● Pressing the button again closes the disc tray. ● Do not block the disc tray with your hand while it
  • JVC HR-XVC33U | Instruction Manual - Page 106
    INDEX A Power Button (POWER (1)) ੬ pg. 18 B VCR Indicator ੬ pg. 28, 32 C VHS Cassette Loading Slot D VCR/DVD Button ੬ pg. 28, 32, 42 E Disc Tray F Stop Button (STOP (8)) ੬ pg. 28, 32, 42 G DVD Indicator ੬ pg. 42 H Play Button (PLAY (4)) ੬ pg. 28, 42 I DVD Open/Close Button (OPEN/CLOSE (x)) ੬ pg. 42
  • JVC HR-XVC33U | Instruction Manual - Page 107
    deck only) ੬ pg. 37 C Satellite Auto Recording Indicator (N) (VCR deck only) ੬ pg. 41 D Channel/Clock Mode Display (F-1 or L-1) (VCR deck only) Counter Display (VCR deck) Tape Speed (SP/EP) (VCR deck only) Multi-information window* (DVD deck) * The current group/title/track/chapter number(s), time
  • JVC HR-XVC33U | Instruction Manual - Page 108
    12 EN INDEX (cont.) ON-SCREEN DISPLAY (VCR deck) If you press DISPLAY on the Remote when "SUPERIMPOSE" is set to "ON" (੬ pg. 77), various operational indicators appear on the TV screen. For On-screen display for DVD deck, refer to "Using the on-screen bar" (੬ pg. 48). A Operation Mode Indicators
  • JVC HR-XVC33U | Instruction Manual - Page 109
    Button (DVD PICTURE) ੬ pg. 47 How To Use Before use, insert two AA size batteries into the Remote with the polarity ( and ) matched correctly as indicated on the battery compartment or on the lid. The Remote can operate most of your unit's functions, as well as basic functions of TV sets of JVC and
  • JVC HR-XVC33U | Instruction Manual - Page 110
    the instruction manual of your television. ● To obtain high-quality pictures, you can also use the S-VIDEO connection or Component Video Connection (DVD deck only the unit is turned on, then press VCR/ DVD on the unit or VCR on the Remote so that the VCR indicator lights up. A Press POWER (1) to
  • JVC HR-XVC33U | Instruction Manual - Page 111
    ● Make sure the unit is turned on, then press VCR/ DVD on the unit or VCR on the Remote so that the VCR indicator lights up. A Press POWER (1) to turn off TV/VCR button on the unit's Remote to set your TV to the AV mode. (੬ pg. 73) ● For switching the TV's mode, refer to the instruction manual of
  • JVC HR-XVC33U | Instruction Manual - Page 112
    ● Make sure the unit is turned on, then press VCR/ DVD on the unit or VCR on the Remote so that the VCR indicator lights up. A Press POWER (1) to turn off TV/VCR button on the unit's Remote to set your TV to the AV mode. (੬ pg. 73) ● For switching the TV's mode, refer to the instruction manual of
  • JVC HR-XVC33U | Instruction Manual - Page 113
    channel from an adjacent time zone, or an incorrect PBS channel from a cable TV system. In this case, perform "Semiauto Clock Set" (੬ pg. 25) or "Manual Clock Set" (੬ pg. 25). ● If "- -:- -" appears on the front display panel, your antenna cable may not be connected to the unit or there may not
  • JVC HR-XVC33U | Instruction Manual - Page 114
    INITIAL SETTINGS (cont.) A Turn on the unit. Press POWER (1). B Select the DVD deck. On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up. On the Remote Press DVD so that the DVD indicator lights up. C Access the DVD Set Up menu screen. A Press SET UP MENU. B Press w e to
  • JVC HR-XVC33U | Instruction Manual - Page 115
    appear; however, the left and right edges of the pictures will not be shown on the screen. EN 19 Pan&Scan/Letter Box In general, DVD VIDEO disc are produced for a wide-screen TV with 16:9 aspect ratio. Material with this ratio will not fit to a TV with 4:3 aspect ratio. There
  • JVC HR-XVC33U | Instruction Manual - Page 116
    -screen messages in 3 different languages. A Turn on the unit. Press POWER (1). B Select the VCR deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the Remote Press VCR so that the VCR indicator lights up. C Access the Main Menu screen. Press SET UP MENU. D Access the
  • JVC HR-XVC33U | Instruction Manual - Page 117
    can change the language setting manually as required. A Turn on the unit. Press POWER (1). B Select the DVD deck. On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up. On the Remote Press DVD so that the DVD indicator lights up. C Access the DVD Set Up menu screen. A Press
  • JVC HR-XVC33U | Instruction Manual - Page 118
    as an example. A Turn on the unit. Press POWER (1). B Select the DVD deck. On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up. On the Remote Press DVD so that the DVD indicator lights up. C Access the DVD Set Up menu screen. A Press SET UP MENU. B Press w e to select
  • JVC HR-XVC33U | Instruction Manual - Page 119
    FI Finnish FJ Fiji FO Faroese FY Frisian GA Irish GD Scots Gaelic GL Galician GN Guarani GU Gujarati HA Hausa HI Hindi HR Croatian HU Hungarian HY Armenian IA Interlingua IE Interlingue IK Inupiak IN Indonesian IS Icelandic IW Hebrew JI Yiddish JW Javanese KA Georgian
  • JVC HR-XVC33U | Instruction Manual - Page 120
    by the Plug&Play setting. Preparations A Turn on the unit. Press POWER (1). B Select the VCR deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the Remote Press VCR so that the VCR indicator lights up. C Access the Main Menu screen. Press SET UP MENU. D Access the
  • JVC HR-XVC33U | Instruction Manual - Page 121
    rt repeatedly until the desired setting is selected. AUTO: Select if you want to adjust your VCR's clock automatically by the incoming signal from the host channel. Be sure to select the correct time zone manually in step D. ON: Adjustment will be made by the built-in clock itself. OFF: Select when
  • JVC HR-XVC33U | Instruction Manual - Page 122
    correctly by the Plug&Play setting. A Turn on the unit. Press POWER (1). B Select the VCR deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the Remote Press VCR so that the VCR indicator lights up. C Access the Main Menu screen. Press SET UP MENU. D Access the Tuner
  • JVC HR-XVC33U | Instruction Manual - Page 123
    you want or delete the channels you do not want manually. A Turn on the unit. Press POWER (1). B Select the VCR deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the Remote Press VCR so that the VCR indicator lights up. C Access the Main Menu screen. Press SET
  • JVC HR-XVC33U | Instruction Manual - Page 124
    The unit's power comes on automatically and the counter is reset to 0:00:00. B Select the VCR deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the Remote Press VCR so that the VCR indicator lights up. C Find the program start point. If the tape is advanced past the
  • JVC HR-XVC33U | Instruction Manual - Page 125
    ● Turn on the TV and select the VCR channel (or AV mode). ● Slide the TV/VCR/DVD switch to the right. ATTENTION In the playback, some noise may appear on the TV screen. Press CH + or - on the Remote to eliminate the noises. Variable Speed Search During playback, press FF (5) for forward variable
  • JVC HR-XVC33U | Instruction Manual - Page 126
    30 EN OPERATIONS ON VCR DECK (cont.) Index Search x Your unit automatically marks index codes at the beginning of each recording. This function gives you quick access to any one
  • JVC HR-XVC33U | Instruction Manual - Page 127
    REW (3), FF (5) or PAUSE (9) also stops Repeat Playback. EN 31 Manual Tracking Your unit is equipped with automatic tracking control. During playback, you . During playback, press SP/EP on the Remote. 2 Adjust the tracking manually. Press CH + or - on the Remote. ● Press SP/EP again to return to
  • JVC HR-XVC33U | Instruction Manual - Page 128
    The unit's power comes on automatically and the counter is reset to 0:00:00. B Select the VCR deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the Remote Press VCR so that the VCR indicator lights up. C Choose a program. Press CH +/- or the number keys to select the
  • JVC HR-XVC33U | Instruction Manual - Page 129
    ● Turn on the TV and select the VCR channel (or AV mode). ● Slide the TV/VCR/DVD switch to the right. EN 33 Record One Program While Watching Another If your unit is connected to the TV via the AV connection, press TV/VCR. The unit's VCR indicator on the front display panel and the
  • JVC HR-XVC33U | Instruction Manual - Page 130
    34 EN OPERATIONS ON VCR DECK (cont.) Elapsed Recording Time Indication 1 Set the counter display. Press DISPLAY until a counter reading appears on the front display panel. 2 Reset the counter. Press C.
  • JVC HR-XVC33U | Instruction Manual - Page 131
    during playback as well. ● When watching a rental tape or one recorded on another VCR, or when using this unit as the player for editing, set VIDEO CALIBRATION to a delay of approximately 7 seconds after REC (7) and PLAY (4) on the Remote are pressed, or REC (7) on the unit is pressed. To make sure
  • JVC HR-XVC33U | Instruction Manual - Page 132
    -record the program from 8:00 to 10:00 on 24th December, on channel 12. A Select the VCR deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the Remote Press VCR so that the VCR indicator lights up. B Access the Program screen. Press PROG.. (If you're just starting out
  • JVC HR-XVC33U | Instruction Manual - Page 133
    F Enter the channel position. Press CH +/-. G Set the tape speed. Press SP/EP. H Return to the normal screen. Press PROG. or OK. "PROGRAM COMPLETED" appears on the TV screen for about 5 seconds, then the normal screen appears. If "PROGRAM NOT COMPLETED PROGRAM OVERLAP" appears on the TV screen, see
  • JVC HR-XVC33U | Instruction Manual - Page 134
    38 EN OPERATIONS ON VCR DECK (cont.) Check, cancel and change programs A Disengage the timer mode. Press TIMER, then press POWER (1). B Access the Program Check screen. Press PROG. CHECK. C Access
  • JVC HR-XVC33U | Instruction Manual - Page 135
    EN 39 To cancel or change a program D Cancel or change a program. Press CANCEL to cancel a program. To change program settings, press the appropriate button: START +/-, STOP +/-, DATE +/-, CH +/-, DAILY (number key "8"), WEEKLY (number key "9") and/or SP/EP. E Return to the normal screen. Press PROG
  • JVC HR-XVC33U | Instruction Manual - Page 136
    40 EN OPERATIONS ON VCR DECK (cont.) When programs overlap each other If "PROGRAM NOT COMPLETED PROGRAM OVERLAP" appears, you have another program overlapping the program you have just made.
  • JVC HR-XVC33U | Instruction Manual - Page 137
    VCR/DVD switch to the right. A Select the VCR deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the Remote Press VCR so that the VCR For timer programing of the DBS receiver, refer to the instruction manual of the DBS receiver. ● Satellite Auto Recording is not
  • JVC HR-XVC33U | Instruction Manual - Page 138
    disc is loaded. Although the VCR deck is selected, the DVD deck is selected automatically if the VCR deck is in stop mode. B Select the DVD deck. On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up. On the Remote Press DVD so that the DVD indicator lights up. C Start playback
  • JVC HR-XVC33U | Instruction Manual - Page 139
    menu ● Turn on the TV and select the VCR channel (or AV mode). ● Slide the TV/VCR/DVD switch to the right. Playback Control (PBC) Function - Locating a desired scene using the menu of the Video CD with PBC Some Video CD discs supports the PBC function. PBC is an abbreviation of "PlayBack Control
  • JVC HR-XVC33U | Instruction Manual - Page 140
    than in 1.5x speed search mode. ● During 1.5x speed search of a DVD VIDEO disc, you can hear the played back audio converted into Linear PCM format pitch and sound quality may change depending on the disc. ● In case of DVD VIDEO discs formatted in DTS format, SVCD or Audio CD discs, playback sound
  • JVC HR-XVC33U | Instruction Manual - Page 141
    ● Each press of FF (5) changes the playback speed as follows: 1/32]1/16]1/4]1/2 ● Each press of REW (3) changes the playback speed as follows (only for DVD VIDEO discs): -1/32]-1/16]-1/4]-1/2 ● To resume normal playback, press PLAY (4). NOTES: ● Reverse slow motion playback is possible only with the
  • JVC HR-XVC33U | Instruction Manual - Page 142
    VIDEO disc recorded in the Dolby Digital format. With other sources, you cannot get any effect if you activate 3D Phonic function. ● When playing back a DVD VIDEO disc recorded with the Dolby Digital that does not contain the rear signal, you cannot get a correct 3D Phonic sound even if you activate
  • JVC HR-XVC33U | Instruction Manual - Page 143
    start from step 1 again. 1 Access the VFP setting menu. Press DVD PICTURE during playback. ● The current setting appears on the TV screen. cannot adjust the parameters of "NORMAL" and "CINEMA". To adjust picture appearance manually 3 Access USER menu. Press w e repeatedly to select "USER 1" or
  • JVC HR-XVC33U | Instruction Manual - Page 144
    (cont.) How to Access the on-screen bar Press PLAY SETUP twice whenever a disc is loaded. Example: During DVD VIDEO playback You can check disc information while the disc is loaded and you can use some functions using the on-screen bar. The on-
  • JVC HR-XVC33U | Instruction Manual - Page 145
    menu item. Press w e to move 0 to , then press OK. ● Each time you press OK, the time information changes as follows; Example: During DVD playback (Back to the beginning) TIME: REM: TOTAL: T. REM: Elapsed playing time of current chapter/track Remaining time of current chapter/track Elapsed
  • JVC HR-XVC33U | Instruction Manual - Page 146
    OK. ● The following pop-up window appears under the selected item. OPERATIONS ON DVD DECK (cont.) C Select the repeat mode. Press rt repeatedly to select the Repeat mode, then press OK. ● The mode changes as follows: DVD VIDEO CHAPTER]TITLE]A-B]OFF](Back to the beginning) CHAPTER: TITLE:
  • JVC HR-XVC33U | Instruction Manual - Page 147
    by specifying the elapsed time from the beginning of the current title (for DVD VIDEO) or the disc (for Audio CD/Video CD) using the Time you have selected a point that excesses the recording time of the disc. ● Some DVD VIDEO discs do not contain time information, and it is no possible to use the
  • JVC HR-XVC33U | Instruction Manual - Page 148
    52 EN OPERATIONS ON DVD DECK (cont.) Chapter Search You can start playback the desired chapter using the on-screen bar. A Access the on-screen bar. Press PLAY SETUP twice.
  • JVC HR-XVC33U | Instruction Manual - Page 149
    Program Playback Random Playback EN 53 You can play back up to 99 tracks in the desired order. A Access the on-screen bar. Press PLAY SETUP twice in stop mode. B Select the menu item. Press w e to move 0 to , then press OK. ● The program table appears under the on-screen bar. You can play
  • JVC HR-XVC33U | Instruction Manual - Page 150
    changes. To clear the on-screen bar Press PLAY SETUP. NOTES: ● For DVD VIDEO Some subtitle languages are abbreviated in the pop-up window. See "Language The following pop-up window appears under the selected item. Example (DVD): "ENGLISH" is selected out of 3 subtitle languages recorded. B Select
  • JVC HR-XVC33U | Instruction Manual - Page 151
    scene angles if the DVD VIDEO disc contains "multi-angle" parts, where multiple cameras were used to shoot the same scene from different angles. If the disc contains "multi-angle" parts, " " appears on the TV screen at the beginning of the "multi-angle" part when "ON SCREEN GUIDE" is set to "ON
  • JVC HR-XVC33U | Instruction Manual - Page 152
    up window appears on the TV screen. Example: "ENGLISH" is selected out of 3 audio languages recorded. Some DVD discs contain the multiple audio. You can select the audio language of movies (DVD VIDEO). ● During playback When using the on-screen bar A Access the on-screen bar. Press PLAY SETUP twice
  • JVC HR-XVC33U | Instruction Manual - Page 153
    Audio Channel Selection When you play certain karaoke (DVD/Video CD/SVCD), you can enjoy karaoke by selecting the audio channel to play. ● The sound of each audio channel depends on the contents of
  • JVC HR-XVC33U | Instruction Manual - Page 154
    set Parental Lock for the first time A Turn on the unit. Press POWER (1). B Select the DVD deck. On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up. On the Remote Press DVD so that the DVD indicator lights up. G Select the Level. Press OK, then press rt repeatedly to move 0 to
  • JVC HR-XVC33U | Instruction Manual - Page 155
    EN 59 H Enter the password. Press the number keys to enter a four-digit number as your password, then press OK. ● The 0 moves to "EXIT". PARENTAL LOCK COUNTRY CODE SET LEVEL PASSWORD EXIT US 4 _ _ _ _ SELECT OK NEW PASSWORD? ••• PRESS 0 ~ 9 KEY TO EXIT, PRESS [SET UP MENU]. I Return to the
  • JVC HR-XVC33U | Instruction Manual - Page 156
    Parental Lock OPERATIONS ON DVD DECK (cont.) AD Bouvet Island BW Botswana BY Belarus BZ Belize CA Canada CC Cocos (Keeling) Islands CF Central African Republic Kong HM Heard Island and McDonald Islands HN Honduras HR Croatia HT Haiti HU Hungary ID Indonesia IE Ireland
  • JVC HR-XVC33U | Instruction Manual - Page 157
    LC Saint Lucia LI Liechtenstein LK Sri Lanka LR Liberia LS Lesotho LT Lithuania LU Luxembourg LV Latvia LY Libyan Arab Jamahiriya MA Morocco MC Monaco MD Moldova, Republic of MG Madagascar MH Marshall Islands ML Mali MM Myanmar MN Mongolia MO Macau MP Northern
  • JVC HR-XVC33U | Instruction Manual - Page 158
    those discs as MP3/WMA discs in this manual). Operations for MP3/WMA discs are similar which usually belongs to a Group (folder). OPERATIONS ON DVD DECK (cont.) NOTES: ● Because of the disc time to start playback. ● The unit does not support "packet writing" discs. ● If there are any Tracks
  • JVC HR-XVC33U | Instruction Manual - Page 159
    . EN 63 Using the MP3/WMA control display A Turn on the unit. Press POWER (1). B Select the DVD deck. On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up. On the Remote Press DVD so that the DVD indicator lights up. C Select the mode. Be sure to set "MP3&WMA/JPEG" to "MP3&WMA
  • JVC HR-XVC33U | Instruction Manual - Page 160
    64 EN OPERATIONS ON DVD DECK (cont.) Repeat Playback You can repeat playback of the current group, track or all groups. ● While MP3/WMA control display is on the TV: A
  • JVC HR-XVC33U | Instruction Manual - Page 161
    the JPEG format (we refer to those discs as JPEG discs in this manual). Operations for JPEG discs are similar to those for Audio CD discs, though be played back or it takes time to start playback. ● The unit does not support "packet writing" discs. ● If there are any Files which are stored on a disc
  • JVC HR-XVC33U | Instruction Manual - Page 162
    (cont.) Using the JPEG control display A Turn on the unit. Press POWER (1). B Select the DVD deck. On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up. On the Remote Press DVD so that the DVD indicator lights up. C Select the mode. Be sure to set "MP3&WMA/JPEG" to "JPEG" before
  • JVC HR-XVC33U | Instruction Manual - Page 163
    Group/file selection To start slide-show playback by specifying the group/file number A Press TITLE. B Press the number keys (0-10, +10) to enter the group number. C Press the number keys (0-10, +10) to enter the file number. Example: To select 3: Press 3. To select 14: Press +10, then 4. To select
  • JVC HR-XVC33U | Instruction Manual - Page 164
    connect its AUDIO OUT connector to the AUDIO L input connector on your unit. B Select the VCR deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the Remote Press VCR so that the VCR indicator lights up. C Set the unit's input mode. Press AUX (number key "0") and/or CH
  • JVC HR-XVC33U | Instruction Manual - Page 165
    the VCR deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the Remote Press VCR so that the VCR indicator pg. 79) ● When using another recorder as the recording deck, refer to its instruction manual. D Set the edit mode. See "PICTURE CONTROL" on page 76. E Engage
  • JVC HR-XVC33U | Instruction Manual - Page 166
    on the DVD deck to close the disc tray. B Prepare the VCR deck for dubbing. A Press VCR. B Remote. ● "DUB" lights on the front display panel. E End dubbing. Press STOP (8). ● Be sure to press STOP (8) while the VCR GUIDE" to "OFF" (੬ pg. 83) if you do not want to record the on-screen display for DVD
  • JVC HR-XVC33U | Instruction Manual - Page 167
    DECK) Digital Audio Dubbing ● Turn on the TV and select the VCR channel (or AV mode). ● Slide the TV/VCR/DVD switch to the right. Recorder Digital audio device (MD deck etc.) Optical cable (not supplied) Player Rear of unit DIGITAL AUDIO OUT Note for connection:
  • JVC HR-XVC33U | Instruction Manual - Page 168
    unit to respond to B, C or D code signals. Before performing the following steps: Slide the TV/VCR/DVD switch to the right. REMOTE On the Remote Keep pressing VCR down during steps A - B. A Change the remote control code. Press the number key "1" for A, "2" for B, "3" for C or "4" for D. B Set the
  • JVC HR-XVC33U | Instruction Manual - Page 169
    of your TV set. In addition to JVC TVs, other manufacturer's TVs can also be controlled. Before performing the following steps: ● Turn off the TV using its Remote. ● Slide the TV/VCR/DVD switch to the left. EN 73 A Set the TV brand code. Keep pressing VCR down during step A. Enter your TV's brand
  • JVC HR-XVC33U | Instruction Manual - Page 170
    74 EN REMOTE (cont.) Connecting To A Dolby Digital Decoder or An Amplifier With A Built-in DTS (DVD deck only) These instructions enable you to connect your unit to dolby digital decoder or amplifier with a built-in DTS. DIGITAL AUDIO OUT To DIGITAL AUDIO input Dolby Digital
  • JVC HR-XVC33U | Instruction Manual - Page 171
    mode setting, see pages 76 to 79. A Turn on the unit. Press POWER (1). B Select the VCR deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the Remote Press VCR so that the VCR indicator lights up. C Access the Main Menu screen. Press SET UP MENU. D Access the Function
  • JVC HR-XVC33U | Instruction Manual - Page 172
    76 EN 8 S-VHS ET ON OFF 8 VIDEO CALIBRATION ON OFF 8 PICTURE CONTROL AUTO EDIT SOFT SHARP SUBSIDIARY SETTINGS (cont.) * The default setting is bold in the table below. You can record in SP mode on VHS cassettes with S-VHS picture quality. You can play back a tape recorded using the S-VHS ET
  • JVC HR-XVC33U | Instruction Manual - Page 173
    tape if you set "AUTO SP]EP TIMER" to "ON". In this case, make sure the mode is not engaged, then set the tape speed manually during timer programing. ● In order to ensure that the recording fits on the tape, this feature may leave a slight nonrecorded section at the end of
  • JVC HR-XVC33U | Instruction Manual - Page 174
    playing back a monaural tape, sounds on the normal track will be heard regardless of this setting. ● You can also use the A.MONITOR button on the Remote to select the desired monitor sound. (੬ pg. 31)
  • JVC HR-XVC33U | Instruction Manual - Page 175
    8 S-VHS MODE ON OFF 8 FRONT AUX INPUT VIDEO S-VIDEO 8 REAR AUX INPUT VIDEO S-VIDEO 8 AUTO POWER OFF 3H OFF EN 79 * The default setting is bold in the table below. Your unit can record in S-VHS (Super VHS), S-VHS ET or VHS. ● To record in S-VHS: Set "S-VHS MODE" to "ON". Then, insert a cassette
  • JVC HR-XVC33U | Instruction Manual - Page 176
    LEVEL (੬ pg. 82) OTHERS RESUME (੬ pg. 83) ON SCREEN GUIDE (੬ pg. 83) PARENTAL LOCK (੬ pg. 58) SUBSIDIARY SETTINGS (cont.) ● The procedure DVD deck. On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up. On the Remote Press DVD so that the DVD indicator lights up. C Access the DVD
  • JVC HR-XVC33U | Instruction Manual - Page 177
    on a disc. MP3&WMA: Select this to play back MP3/WMA files. JPEG: Select this to play back JPEG files. NOTE: You cannot access the DVD Set Up screen and "X" appears on the TV screen if a disc is already placed. * The default setting is bold in the table below. Set to
  • JVC HR-XVC33U | Instruction Manual - Page 178
    the loudest sound and the quietest one) can be compressed during playback of a program encoded in Dolby Digital format. This function takes effect when a DVD VIDEO disc recorded in Dolby Digital format is played back at low or middle volume. WIDE RANGE: Select this to inactivate this function when
  • JVC HR-XVC33U | Instruction Manual - Page 179
    unit is not equipped with the DTS decoding function. ● When you play back a DVD VIDEO or Audio CD disc with DTS, use a DTS decoder to get correct signals is bold in the table below. 8 RESUME ON OFF DISC RESUME 8 ON SCREEN GUIDE ON OFF When this function is set to "ON", you can use the resume
  • JVC HR-XVC33U | Instruction Manual - Page 180
    use, keep the Remote out of the children's reach. ● Timer recording programs will be performed even if the child lock function activated. (DVD deck) ● Turn on the TV and select the VCR channel (or AV mode). ● Slide the TV/VCR/DVD switch to the right. This unit supports the progressive scan system
  • JVC HR-XVC33U | Instruction Manual - Page 181
    TROUBLESHOOTING EN 85 Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble VCR/DVD repeatedly so that the VCR indicator lights up. On the Remote Press VCR so that the VCR
  • JVC HR-XVC33U | Instruction Manual - Page 182
    DVD deck) TROUBLESHOOTING (cont.) SYMPTOM 1. The button do not work. 2. The DVD deck can not be operated. POSSIBLE CAUSE ● The operation is prohibited on the placed disc. ● The DVD unit Press VCR/DVD repeatedly so that the DVD indicator lights up. On the Remote Press DVD so that the DVD indicator
  • JVC HR-XVC33U | Instruction Manual - Page 183
    , or the disc is an unplayable disc (such as CD-ROM). JPEG Playback (DVD deck) When both MP3/WMA files and JPEG files are recorded to a disc, WMA/ JPEG" to "JPEG" to play JPEG files. (੬ pg. 81) RECORDING (VCR deck) SYMPTOM 1. Recording cannot be started. 2. TV broadcasts cannot be recorded. 3.
  • JVC HR-XVC33U | Instruction Manual - Page 184
    88 EN TROUBLESHOOTING (cont.) TIMER RECORDING (VCR deck) SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1. Timer recording won't work. ● The clock and/or the timer have been set Re-perform the clock and/or
  • JVC HR-XVC33U | Instruction Manual - Page 185
    PROBLEMS SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1. The image of TV broadcast appears distorted on the TV screen. ● The unit leaves turned on and the DVD deck is selected. Turn off the unit, or press VCR to select the VCR deck, then press TV/VCR so that the VCR or perform "Manual Clock Set"
  • JVC HR-XVC33U | Instruction Manual - Page 186
    search to normal playback, the picture is disturbed. Should I be concerned about this? A. No, it is normal. Q. Noise bar appear during search. What's the problem? A. This is normal. Q. Sometimes, during Index Search, the unit can't find the program I want to see. Why not? A. There may be index codes
  • JVC HR-XVC33U | Instruction Manual - Page 187
    630 min. with ST-210 video cassette VIDEO/AUDIO (VCR deck) Signal system : NTSC colour signal and EIA cable, S-Video cable (4-pin) Infrared remote control unit, "AA" battery x (DVD deck) Signal system : NTSC Applicable disc : DVD (12 cm, 8 cm) CD (12 cm, 8 cm) Audio characteristics DVD
  • JVC HR-XVC33U | Instruction Manual - Page 188
    deck only 22 On-screen Language Set (DVD deck 21 On-screen Language Set (VCR deck 20 Letter Box 19 Locating the start point of the item or skip the item .... 44 M Manual Channel Set 27 Manual Clock Set 25 Manual Tracking 31 Mode Set (DVD deck) ANALOG DOWN MIX 82 AUDIO LANGUAGE 22 D. RANGE
  • JVC HR-XVC33U | Instruction Manual - Page 189
    release the Parental Lock 59 Playback (DVD deck 42 - 67 Playback (JPEG 66 - 67 Playback (MP3/WMA 63 - 64 Playback (VCR deck 28 - 31 Playback Control ( Remote Control Functions 72 Repeat Playback 31, 50, 64, 67 Resume Function 45 S Satellite Auto Recording 41 Scan Mode Set (DVD deck
  • JVC HR-XVC33U | Instruction Manual - Page 190
    (Only in U.S.A.) HOW TO LOCATE YOUR JVC SERVICE CENTER TOLL FREE: 1-800-537-5722 http://www.jvc.com Dear Customer, In order to receive the most satisfaction from your purchase, please read the instruction booklet before operating the unit. In the event that repair is necessary, or for the
  • JVC HR-XVC33U | Instruction Manual - Page 191
    bill of sale plus a letter of explanation of the problem to the nearest JVC Factory Service Center, the name and location of which will be Manual, normal maintenance, video and audio head cleaning; 4. Damage that occurs in shipment, due to act of God, and cosmetic damage; 5. Signal reception problems
  • JVC HR-XVC33U | Instruction Manual - Page 192
    HR-XVS44U EN Printed in Beijing 0803-TY-ID-BJ
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
DVD PLAYER &
VIDEO CASSETTE RECORDER
INSTRUCTIONS
LPT0853-001B
HR-XVC33U
For Customer Use:
Enter below the Model No. and
Serial No. which are located on the
rear of cabinet. Retain this
information for future reference.
Model No.
Serial No.