JVC HR-XVC33U Instruction Manual - Page 37
Enter the channel position., Set the tape speed., Return to the normal screen.
View all JVC HR-XVC33U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
F Enter the channel position. Press CH +/-. G Set the tape speed. Press SP/EP. H Return to the normal screen. Press PROG. or OK. "PROGRAM COMPLETED" appears on the TV screen for about 5 seconds, then the normal screen appears. If "PROGRAM NOT COMPLETED PROGRAM OVERLAP" appears on the TV screen, see page 40. ● Repeat steps B - H for each additional program. I Engage the unit's timer mode. Press TIMER. The unit turns off automatically and "#" appears on the front display panel. ● To disengage the timer mode, press TIMER again. To Timer-Record Weekly Or Daily Serials: - anytime during steps C through G, press WEEKLY (number key "9") for weekly serials or DAILY (number key "8") for daily serials (Monday - Friday). Either "WEEKLY" or "DAILY" appears on the TV screen. Pressing the button again makes the corresponding indication disappear. EN 37 NOTES: ● You can program this unit to timer-record as many as 8 programs. If you try to program the unit to record a ninth, "PROGRAM FULL" appears on the TV screen. To record the extra program, you must first cancel any unnecessary programs. (੬ pg. 39) ● In case of a power failure after programing, the unit's memory backup keeps your selections for approximately 5 seconds. ● Programs that start after midnight must have the next day's date. Cable Box or DBS Receiver Users To timer-record a satellite broadcast using Express Timer Programing: A Perform steps A - I. Enter "F-1" for the channel position in step F. B Set the DBS receiver to the appropriate channel before the selected program begins. C Leave the DBS receiver's power on.