JVC HR-XVC33U Instruction Manual - Page 72
Remote
View all JVC HR-XVC33U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
72 EN Remote Control Functions Remote A/B/C/D Code Switching The Remote is capable of controlling four JVC video units independently. Each of units can respond to one of four codes (A, B, C or D). The remote control is preset to send A code signals because your unit is initially set to respond to A code signals. You can easily modify your unit to respond to B, C or D code signals. Before performing the following steps: Slide the TV/VCR/DVD switch to the right. REMOTE On the Remote Keep pressing VCR down during steps A - B. A Change the remote control code. Press the number key "1" for A, "2" for B, "3" for C or "4" for D. B Set the remote control code. Press OK to set the code. On the unit C Turn off the unit. Press POWER (1). D Display the code. Press PLAY (4) on the unit for over 5 seconds while the unit is turned off. The code currently set appears on the front display panel. ● If the code displayed on the front display panel is different from the code set on the Remote, go to step E. E Change the unit's code. Press STOP (8) on the Remote. The code currently set on the Remote will be applied to the unit. NOTE: Once you unplug the end of the mains power cord from the mains, the remote control code is back to A.