JVC KD-X230 Instruction Manual - Page 17

Wiring connection Fuse (10 A) Rear/subwoofer output Antenna terminal When connecting to an external amplifier, connect its ground wire to the car's chassis to avoid damaging the unit. Part list for installation (A) Faceplate Connecting the ISO connectors on some VW/ Audi or Opel (Vauxhall) automobiles You may need to modify the wiring of the supplied wiring harness as illustrated below. A7 (Red) Ignition wire (Red) Yellow (Battery wire) Red (Ignition wire) If no connections are made, do not let the wire come out from the tab. Light blue/yellow (Steering remote control wire) STEERING WHEEL REMOTE To the steering wheel remote control adapter Pin Color and function Vehicle A4 (Yellow) Default wiring Unit Battery wire (Yellow) Red (A7) Yellow (A4) A2 Brown A4 Yellow A5 Blue/White A6 Orange/white A7 Red A8 Black : Mobile phone system : Battery : Power control : Car light control switch : Ignition (ACC) : Earth (ground) connection * You can also connect a subwoofer speaker directly without an external subwoofer amplifier. For setting, 10. If your car does not have an ISO terminal We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer. ISO connectors B1 Purple ] : Rear speaker (right) B2 Purple/black [ B3 Gray ] : Front speaker (right) B4 Gray/black [ B5 White ] : Front speaker (left) B6 White/black [ B7 Green ] : Rear speaker (left)* B8 Green/black [ (B) Trim plate (C) Mounting sleeve (D) Wiring harness (E) Extraction key ENGLISH 15