JVC KD-X230 Instruction Manual - Page 6

GETTING STARTED 1 Cancel the demonstration When you turn on the power (or after you reset the unit), the display shows: "CANCEL DEMO" "PRESS" "VOLUME KNOB" 1 Press the volume knob. [YES] is selected for the initial setup. 2 Press the volume knob again. "DEMO OFF" appears. 2 Set the clock 1 Press and hold . 2 Turn the volume knob to select [CLOCK], then press the knob. 3 Turn the volume knob to select [CLOCK SET], then press the knob. 4 Turn the volume knob to make the settings, then press the knob. Day Hour Minute 5 Turn the volume knob to select [24H/ 12H], then press the knob. 6 Turn the volume knob to select [12 HOUR] or [24 HOUR], then press the knob. 7 Press to exit. To return to the previous setting item, press . 3 Set the basic settings 1 Press and hold . 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected or activated. 4 Press to exit. To return to the previous setting item, press . Default: XX SETTINGS BEEP ON: Activates the keypress tone. ; OFF: Deactivates. SRC SELECT AM * ON: Enables AM in source selection. ; OFF: Disables. AUX * BT ADAPTER: Selects when the KS-BTA100 Bluetooth adapter is connected to the AUX jack. ( 6) ; ON: Enables AUX in source selection. ; OFF: Disables. F/W UPDATE SYSTEM F/W xxxx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated). For details on how to update the firmware, see: . CLOCK CLOCK SYNC AUTO: The clock time is automatically set using the Clock Time (CT) data in FM Radio Data System signal. ; OFF: Cancels. CLOCK DISP ON: The clock time is shown on the display even when the unit is turned off. ; OFF: Cancels. ENGLISH ESPANOL Select the display language for menu and music information if applicable. By default, ENGLISH is selected. * Not displayed when the corresponding source is selected. 4