Jabra SP700 User Manual - Page 13

Using FM transmitter when voice announcement function is off If voice announcement function is turned off you can select any of the pre-programmed frequency channels in the following order: english Channel No Preprogrammed Frequency LED indication (FM Frequency selection mode) Battery Call status status Bluetooth FM status status 1 88.1 MHz off off on 2 88.3 MHz off on off 3 88.5 MHz on off off 4 88.7 MHz off on on Flash 5 88.9 MHz on off on 6 89.1 MHz on on off 7 89.3 MHz on on on To select the desired FM frequency channel, follow these steps: - Connect your mobile phone and speakerphone. - Press FM button to enter FM mode. The default frequency channel is 88.1MHz - Press the Volume Up or Volume Down button to move to the next/previous channel. - Manually tune your radio to the same FM frequency and you are now ready to transmit calls or music from your phone to your car stereo. Note1: While changing frequencies, FM Status Indicator flashes every 1 second. Note2: While changing frequencies, a repeated beep-tone will be heard and frequencies can be recognized by the combinations of Status Indicators. (See the table above.) Caller ID When you have an incoming call the speakerphone will announce the number of the caller. If your radio supports RDS Text the phone number will furthermore be showed on the radio display. Jabra SP700 12